Front 94 sn95 control arms August 17, 2009, 08:24:46 PM Same as 87-88 fox cougar?Thanks guysDamon Quote Selected
Front 94 sn95 control arms Reply #1 – August 17, 2009, 08:26:14 PM Ive used tubular verions before with k member but unsure about stock peices Quote Selected
Front 94 sn95 control arms Reply #2 – August 17, 2009, 10:02:43 PM Dimensionally -- the control arms themselves are the same. Apparently the recessed height for where the spring sits is slightly different. The ball joints for the SN-95 Mustangs are different as well. You can switch them out if need be depending on the rest of your setup...A thread on that is here: http://www.foxtbirdcougarforums.com/showthread.php?t=15335&highlight=ball+jointHope this helps Quote Selected
Front 94 sn95 control arms Reply #3 – August 17, 2009, 11:02:32 PM Thanks that would be great. Im picking up another xr7 this week and it needs bushings in the front. I have complete 94 sn95 setup brakes control arms and all and figured why not..Have tons of 5 lug rims lying around...Or I will throw on a set of snowflakes (yes I like them) and redo all the rebushing..Ill post some pictures of the new ride after I get it.I havent had a stock cougar in years Im excited!Thanks!Damon Quote Selected
Front 94 sn95 control arms Reply #4 – August 17, 2009, 11:05:25 PM ohhhhhh..WHat will it do to ride height? If thats what your getting at?? Quote Selected
Front 94 sn95 control arms Reply #5 – August 17, 2009, 11:10:58 PM Not enough to worry about. It's about a half inch difference. Quote Selected
Front 94 sn95 control arms Reply #8 – August 19, 2009, 03:35:48 PM Quote from: DamonSlowpokeBaumann;287036half inch lower???Quote from: V8Demon;287040Yes.Maybe 1/2". I have SN-95 control arms on my T-bird and it really doesn't look that much lower at all. Quote Selected
Front 94 sn95 control arms Reply #9 – August 19, 2009, 05:32:38 PM I'm also using the SN-95 a-frames Quote Selected
Front 94 sn95 control arms Reply #10 – August 19, 2009, 09:26:11 PM so you used the sn95 arms with the fox cougar spindles? Id at least be upgrading to the TC/mustang fox spindles or teh sn95 ones Quote Selected
Front 94 sn95 control arms Reply #11 – August 20, 2009, 09:07:41 AM Quote from: DamonSlowpokeBaumann;287244so you used the sn95 arms with the fox cougar spindles? Id at least be upgrading to the TC/mustang fox spindles or teh sn95 ones Me?Fox Mustang 11 inch spindles for me with 11 inch brakes and 73mm calipers. I'm actually still using stock Cougar A-arms. Quote Selected
Front 94 sn95 control arms Reply #12 – August 20, 2009, 11:06:43 AM If you use sn95 arms and fox spindles, you must swap to fox ball joints. Quote Selected
Front 94 sn95 control arms Reply #13 – August 20, 2009, 02:40:11 PM Quote from: V8Demon;287291Me?Fox Mustang 11 inch spindles for me with 11 inch brakes and 73mm calipers. I'm actually still using stock Cougar A-arms.Thats the setup I was running in my other cougar before I swapped to the tubular sn95 stuff Quote Selected
Front 94 sn95 control arms Reply #14 – August 20, 2009, 02:41:30 PM Quote from: mcb82gt;287310If you use sn95 arms and fox spindles, you must swap to fox ball joints.I was thinking just doing a 5 lug conversion..If not Ill do the balljoint swap..Wasnt sure if it was a direct swap Quote Selected
Topic: Front 94 sn95 control arms (Read 1517 times)
previous topic - next topic
