Skip to main content ↑ ↓
Topic: Looking for a set of injectors for an 1987 Thunderbird Motor (Read 687 times) previous topic - next topic

Looking for a set of injectors for an 1987 Thunderbird Motor

I think one of my injectors may be bad, looking for known a good set to swap them to test. Engine is a 1987 5.0 SO out of a thunderbird. Not looking to spend a lot of money on a whim for a guess, but I'm not sure what else to do.

Looking for a set of injectors for an 1987 Thunderbird Motor

Reply #1 –
This should be in parts wanted... Pm me and I'll pull my extra set off for you after work tommorrow.
Quote from: jcassity
I honestly dont think you could exceed the cost of a new car buy installing new *stock* parts everywhere in your coug our tbird. Its just plain impossible. You could revamp the entire drivetrain/engine/suspenstion and still come out ahead.
Hooligans! 
1988 Crown Vic wagon. 120K California car. Wifes grocery getter. (junked)
1987 Ford Thunderbird LX. 5.0. s.o., sn-95 t-5 and an f-150 clutch. Driven daily and going strong.
1986 cougar.
lilsammywasapunkrocker@yahoo.com

Looking for a set of injectors for an 1987 Thunderbird Motor

Reply #2 –
Probably should also say whether you need the 14 pounders for a SO engine, or 19 pound units for the HO
Just sayin'.. ;)
'98 Explorer 5.0
'20 Malibu (I know, Chevy, but, 35MPG. Let's go brandon, eh)

Looking for a set of injectors for an 1987 Thunderbird Motor

Reply #3 –
Correct....what size engine?
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

Looking for a set of injectors for an 1987 Thunderbird Motor

Reply #4 –
Quote from: Haystack;331022
This should be in parts wanted... Pm me and I'll pull my extra set off for you after work tommorrow.


Isn't it already in parts wanted? lol

Looking for a set of injectors for an 1987 Thunderbird Motor

Reply #5 –
It was moved. What's the engine size?
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

Looking for a set of injectors for an 1987 Thunderbird Motor

Reply #6 –
Vinnie , he has a SO 302, he edited the original post
Fox-less at the moment

Looking for a set of injectors for an 1987 Thunderbird Motor

Reply #7 –
H.O or non H.O?
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

Looking for a set of injectors for an 1987 Thunderbird Motor

Reply #8 –
Quote from: vinnietbird;331072
H.O or non H.O?

non, it came outta a '87 'bird :)
If worms had daggers, birds wouldn't f**k with 'em

Looking for a set of injectors for an 1987 Thunderbird Motor

Reply #9 –
Around here,you have to ask.,there have been a lot of H.O conversions done.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

Looking for a set of injectors for an 1987 Thunderbird Motor

Reply #10 –
I have a set, why, no clue. there yours for $10 shipped.
Old Grey Cat to this.88 Cat, 5.0 HO, CW mounts, mass air, CI custom cam, afr165's, Tmoss worked cobra intake, BBK shorty's,off road h pipe, magnaflow ex. T-5,spec stage 2 clutch, 8.8 373 TC trac loc, che ajustables with bullits on the rear. 11" brakes up front. +

Looking for a set of injectors for an 1987 Thunderbird Motor

Reply #11 –
I thought I had eight 14#'ers around here, but I can't seem to locate the little shiznits. Anyway, looks like Kitz has got it covered :D

SO=???????, 14lb
HO=Orange, 19lb

(just in case anybody is forgetful like I am..I can't remember what color the 14's are...ughh)
'98 Explorer 5.0
'20 Malibu (I know, Chevy, but, 35MPG. Let's go brandon, eh)
 

Looking for a set of injectors for an 1987 Thunderbird Motor

Reply #12 –
Quote from: Kitz Kat;331077
I have a set, why, no clue. there yours for $10 shipped.


Are they good? lol