rear end ? November 16, 2008, 04:26:40 PM from looking at this pic would the teeth on my ring be worth using? Quote Selected
rear end ? Reply #1 – November 16, 2008, 04:46:49 PM What did you do to chip them off like that?I chipped the inside of my ring gear when my differential blew up & decided to use that as an excuse to get the 3.55's that I've wanted for a while (running out of gear at the track). I would get new gears if I were you - why chance it? Quote Selected
rear end ? Reply #2 – November 16, 2008, 05:02:14 PM then i will use that as an excuse to get 3.73 or 4.10 in a week or so. is the counter shaft the same for 3.45's and 3.73 or 4.10? Quote Selected
rear end ? Reply #4 – November 16, 2008, 09:08:08 PM Quote from: blackcougar71;243312 is the counter shaft the same for 3.45's and 3.73 or 4.10?Quote from: SR71TC;243349Do you mean the pinion gear?If so...no. Quote Selected
rear end ? Reply #5 – November 16, 2008, 11:20:03 PM If, on the other hand, you're talking about the cross-shaft, then I think if you stick with Ford Racing gears the same cross-shaft will work. Also, setting up the pinion depth is much easier if you're replacing OEM gears (or even other Ford Racing gears if they were properly set up) as the shim calculation becomes much easier. Quote Selected
Topic: rear end ? (Read 1382 times)
previous topic - next topic
