Skip to main content ↑ ↓
Topic: More vibration issues..... (Read 15487 times) previous topic - next topic

More vibration issues.....

Reply #75 –
incidentally Vinnie, we have 2 tire stores in oklahoma city call if you want their number

More vibration issues.....

Reply #76 –
I've had the vibration with the 8 hole wheels,10 hole wheels,turbines,silver Cobra R wheels,chrome Cobra R wheels and now the 10th ann. Cobra wheels.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

More vibration issues.....

Reply #77 –
Same with me, the vibration has been there (and been the same) with swapping 3 different sets of wheels and tires.
Save a horse, ride a Cougrrr!
1988 Mercury Cougar - 5.0HO, 3G, AOD w/shift kit, 4.10 gears in 8.8, Mass Air, CAI, Pypes X-pipe, Pypes 2 1/2" exhaust, Pypes Violator lers
1997 Ford Mustang GT - stock
2000 Ford Ranger 4X4 4.0 - stock
2001 Mercury Grand Marquis- stock
2008 Ford Escape 4X4 - stock

More vibration issues.....

Reply #78 –
No DS today.My guess is that the weather is causing the delay.It's probably a good thing.I don't need to be on the ground in the snow swapping the drive shaft out..............On second thought,yes I do.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

More vibration issues.....

Reply #79 –
If it snows 1" they call it the worst blizzard of the century there and shut down all schools. Snowed 2" here today an noone noticed...
Quote from: jcassity
I honestly dont think you could exceed the cost of a new car buy installing new *stock* parts everywhere in your coug our tbird. Its just plain impossible. You could revamp the entire drivetrain/engine/suspenstion and still come out ahead.
Hooligans! 
1988 Crown Vic wagon. 120K California car. Wifes grocery getter. (junked)
1987 Ford Thunderbird LX. 5.0. s.o., sn-95 t-5 and an f-150 clutch. Driven daily and going strong.
1986 cougar.
lilsammywasapunkrocker@yahoo.com

More vibration issues.....

Reply #80 –
They closed school here for Friday and didn;'t need to.I think the school faculty wanted a day off more than anything.

Wish me luck guys,I hope the DS is here tomorrow.It may not be necessary,but I am really excited.I always wanted an aluminum DS for the car,but had seen one for sale and it was really expensive.I had never thought of going the route I did until recently.I'm glad I did.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

More vibration issues.....

Reply #81 –
Got up to 37* here today, and bright sun:flip:

I was running a chainsaw most of the afternoon...lol

We had the snow and crud a coupla weeks...I'm done with it.

V-man, I've felt your pain...I've had to change my oil in snow, heat, wind, rain, you name it....never again. I don't care if I have lay on a piece of cardboard on a cat piss-reeking dirt floor in  December, still beats laying snow to work on a vehicle. This ain't a jab at people who can't afford or don't have a shed/building/etc...just sayin'. :hick:
'98 Explorer 5.0
'20 Malibu (I know, Chevy, but, 35MPG. Let's go brandon, eh)

More vibration issues.....

Reply #82 –
It's supposed to be in the 50's this week.The driveshaft,if it comes tomorrow,will probably installed by Tuesday at the latest.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

More vibration issues.....

Reply #83 –
Some of us are probably as anxious as you are to find out the result.
;)
'98 Explorer 5.0
'20 Malibu (I know, Chevy, but, 35MPG. Let's go brandon, eh)

More vibration issues.....

Reply #84 –
Well,almost as anxious.Hopefully tomorrow.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

More vibration issues.....

Reply #85 –
So you think tomorrow huh? :beatyoass: j/k
John

More vibration issues.....

Reply #86 –
I HOPE tomorrow.Believe me,you guys will be second only to me to know when it arrives.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

More vibration issues.....

Reply #87 –
Well,I got home and there was a surprise on the porch.My drive shaft was here.I didn't have time to install it,but first thing after work tomorrow,it'll be on the Sport,and an update will be given.

A reminder to everyone....when you start a thread,give the final results of the problem.Too many ask questions,then there are 5 pages of answers and more questions on the thread,then,nothing.We need a beginning,middle,and an end.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..
 

More vibration issues.....

Reply #88 –
One drive shaft picture.....

'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

More vibration issues.....

Reply #89 –
You need to go ahead and install that tonight so we can all rest easy that your vibration is taken care of!  And I thought you were dedicated!  Shame shame...lol
'88 'bird, 10.9:1 306 w/TFS top end, forged rods/pistons, T-5 swap & bunch of other stuff, 1-family owned, had it since ‘98, 5.0tbrd88 on Instagram and YouTube