Skip to main content
Topic: Need 94-95 Mustang Spindles! (SN95) (Read 1289 times) previous topic - next topic

Need 94-95 Mustang Spindles! (SN95)

Reply #15
Man, I am feeling your pain. I have been talking to the yards around here, and if they even have them, they want $100 for bare knuckles, and $200 for loaded ones.
LKQ was $175 for the full "Knee"(Apparently includes suspension and A arms) with 200k miles on them!

I called Napa a couple days ago, and I think they found just the empty knuckle in their computer, and at the time I was looking for the spindle too(Which they didn't have listed)but I called back the other day and they could not find it.(Different guy). And I still can't find a part number on it.

P.S. That picture is supposed to be 1000x1500 dimensionally, how do you get it to show up like that?
1983 Tbird with '03 Split Port V6 motor swap done! Headers, dual exhaust, 500CFM Edelbrock, 3G upgrade, Electric fan. 3.73 Gears and an FRPP Limited Slip. Five lug complete! 5-Speed conversion complete! Standalone Fuel Injection in progress...

Need 94-95 Mustang Spindles! (SN95)

Reply #16
Humm, send the original to me at Aesthetikz@hotmail.com and i'll host it.
~Project ThunderStorm = '84 Charcoal Thunderbird - First Car - Long Time Work in Progress~
~Project (No Name Yet) = 1970 Plymouth GTX/RR "Clone"~

Need 94-95 Mustang Spindles! (SN95)

Reply #17
Still needing 94-95 SN95 Spindles and 31 Spline Proper Length Axles.
~Project ThunderStorm = '84 Charcoal Thunderbird - First Car - Long Time Work in Progress~
~Project (No Name Yet) = 1970 Plymouth GTX/RR "Clone"~

Need 94-95 Mustang Spindles! (SN95)

Reply #18
I'll buy some 94-95 spindles for about $80 shipped right now.
~Project ThunderStorm = '84 Charcoal Thunderbird - First Car - Long Time Work in Progress~
~Project (No Name Yet) = 1970 Plymouth GTX/RR "Clone"~

Need 94-95 Mustang Spindles! (SN95)

Reply #19
dont hold your breath then
1979 Ford Fairmont
[/B]
5.0L/4R70W/8.8"/5-lug/3" Exhuast


Need 94-95 Mustang Spindles! (SN95)

Reply #20
Just the bare knuckles is all i need
~Project ThunderStorm = '84 Charcoal Thunderbird - First Car - Long Time Work in Progress~
~Project (No Name Yet) = 1970 Plymouth GTX/RR "Clone"~

Need 94-95 Mustang Spindles! (SN95)

Reply #21
At current going rates you MIGHT get away with $80 EACH if you picked them up.
1983 Tbird with '03 Split Port V6 motor swap done! Headers, dual exhaust, 500CFM Edelbrock, 3G upgrade, Electric fan. 3.73 Gears and an FRPP Limited Slip. Five lug complete! 5-Speed conversion complete! Standalone Fuel Injection in progress...

Need 94-95 Mustang Spindles! (SN95)

Reply #22
Quote from: Tbird232ci;296625
I have a pair. Asking 75+ ship.


You never got back to me on these.
You still have them? Offer still stand? How much shipped to 98037 if so (Cheapest Possible Shipping Please).

I'm super bummed 'cuz i got sidetracked trying to buy 31 spl axles, And got another spindle deal taken out from under me. (would have been $80 total!).

Still in the market for these if tbird232ci doesn't isnt selling anymore, But still sticking to the $100 shipped area.

I'm stretching every bit of my car budget as far as i can~So i can get as much done with the T-Bird as possible this summer. :burnout:
~Project ThunderStorm = '84 Charcoal Thunderbird - First Car - Long Time Work in Progress~
~Project (No Name Yet) = 1970 Plymouth GTX/RR "Clone"~

Need 94-95 Mustang Spindles! (SN95)

Reply #23
Quote from: Romeo2k;305692
You never got back to me on these.
You still have them? Offer still stand? How much shipped to 98037 if so (Cheapest Possible Shipping Please).

I'm super bummed 'cuz i got sidetracked trying to buy 31 spl axles, And got another spindle deal taken out from under me. (would have been $80 total!).

Still in the market for these if tbird232ci doesn't isnt selling anymore, But still sticking to the $100 shipped area.

I'm stretching every bit of my car budget as far as i can~So i can get as much done with the T-Bird as possible this summer. :burnout:


I'm sorry I never got back to you, I've been sidetracked by a lot of life events really.

I do still have the spindles, and I'll do 100 shipped. I'll get you some pics during the week, and get them boxed before we do any sort of payment. I want to make sure I can get a box and whatnot.
It's Gumby's fault.

Need 94-95 Mustang Spindles! (SN95)

Reply #24
Awesome!
Sounds great.
~Project ThunderStorm = '84 Charcoal Thunderbird - First Car - Long Time Work in Progress~
~Project (No Name Yet) = 1970 Plymouth GTX/RR "Clone"~