Skip to main content ↑ ↓
Topic: mustang rim conversion (Read 1254 times) previous topic - next topic

mustang rim conversion

guys, will rims from a 88 mustang gt fit a sport. they are 15 inch 4 lugs. mine are 14 in 4 lugs. thanks dwight

mustang rim conversion

Reply #1 –
Yes they will. You should go through the "Post your wheels" thread or try the search function. ;)

'88 Mercury Cougar LS, 302, Project Car - "The Coug"
'83 Ford Thunderbird Heritage, 302, Summer Ride, - "The Bambi Killer"
'86 Chevrolet S10, Daily Driver -  "The Black Beater"

mustang rim conversion

Reply #2 –
opps! im bad! thanks for the info:D

mustang rim conversion

Reply #3 –
Any Fox Mustang wheel will fit our cars.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

mustang rim conversion

Reply #4 –
You should read through Eric's site. every question you may ever have could probably be answered there. Plus it's just plain cool there.
[SIGPIC][/SIGPIC]
***** Project "EVOLUTION" 1987 Cougar LS  & 1985 Cougar Convertible *****
[/COLOR]
5.0 HO 306 roller block, machined GT-40P heads, Wiseco dished forged pistons, Eagle forged floating I-beam connecting rods, Lunati pushrods, ARP bolts, Scorpion aluminum 1.6 rockers, Comp Cams Magnum 266HR, Explorer intake, 65mm TB, MAF Conversion, 19# injectors, Ford Racing stainless P-headers, 2-1/2" cat-less exhaust w/ Flowtech Afterburner lers , SC AOD with 2800 BDR torque converter, 3.73 T-Lok rear, CHE rear control arms, full 2-1/2" frame w/1" jacking rails & seat supports, Rear disk brakes, Turbine wheels, All original interior w/ floor shift upgrade .......
Pretty much every panel on my 87 is new, rebuilt, or re constructed. :D
Join us on Facebook
http://www.facebook.com/home.php?sk=group_137541156293768&ap=1
 

mustang rim conversion

Reply #5 –
ill do! thanks

mustang rim conversion

Reply #6 –
It will end up looking like this...........
[/IMG]

mustang rim conversion

Reply #7 –
Of all the Fox wheels made by Ford,I like the Turbines the best (with wider tires).I do NOT like skinny tires..
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..