Skip to main content
Topic: Emissions canister question (Read 917 times) previous topic - next topic

Emissions canister question

On an 87 thunderbird with a 5.0 does the emissions canister return line have a type of electrical plug? The other end of this plug attaches up under the intake. I'm thinking thats where this line is supposed to go. Again toward the end not connected to the intake has a sort of selonoid.

I left the line on from the 3.8l v6, and I believe that should be taken off and this line put on.

Emissions canister question

Reply #1
There should be a vent hose that runs from the fuel tank to the charcoal canister, then an evap hose that run from the canister to the intake manifold. The evap hose has an evap solenoid with an electrical connector. 3.8L and 5.0L use the same solenoid and lines. I re-used mine. You might as well keep it all connected, it keeps the car from smelling like gas fumes under the hood.
1988 Thunderbird
306 HO w/ A9P processor
AOD w/ Transgo Reprogrammer
Full Digital Dash w/ twin Cyberdyne A-pillar gauges 
245/50/16 Tires on Snowflakes
Engine swap - CA smog compliant

 

Emissions canister question

Reply #2
Quote
You might as well keep it all connected, it keeps the car from smelling like gas fumes under the hood.


+1
-- 05 Mustang GT-Whipplecharged !!
--87 5.0 Trick Flow Heads & Intake - Custom Cam - Many other goodies...3100Lbs...Low12's!