Skip to main content ↑ ↓
Topic: did good at the pick-a-part today (Read 1064 times) previous topic - next topic

did good at the pick-a-part today

all i really needed was some fasteners, but i found a few items worth getting to sell.

black mustang door panels
black mustang sun visors
2x mustang cowl grills


these im keeping:
air deflecter
sbf mini starter
AOD dipstick and tube
seat mounting bolts
starter bolts
motor mount nuts
hood hinge bolts
bumper cover nuts

and believe it or not i was there from 9:30 to about 3:45. there was a couple of 4-eyed birds out there, but both were V6's and body damage.
1979 Ford Fairmont
[/B]
5.0L/4R70W/8.8"/5-lug/3" Exhuast

did good at the pick-a-part today

Reply #1 –
Well....all three things are Rustang stuff.....!!!!! This helps us how!!!!??????? :mad: :wtf::laughing::laughing:
 
jk man good score
1987 20th Anniversary Cougar, 302 "5.0" GT-40 heads (F3ZE '93 Cobra) and TMoss Ported H.O. intake, H.O. camshaft
2.5" Duals, no cats, Flowmaster 40s, Richmond 3.73s w/ Trac-Lok, maxed out Baumann shift kit, 3000 RPM Dirty Dog non-lock TC
Aside from the Mustang crinkle headers, still looks like it's only 150 HP...
1988 Black XR7 Trick Flow top end, Tremec 3550
1988 Black XR7 Procharger P600B intercooled, Edelbrock Performer non-RPM heads, GT40 intake AOD, 13 PSI @5000 RPM. 93 octane

did good at the pick-a-part today

Reply #2 –
Nice find.I'd like to find an untouched Stang GT at the boneyard.I'd be on it like a piranha on a piece of meat. It's supposed to be up around 72 degrees tomorrow,so,I'm going to pick up the differential and anything else that can make the Sport some money (the diff. is mine).
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

did good at the pick-a-part today

Reply #3 –
what do you need/want from a stock GT?
1979 Ford Fairmont
[/B]
5.0L/4R70W/8.8"/5-lug/3" Exhuast

did good at the pick-a-part today

Reply #4 –
A9L,a/c brackets,steering pump bracket,maybe the seats,GT steering wheel.........If I can find the car at the yards I go to,I can all that for $25.00 or so.If I buy it from the internet,forums,Ebay,etc,I'll spend a lot.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..
 

did good at the pick-a-part today

Reply #5 –
i need to move to Okrahoma!
1979 Ford Fairmont
[/B]
5.0L/4R70W/8.8"/5-lug/3" Exhuast

did good at the pick-a-part today

Reply #6 –
Not all yards are cheap,but the ones I've gone to for the last 12 years are.Once you really get to know the owners,you're "in". I once told Bill (owner of one of the yards) that I'd work for parts when he was short handed.He had trouble for a while keeping help.I'd work about 6 1/2 hours (not doing much),and he'd say to get what I wanted.Not bad.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..