Quad Shocks for a 7.5"?

Topic: Quad Shocks for a 7.5"? (Read 6227 times) previous topic - next topic

Quad Shocks for a 7.5"?

Reply #15 – November 09, 2008, 10:47:59 AM

Quote from: V8Demon;242067

My guess is there's GOT be a part #'s for that little pieces.

Paul, you are correct in your guess.

Here you go:

E5SZ-4A490-A (driver side)
E5SZ-4A491-A (passenger side)

I would be very surprised if Ford still had them available so finding new ones would most likely be pretty difficult.
You will probably need to find a set off of one of the cars that Eric mentioned.

Quad Shocks for a 7.5"?

Reply #16 – November 09, 2008, 01:04:13 PM

Have I told you I love you? :hick:

Thanks!!

Quad Shocks for a 7.5"?

Reply #17 – November 10, 2008, 05:13:06 AM

i may have 2 7.5 inch rear ends with quad shock brackets on them. so templates could be made easily, i do nto have much desire for quad shocks

Quad Shocks for a 7.5"?

Reply #18 – November 11, 2008, 06:12:11 PM

Hey Lou!!! If you can make it over next Tuesday or wednesday, I'll give you the brackets for your car.......Those I know where they are.

Or any of those days till the end of the year. Call my cell phone. John

Quad Shocks for a 7.5"?

Reply #19 – April 22, 2014, 09:08:25 AM

Has anyone replaced their original quad shocks with newer shocks? I'm wondering if it would make any difference in handling or launching. I don't know how to see if mine are worn out without taking them off the car. And if I do that, I might as well replace them, right?

Quad Shocks for a 7.5"?

Reply #20 – April 22, 2014, 09:36:44 AM

For all the hassle of putting quad shocks on the car why not just install some quality uppers and lowers like the CHE units and be done with it? With a quality set up aftermarket UCA's and LCA's the quad shocks are not needed and they get in the way of things like wide tires. If you are putting a car back stock then I get it but otherwise why do it?

Darren

Quad Shocks for a 7.5"?

Reply #21 – April 22, 2014, 11:44:00 AM

I know this thread is older than dirt itself, but, with a 275/40 on an '04 bullitt wheel, there was clearance with my quad shocks on my '88 Sport. I kept the quads on the car when I swapped in the TC rear.

I don't know what size tire would interfere, but it's bigger than mine.

I don't know if there's a difference in length with the Mustang quads vs the Tbird Sport quads...perhaps a part number search on a couple of the big box part store websites would narrow it down..

I've also got the CHE rear c/a's too. Wheelhop? What's that? (probably something that those with much more power than mine had.. struggled with...)

Quad Shocks for a 7.5"?

Reply #22 – April 22, 2014, 01:36:53 PM

Didn't see it mentioned even though this is a super old thread, but my 84 TC came with a 7.5 Track Lock and quad shocks. Also bump for replacement part number.

Quad Shocks for a 7.5"?

Reply #23 – April 23, 2014, 06:45:25 AM

I think they run about $20 or so apiece. Look for axle dampers.

http://www.ebay.com/itm/New-Axle-Damper-Mustang-Quad-Shock-1988-1989-1990-1991-/301146722602?pt=Motors_Car_Truck_Parts_Accessories&fits=Model%3AMustang&hash=item461dbe512a&vxp=mtr