Skip to main content ↑ ↓
Topic: 5 lug axles turbo coupe rear brake ? (Read 2819 times) previous topic - next topic

5 lug axles turbo coupe rear brake ?

Would it be possible to use 94-98 Mustang axles in a turbocoupe rear end, drill out the rotors and be good to go?

 Thanks,
  Mike
[SIGPIC][/SIGPIC]88 t-bird: 5.0ho, gt40y, crane 2031, fms 1.7, paxton@5#, aod wide ratio, tci stall, performer rpm upper, 70mm bbk, pro m 60, 42#s, 3.73 7.5" posi, jba shorties, borla, upr x. 13.4 @ 104mph. cbaza, moates, tuned by decipha

? answered in tech

Reply #1 –
It doesn't look like bolt and go. A MarkVII or 94-98 Sn-95 would have been a better choice. :mad:
[SIGPIC][/SIGPIC]88 t-bird: 5.0ho, gt40y, crane 2031, fms 1.7, paxton@5#, aod wide ratio, tci stall, performer rpm upper, 70mm bbk, pro m 60, 42#s, 3.73 7.5" posi, jba shorties, borla, upr x. 13.4 @ 104mph. cbaza, moates, tuned by decipha

5 lug axles turbo coupe rear brake ?

Reply #2 –
How about Mark VII disc set up on a Bird/Cougar 8.8?  What 5 lug axles??? left Rangers/right Areostars?   
I'm converting an 87 V6,AOD/7.5 set up to a 5.0HO,beefy AOD,8.8 I'd like to do a 5lug conversion ect,will Mk VII front rotors and calipers fit my 87 Bird spindles?
or do I need a pair from a Mustang?
Also,what master cyl and prop valve will I need?

A bunch of questions I know but a well planned out project makes a big difference!

5 lug axles turbo coupe rear brake ?

Reply #3 –
http://www.sn95brakes.com/5lug.php
-- 05 Mustang GT-Whipplecharged !!
--87 5.0 Trick Flow Heads & Intake - Custom Cam - Many other goodies...3100Lbs...Low12's!

5 lug axles turbo coupe rear brake ?

Reply #4 –
Quote from: t.birdsc;298712
Would it be possible to use 94-98 Mustang axles in a turbocoupe rear end, drill out the rotors and be good to go?

 Thanks,
  Mike


yes mine was that way for YEARS sometimes you have to open the center hole in the rotors slightly
[SIGPIC][/SIGPIC]
1974 maverick lsx powered turbo car SOLD
1973 maverick Tijuana Taxi Tribute
1957 chevy LSX Turbo project (race car)
Owner of Joe Dirt Fabrication

5 lug axles turbo coupe rear brake ?

Reply #5 –
Yes.  Redrill the axles to 5-lug and open the center hole to match the larger hub on the SN-95 axles.
Long live the 4-eyes!  - '83 Tbird Turbo - '85 Marquis LTS - '86 LTD Wagon

should have waited

Reply #6 –
lol. the 17x9 cobra's se the strut during the "prefit" The lugs are pita and that's without any attempt to put the rear end and brakes on yet. It's raining like crazy and always seems like something to stop you :toilet:
[SIGPIC][/SIGPIC]88 t-bird: 5.0ho, gt40y, crane 2031, fms 1.7, paxton@5#, aod wide ratio, tci stall, performer rpm upper, 70mm bbk, pro m 60, 42#s, 3.73 7.5" posi, jba shorties, borla, upr x. 13.4 @ 104mph. cbaza, moates, tuned by decipha
 

5 lug axles turbo coupe rear brake ?

Reply #7 –
nice looking bird!!!
RIP 1988 and 1990 Lincoln Mark VII LSC
I welcomed the dark side and currently am driving a 2000 Dodge Durango SLT plus, with a 5.9, Code named project "Night Runner"
Shes black on black, fully loaded, with headers, 180 tstat, e fan, straight exhaust into a cherry bomb vortex ler, full tune up, ported intake and T/B, MSD coil, and round aircleaner.
Mods to come: Fully rebuilt and heavily modded 46RE, and a richmond rachet locker.
my $300 beater ;)
R.I.P Kayleigh Raposa 12/18/90 - 2/24/07

Always something

Reply #8 –
Lol. the 17x9 cobra rims rub on the strut during the "test" fit and that's w/o the ft. brakes, springs and rear end yet! It's been raining like crazy and there will likely be more to get in the way of completing this project. :mullet:
[SIGPIC][/SIGPIC]88 t-bird: 5.0ho, gt40y, crane 2031, fms 1.7, paxton@5#, aod wide ratio, tci stall, performer rpm upper, 70mm bbk, pro m 60, 42#s, 3.73 7.5" posi, jba shorties, borla, upr x. 13.4 @ 104mph. cbaza, moates, tuned by decipha

5 lug axles turbo coupe rear brake ?

Reply #9 –
Quote from: daboss351;302765
nice looking bird!!!


Thanks.
It's got some headache issues, but even so it's still a good daily driver. Slow.......but it gets me to work. :rollin:
[SIGPIC][/SIGPIC]88 t-bird: 5.0ho, gt40y, crane 2031, fms 1.7, paxton@5#, aod wide ratio, tci stall, performer rpm upper, 70mm bbk, pro m 60, 42#s, 3.73 7.5" posi, jba shorties, borla, upr x. 13.4 @ 104mph. cbaza, moates, tuned by decipha

5 lug axles turbo coupe rear brake ?

Reply #10 –
Quote from: V8Demon;300974
http://www.sn95brakes.com/5lug.php


Oooh, good reading on that one!
1983 Tbird with '03 Split Port V6 motor swap done! Headers, dual exhaust, 500CFM Edelbrock, 3G upgrade, Electric fan. 3.73 Gears and an FRPP Limited Slip. Five lug complete! 5-Speed conversion complete! Standalone Fuel Injection in progress...

5 lug axles turbo coupe rear brake ?

Reply #11 –
I want one bad since ive been driving my dads turbo coupe I hope he buys one for me that he found.
RIP 1988 and 1990 Lincoln Mark VII LSC
I welcomed the dark side and currently am driving a 2000 Dodge Durango SLT plus, with a 5.9, Code named project "Night Runner"
Shes black on black, fully loaded, with headers, 180 tstat, e fan, straight exhaust into a cherry bomb vortex ler, full tune up, ported intake and T/B, MSD coil, and round aircleaner.
Mods to come: Fully rebuilt and heavily modded 46RE, and a richmond rachet locker.
my $300 beater ;)
R.I.P Kayleigh Raposa 12/18/90 - 2/24/07

5 lug axles turbo coupe rear brake ?

Reply #12 –
SC what color is your bird?
86 TC.......Intake, fmic ,bov ,pillar gauges......more to come