Skip to main content ↑ ↓
Topic: This is really neato (Read 1203 times) previous topic - next topic
 

This is really neato

Reply #1 –
Weird.
1986 Mercury Cougar - 2.3T/T5 swap, TC brakes and suspension and rearend, 3" exhaust, 255 lph fuel pump, Stinger BOV, Gillis MBC @ 18 psi
2003 Chevy Suburban Z71 - Daily driver
2015 Chevy Volt - Wife's daily driver

This is really neato

Reply #2 –
That would be awesome for highway trips,long drives.Not pretty,but very functional.That would stop a lot of front end abuse.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

This is really neato

Reply #3 –
Seems like a good idea but would it not scuff your paint?  I would think that having that thing rubbing against the surface of the car might be worse than just dealing with bug guts and rock chips.
'88 'bird, 10.9:1 306 w/TFS top end, forged rods/pistons, T-5 swap & bunch of other stuff, 1-family owned, had it since ‘98, 5.0tbrd88 on Instagram and YouTube

This is really neato

Reply #4 –
i can see it on a dd but besides that nothing else

This is really neato

Reply #5 –
If you look close,you can see the little rubber "dots" inside to keep it from rubbing the paint.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

This is really neato

Reply #6 –
I remember those from back in the day...been a long time. Cool.

And yes, the rubber nubs did rub the paint.

If it were me, I'd hang it on the garage wall just to look at it. ;)

This is really neato

Reply #7 –
Never seen one of those, that is really neat.
1985 T'Bird 5.0
1987 Cougar 3.8
1992 T'bird Sport 5.0 HO

This is really neato

Reply #8 –
never seen this before, pretty neat.
 wonder what other cars had this kind of thing available to them.
"Beating the hell out of other peoples cars since 1999"
1983 Ford Thunderbird Heritage
1984 Ford Mustang GT Turbo Convertible
2015 Ford Focus SE 1.0 EcoBoost

This is really neato

Reply #9 –
Seems to me that with a little bit of fab work you can make on hell of a lightweight nose for a drag car outta that.:D
41 Dodge Luxury Liner Sedan
78 F-100 2wd flareside
84Turbo Coupe
84 Thunderbird Élan
85 Thunderbird 3.8
88 Turbo Coupe
88 Mustang GT
90 Stang LX 5.0 5spd
93 F-150 4x4 ext cab
96 Mustang GT
98 Mustang GT
99 SVT Cobra
06 Fusion SEL
14 Fusion Sport

This is really neato

Reply #10 –
Learn something new every day.
-- 05 Mustang GT-Whipplecharged !!
--87 5.0 Trick Flow Heads & Intake - Custom Cam - Many other goodies...3100Lbs...Low12's!

This is really neato

Reply #11 –
Wouldnt that restrict ALOT of air going into the radiator?
My toys:
Two 84 Turbo Coupes-twins
Two 86 Mercury Capri's-one's stock, one's NOT
93 Mustang LX 5.0-3,980 miles, 100% factory
55 Ford Customline-I6 powerhouse, waiting on a plan
95 F350 Dually-KILLER, don't ask why
94 Bronco XLT-going to be a lowered 2 wheel drive

This is really neato

Reply #12 –
Quote from: Ductape91;315875
wonder what other cars had this kind of thing available to them.


I have one in the garage for a fox body mustang.

Scott
1980 birds X 3, 1982 bird, 1984 XR7, 1988 TC

This is really neato

Reply #13 –
Quote from: Silver5oh;316331
Wouldnt that restrict ALOT of air going into the radiator?

It's probably meant for a Turbo Coupe. They get their air from a scoop under the bumper, their header panel was one solid piece. Some Mustangs do the same thing.
2002 Honda Civic EX

1984 Ford Thunderbird Elan
5.0 CFI, T5, Dual Exhaust

This is really neato

Reply #14 –
I remember those...... [SIZE="1"]now I feel old[/SIZE]
They were kinda ugly when installed
[SIGPIC][/SIGPIC]
***** Project "EVOLUTION" 1987 Cougar LS  & 1985 Cougar Convertible *****
[/COLOR]
5.0 HO 306 roller block, machined GT-40P heads, Wiseco dished forged pistons, Eagle forged floating I-beam connecting rods, Lunati pushrods, ARP bolts, Scorpion aluminum 1.6 rockers, Comp Cams Magnum 266HR, Explorer intake, 65mm TB, MAF Conversion, 19# injectors, Ford Racing stainless P-headers, 2-1/2" cat-less exhaust w/ Flowtech Afterburner lers , SC AOD with 2800 BDR torque converter, 3.73 T-Lok rear, CHE rear control arms, full 2-1/2" frame w/1" jacking rails & seat supports, Rear disk brakes, Turbine wheels, All original interior w/ floor shift upgrade .......
Pretty much every panel on my 87 is new, rebuilt, or re constructed. :D
Join us on Facebook
http://www.facebook.com/home.php?sk=group_137541156293768&ap=1