Skip to main content ↑ ↓
Topic: 1.6 roller rockers.... (Read 1204 times) previous topic - next topic

1.6 roller rockers....

If anyone has a complete set,fasteners and all,I'd do a partial trade....$200.00 plus the rockers for my spare 140 mph speedo.Beautiful shape,ready to install.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

1.6 roller rockers....

Reply #1 –
You want $200.00 + a set of 1.6 roller rockers for a 140 mph speedometer? Or am I reading this wrong.
FORD The Pacemaker of a CHEVY

1.6 roller rockers....

Reply #2 –
Hey Vinnie, I know you say you don't drink, but what yu smokin?
What you want?
Old Grey Cat to this.88 Cat, 5.0 HO, CW mounts, mass air, CI custom cam, afr165's, Tmoss worked cobra intake, BBK shorty's,off road h pipe, magnaflow ex. T-5,spec stage 2 clutch, 8.8 373 TC trac loc, che ajustables with bullits on the rear. 11" brakes up front. +

1.6 roller rockers....

Reply #3 –
Actually it's not unreasonable.....

http://cgi.ebay.com/ebaymotors/Thunderbird-Turbo-Coupe-Sport-FMS-140-mph-speedometer-_W0QQcmdZViewItemQQhashZitem3eff4cf12fQQitemZ270571204911QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories
-- 05 Mustang GT-Whipplecharged !!
--87 5.0 Trick Flow Heads & Intake - Custom Cam - Many other goodies...3100Lbs...Low12's!

1.6 roller rockers....

Reply #4 –
Yep,I'm wanting a set of 1.6 roller rockers,and $200.00. You all have seen the prices of the 140 speedos,I have one on Ebay (shown above) and it's cheaper than most sell for.If someone want to make the deal....great. If not,I'm not out anything except a "no deal".....which I'll live through. If the speedo sells on Ebay,then I'll use that money for a set of rockers.Every time I've had one of these speedos,I've sold them for $300-$350 each. If someone had some rockers they don't need,and want the speedo for cheaper than usual,here's the chance to make it happen.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

1.6 roller rockers....

Reply #5 –
I have an old wooden rocker you could have.....:D
[SIGPIC][/SIGPIC]
***** Project "EVOLUTION" 1987 Cougar LS  & 1985 Cougar Convertible *****
[/COLOR]
5.0 HO 306 roller block, machined GT-40P heads, Wiseco dished forged pistons, Eagle forged floating I-beam connecting rods, Lunati pushrods, ARP bolts, Scorpion aluminum 1.6 rockers, Comp Cams Magnum 266HR, Explorer intake, 65mm TB, MAF Conversion, 19# injectors, Ford Racing stainless P-headers, 2-1/2" cat-less exhaust w/ Flowtech Afterburner lers , SC AOD with 2800 BDR torque converter, 3.73 T-Lok rear, CHE rear control arms, full 2-1/2" frame w/1" jacking rails & seat supports, Rear disk brakes, Turbine wheels, All original interior w/ floor shift upgrade .......
Pretty much every panel on my 87 is new, rebuilt, or re constructed. :D
Join us on Facebook
http://www.facebook.com/home.php?sk=group_137541156293768&ap=1

1.6 roller rockers....

Reply #6 –
I'll need 16 of them,and they need to fit under the valve covers I have.LOL.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

1.6 roller rockers....

Reply #7 –
O.K.,$175 and the rockers.No lower.Give 'em up.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

1.6 roller rockers....

Reply #8 –
pedestal or stud mount?
1979 Ford Fairmont
[/B]
5.0L/4R70W/8.8"/5-lug/3" Exhuast

1.6 roller rockers....

Reply #9 –
Pedestal.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

1.6 roller rockers....

Reply #10 –
I thought you just bought 1.7 cobra rockers off the corral like a week or two ago???

1.6 roller rockers....

Reply #11 –
Quote from: dominator;320384
I thought you just bought 1.7 cobra rockers off the corral like a week or two ago???


Hey, you did.... Didn't you?
Weren't you going to use them on this motor
[SIGPIC][/SIGPIC]
***** Project "EVOLUTION" 1987 Cougar LS  & 1985 Cougar Convertible *****
[/COLOR]
5.0 HO 306 roller block, machined GT-40P heads, Wiseco dished forged pistons, Eagle forged floating I-beam connecting rods, Lunati pushrods, ARP bolts, Scorpion aluminum 1.6 rockers, Comp Cams Magnum 266HR, Explorer intake, 65mm TB, MAF Conversion, 19# injectors, Ford Racing stainless P-headers, 2-1/2" cat-less exhaust w/ Flowtech Afterburner lers , SC AOD with 2800 BDR torque converter, 3.73 T-Lok rear, CHE rear control arms, full 2-1/2" frame w/1" jacking rails & seat supports, Rear disk brakes, Turbine wheels, All original interior w/ floor shift upgrade .......
Pretty much every panel on my 87 is new, rebuilt, or re constructed. :D
Join us on Facebook
http://www.facebook.com/home.php?sk=group_137541156293768&ap=1

1.6 roller rockers....

Reply #12 –
I did some trading for them.After the 8 bent push rods,I sold them for a big profit and decided to stay with the 1.6's.Well,now that the springs are fixed,I could go either way.I could've kept the 1'7's,but,I did end up with a nice profit from them,and was able to get a few things I needed for the Sport.I'll find a set,I'm patient.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

1.6 roller rockers....

Reply #13 –
He had to sell them to cover the cost of the damage they did. LOL!
1979 Ford Fairmont
[/B]
5.0L/4R70W/8.8"/5-lug/3" Exhuast

1.6 roller rockers....

Reply #14 –
Luckily I got out for free.I had the rockers and rods from engine "A" to use on engine "B".I still owe the machine shop owner a big strawberry milkshake.I'll pay up on my next day off.

Rockers anyone?
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..