Skip to main content ↑ ↓
Topic: Wish me luck today....... (Read 1796 times) previous topic - next topic

Wish me luck today.......

I'm getting ready to go pull the front clip (not the hood) and swap the front fenders and doors.I dread it,but I need to do it while I have a weekend off,and get it over with.I will post pics after while.I'll get before,during,and after shots.Off I go.........................
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

Wish me luck today.......

Reply #2 –
It's not that hard. mostly awkward and a little heavy.
[SIGPIC][/SIGPIC]
***** Project "EVOLUTION" 1987 Cougar LS  & 1985 Cougar Convertible *****
[/COLOR]
5.0 HO 306 roller block, machined GT-40P heads, Wiseco dished forged pistons, Eagle forged floating I-beam connecting rods, Lunati pushrods, ARP bolts, Scorpion aluminum 1.6 rockers, Comp Cams Magnum 266HR, Explorer intake, 65mm TB, MAF Conversion, 19# injectors, Ford Racing stainless P-headers, 2-1/2" cat-less exhaust w/ Flowtech Afterburner lers , SC AOD with 2800 BDR torque converter, 3.73 T-Lok rear, CHE rear control arms, full 2-1/2" frame w/1" jacking rails & seat supports, Rear disk brakes, Turbine wheels, All original interior w/ floor shift upgrade .......
Pretty much every panel on my 87 is new, rebuilt, or re constructed. :D
Join us on Facebook
http://www.facebook.com/home.php?sk=group_137541156293768&ap=1

Wish me luck today.......

Reply #3 –
If you have trouble removing that clip all by yerself, call this guy:
1987 TC
 

Wish me luck today.......

Reply #5 –
the long arm of the law comes in handy for all the front clip bolts.  all of them can be gotten to from the bottom,, although the top inner is the tight one.

Wish me luck today.......

Reply #6 –
Boring pics coming asap.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

Wish me luck today.......

Reply #7 –
I took pics of the Sport with no doors on both sides,but I guess a few pics didn't take.Anyway,here's what I have.The door panels will go on tomorrow,and I'll adjust the hood on the driver side (and the fender).The hood is higher than the fender just a little.








These doors and fenders are in better shape than the gold ones.No dents,no rust,all is good.I'll finish the little stuff tomorrow and then go clean the interior.I have to replace the chrome window trim with the black,and when the car is painted,I'll install the new black handles and locks,along with a bunch of other new parts that are waiting on the shelf.Paint is getting really close.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

Wish me luck today.......

Reply #8 –
awesome!!
under hood is amazing on that car!
RIP 1988 and 1990 Lincoln Mark VII LSC
I welcomed the dark side and currently am driving a 2000 Dodge Durango SLT plus, with a 5.9, Code named project "Night Runner"
Shes black on black, fully loaded, with headers, 180 tstat, e fan, straight exhaust into a cherry bomb vortex ler, full tune up, ported intake and T/B, MSD coil, and round aircleaner.
Mods to come: Fully rebuilt and heavily modded 46RE, and a richmond rachet locker.
my $300 beater ;)
R.I.P Kayleigh Raposa 12/18/90 - 2/24/07

Wish me luck today.......

Reply #9 –
Thanks a lot.The under hood area will be better when I detail it the way it used to be.I have a little painting and a lot of polishing to do.All the real stuff is under the hood and the interior.No-one thinks the car can pull it's own weight......well,they find out the hard way.The car is now running stronger than ever,very solid.Thursday on my way to pick up my little man from school,a guy in a '95 Mustang GT convertible wanted to play.I was surprised how hard the Sport pulled.The Stang was left behind.He was really curious about the Sport after that.He caught me at the grocery store after I got my boy.I wouldn't show him under the hood.I kept telling him I had a 3.8.LOL.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

Wish me luck today.......

Reply #10 –
Looking good,
How many bolts are left over? LOL

That should save you a lot of body work.
I'm guessing the front panel and bumper cover wasn't usable from the other car?
[SIGPIC][/SIGPIC]
***** Project "EVOLUTION" 1987 Cougar LS  & 1985 Cougar Convertible *****
[/COLOR]
5.0 HO 306 roller block, machined GT-40P heads, Wiseco dished forged pistons, Eagle forged floating I-beam connecting rods, Lunati pushrods, ARP bolts, Scorpion aluminum 1.6 rockers, Comp Cams Magnum 266HR, Explorer intake, 65mm TB, MAF Conversion, 19# injectors, Ford Racing stainless P-headers, 2-1/2" cat-less exhaust w/ Flowtech Afterburner lers , SC AOD with 2800 BDR torque converter, 3.73 T-Lok rear, CHE rear control arms, full 2-1/2" frame w/1" jacking rails & seat supports, Rear disk brakes, Turbine wheels, All original interior w/ floor shift upgrade .......
Pretty much every panel on my 87 is new, rebuilt, or re constructed. :D
Join us on Facebook
http://www.facebook.com/home.php?sk=group_137541156293768&ap=1

Wish me luck today.......

Reply #11 –
The other car was an LX,standard bumper cover and header panel.Mine are actually in a lot better shape than they appear in the pics.I actually had zero bolts left over.Everything went right back where it belonged.I did find my core support to fender support brackets and installed them.They really stiffen the nose up a lot.You're right Daminc,changing those saved a LOT of work.I have to find some rear fender trim now.I have decided to keep it in the middle.I have to find the two pieces in front of the rear tires.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

Wish me luck today.......

Reply #12 –
Way to go Vinnie, nice work. Can't wait to see when it's done. I farmed mine out because I don't touch body work, but you'll save a lot of $$ prepping it yourself.
Matt
1984 Thunderbird - 89 302 HO, GT40 heads w/ Trick Flow springs, E303 cam, Edelbrock Performer 289 intake and 600 cfm 4bbl, Mustang headers, Jegs o/r H pipe, Dynomax lers, Mustang AOD and shifter, Mustang 8.8 w/ 3.73s, 3G alternator, Mustang front and rear sway bars, KYB SN-95 front struts and shocks, and 11" front brakes.

1988 Mustang GT - GT40 heads, Explorer intake, 70mm throttle body, 70mm MAF, Crane 1.7 rrs, E303 cam, Kirban Kwik shifter w/ Pro 5.0 deluxe handle, aluminum clutch quadrant and firewall adjuster, o/r h pipe, Dynomax lers, 3G alternator, aluminum radiator, and 3.27 gears.
 
1986 Cougar 5.0, 1989 Mark VII LSC 5 speed, 1980 Mercury Zephyr 4 door (sold)

Wish me luck today.......

Reply #13 –
Vinnie,what did you do with the header panel you got from me?
Your getting there.
Old Grey Cat to this.88 Cat, 5.0 HO, CW mounts, mass air, CI custom cam, afr165's, Tmoss worked cobra intake, BBK shorty's,off road h pipe, magnaflow ex. T-5,spec stage 2 clutch, 8.8 373 TC trac loc, che ajustables with bullits on the rear. 11" brakes up front. +

Wish me luck today.......

Reply #14 –
When blue header panel got here,the corners were broke off,so about two days later I found this one at a local boneyard for super cheap.I also got the hood for around $30.00 as well.I'm going out to do a little more work today.I have all day,but I want to spend a little time doing nothing before work tomorrow.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..