Skip to main content
Topic: magnum 500 wheels (Read 2421 times) previous topic - next topic

magnum 500 wheels

I've seen that cougarman has the '03 Mach 1 magnum 500 wheels on his cat.  I've been looking at the aftermarket magnum 500 for the Mustang, but it didn't label them as being '03's.  I also was looking at the Magnum 500 wheels for '05 and newer, but they have much more offset.  Then there's the older Mopar magnum 500's.  Anyone seen any of these on Foxes?
1987 TC

magnum 500 wheels

Reply #1
Then there's these that I've pondered.  I'm trying for a retro look while not looking too out of place.  It's snowing, blowing, and I'm bored.  any opinions?
1987 TC

magnum 500 wheels

Reply #2
They were '03 Mach 1 wheels, the "new" style magnum 500s, lol.
I've been looking at these for the Sport.:D
95 Ranger Splash 2.3
88 Tbird Sport :ies::ies:
5.0 SO, stainless shorty headers, w/ Magnaflow lers. KYB struts, KYB shocks. 5lug conversion from sn95 Mustang, subframe connectors, drilled and slotted rotors, 03 Mach 1 wheels. sequential taillights.140 speedo

magnum 500 wheels

Reply #3
I have wanted Ansen Sprints for a long time! I like em.

magnum 500 wheels

Reply #4
Quote from: HAVI;258766
Then there's these that I've pondered.  I'm trying for a retro look while not looking too out of place.  It's snowing, blowing, and I'm bored.  any opinions?


The first ones in come in 4 lug if you can find them.
1986 Cougar LS

magnum 500 wheels

Reply #5
I'd also LOVE to see some old rallye wheels on one of these. Maybe I'll 'chop it this weekend if I feel like it LOL. I did this awhile back with pictures of a friends car that was at JUST the right angle so the wheels looked right. Shocking how well they fit. The second I did I went "thats IT I MUST have slots" hahaha
1987 20th Anniversary Cougar, 302 "5.0" GT-40 heads (F3ZE '93 Cobra) and TMoss Ported H.O. intake, H.O. camshaft
2.5" Duals, no cats, Flowmaster 40s, Richmond 3.73s w/ Trac-Lok, maxed out Baumann shift kit, 3000 RPM Dirty Dog non-lock TC
Aside from the Mustang crinkle headers, still looks like it's only 150 HP...
1988 Black XR7 Trick Flow top end, Tremec 3550
1988 Black XR7 Procharger P600B intercooled, Edelbrock Performer non-RPM heads, GT40 intake AOD, 13 PSI @5000 RPM. 93 octane

magnum 500 wheels

Reply #6
Okay curiosity got the better of me.....N!!!!!! Grabbd em off a pic of a Boss 302. Screw slots I want these!!!!!!!
1987 20th Anniversary Cougar, 302 "5.0" GT-40 heads (F3ZE '93 Cobra) and TMoss Ported H.O. intake, H.O. camshaft
2.5" Duals, no cats, Flowmaster 40s, Richmond 3.73s w/ Trac-Lok, maxed out Baumann shift kit, 3000 RPM Dirty Dog non-lock TC
Aside from the Mustang crinkle headers, still looks like it's only 150 HP...
1988 Black XR7 Trick Flow top end, Tremec 3550
1988 Black XR7 Procharger P600B intercooled, Edelbrock Performer non-RPM heads, GT40 intake AOD, 13 PSI @5000 RPM. 93 octane

magnum 500 wheels

Reply #7
Yeah, the Magnums look much better than the slots...

magnum 500 wheels

Reply #8
The Ford Magnums look really good,the slots.....well,if it was a 75 Torino maybe.You would want Ford Magnums,they were wider than the Mopar Magnums by an inch.Same bolt pattern though.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

magnum 500 wheels

Reply #9
I have to go with the slots.I really like the looks of them on that cougar.:D
Never drive faster than your guardian angel can fly.
:birdsmily: :birdsmily: :birdsmily::birdsmily: 
  [SIGPIC][/SIGPIC]
:birdsmily: :birdsmily: :birdsmily::birdsmily:
1983 base model,1969 302 (originally a v6),upraded c5,currently 30,441 original miles.


magnum 500 wheels

Reply #11
Nice photoshop work.  Any possibility of doing that with the vintiques?

I'm liking the SIIICK pic myself. 
There's a debate on the HAMB about Keystone classics, but I won't go there, lol.

BTW, I thought I'd load up this pic for no reason:
1987 TC

magnum 500 wheels

Reply #12
What are "vintiques"? Badass pic btw LOL
1987 20th Anniversary Cougar, 302 "5.0" GT-40 heads (F3ZE '93 Cobra) and TMoss Ported H.O. intake, H.O. camshaft
2.5" Duals, no cats, Flowmaster 40s, Richmond 3.73s w/ Trac-Lok, maxed out Baumann shift kit, 3000 RPM Dirty Dog non-lock TC
Aside from the Mustang crinkle headers, still looks like it's only 150 HP...
1988 Black XR7 Trick Flow top end, Tremec 3550
1988 Black XR7 Procharger P600B intercooled, Edelbrock Performer non-RPM heads, GT40 intake AOD, 13 PSI @5000 RPM. 93 octane

 

magnum 500 wheels

Reply #13
the steelie w/hubcap in my previous post. similar to what the late 60's Chargers had.
1987 TC

magnum 500 wheels

Reply #14
Quote from: ZondaC12;258839
Screw slots I want these!!!!!!!

IMHO, I have to say I have not seen a set of wheels that make a 20th look any better than the stock gold trimmed set. When those wheels are like new and clean, they are drop dead gorgeous!!
1987 Turbo Coupe - Son's car
1987 Super Coupe - Son's project car
1934 Ford - My project car