Skip to main content ↑ ↓
Topic: Vinne A++ for getting the wiring looks very clean (Read 1471 times) previous topic - next topic

Vinne A++ for getting the wiring looks very clean

Thanks for the help need a few more parts if anyone can get a hold of them?

87-88 cougar header panel and bumper and headlights :note for the T-Bird

May need 88 cougar headlight wiring not sure yet have to take the wiring to the shop for the XR7 and see.



You said you got the money order a week ago and i still have not got anything. Since this one liner kinda makes me sound like a jerk if you sent a lens cover in the box i will give you a little extra cash next time around.
[SIGPIC][/SIGPIC]


http://www.cardomain.com/id/Carpimp1987
1987 T-Bird AEROBIRD-GT had many many mods but is now totaled and is the car that made me want to start customizing everything all over again.
1988 T-Bird 5.0 HO DD/Sleeper/next project car :birdsmily:
1988 Cougar XR7 5.0 HO Vortech Supercharged being bulit right now :cougarsmily:

Vinne A++ for getting the wiring looks very clean

Reply #1 –
Wow.....

A PM would have worked.......Besides the USPS is the way he ships so being patient would be helpful too.

Nice call out.  :rolleyes:
-- 05 Mustang GT-Whipplecharged !!
--87 5.0 Trick Flow Heads & Intake - Custom Cam - Many other goodies...3100Lbs...Low12's!

Vinne A++ for getting the wiring looks very clean

Reply #2 –
A Week? You're complaining after a week?!?!?

You shouldn't be buying things through the mail if you think you should have something a week after paying...
2015 Mustang GT Premium - 5.0, 6-speed, Guard Green - too much awesome for one car

1988 5.0 Thunderbird :birdsmily: SOLD SEPT 11 2010: TC front clip/hood ♣ Body & paint completed Oct 2007 ♣ 3.55 TC rear end and front brakes ♣ TC interior ♣ CHE rear control arms (adjustable lowers) ♣ 2001 Bullitt springs ♣ Energy suspension poly busings ♣ Kenne Brown subframe connectors ♣ CWE engine mounts ♣ Thundercat sequential turn signals ♣ Explorer overhead console (temp/compass display) ♣ 2.25" off-road dual exhaust ♣ T-5 transmission swap completed Jan 2009 ♣

Vinne A++ for getting the wiring looks very clean

Reply #3 –
Quote from: Carpimp1987;235463
You said you got the money order a week ago and i still have not got anything.


id give 3 weeks before i even started to wonder.

we sell and buy things in our spare time,, atleast i think thats how it works. 
I got a box today and it occured to me that someone out there might blast the shipper for the container condition....like its the shippers fault.

Chill, a week is a week and if he just got around to making the deposit or just got around to getting things in a box, then so be it.  Did you pay for expidited shipping?  if not, your at the mercy of snail mail.

Vinne A++ for getting the wiring looks very clean

Reply #4 –
Well its like a week and half and he did not respond to my simple PM. Yes i know Labor day was a day off for the mail also which did not help I just wanted a idea of when it got sent in the mail and last of all this is not Negative feedback.
[SIGPIC][/SIGPIC]


http://www.cardomain.com/id/Carpimp1987
1987 T-Bird AEROBIRD-GT had many many mods but is now totaled and is the car that made me want to start customizing everything all over again.
1988 T-Bird 5.0 HO DD/Sleeper/next project car :birdsmily:
1988 Cougar XR7 5.0 HO Vortech Supercharged being bulit right now :cougarsmily:

Vinne A++ for getting the wiring looks very clean

Reply #5 –
Give him a break, he sends out a lot of stuff in a weeks time.
plus he hasn't been on much this week for some reason.
[SIGPIC][/SIGPIC]
***** Project "EVOLUTION" 1987 Cougar LS  & 1985 Cougar Convertible *****
[/COLOR]
5.0 HO 306 roller block, machined GT-40P heads, Wiseco dished forged pistons, Eagle forged floating I-beam connecting rods, Lunati pushrods, ARP bolts, Scorpion aluminum 1.6 rockers, Comp Cams Magnum 266HR, Explorer intake, 65mm TB, MAF Conversion, 19# injectors, Ford Racing stainless P-headers, 2-1/2" cat-less exhaust w/ Flowtech Afterburner lers , SC AOD with 2800 BDR torque converter, 3.73 T-Lok rear, CHE rear control arms, full 2-1/2" frame w/1" jacking rails & seat supports, Rear disk brakes, Turbine wheels, All original interior w/ floor shift upgrade .......
Pretty much every panel on my 87 is new, rebuilt, or re constructed. :D
Join us on Facebook
http://www.facebook.com/home.php?sk=group_137541156293768&ap=1

Vinne A++ for getting the wiring looks very clean

Reply #6 –
Vinnie is one of the LAST people you need to worry about getting stuff to you.  Chill.

I know it's holding up a project, but you also could have gotten the wiring you needed long before it came to the point of needing it.
Long live the 4-eyes!  - '83 Tbird Turbo - '85 Marquis LTS - '86 LTD Wagon-  '81 Granada GL 2dr

Vinne A++ for getting the wiring looks very clean

Reply #7 –
Chuck W your right i am not worried i just wanted a idea of when it got sent out and after post this i made myself look like a @$$.
 
If you got a few SFC's or are going to make somemore anytime soon let me know i would be in no hurry for them they would be nice for both cars or at least the XR7 if you had just 1 set laying around.

Also i am sure vinne is more busy than me and its just weird not seeing him on here much. With my long week and stupid car wreck and looking for a better job and getting back with my ex girlfriend and trying to clean up my stuff to move out soon i am sorry i even asked where my stuff is at because Vinne is great at Custmer service and sends out more stuff than i think anyone else on this Forum.
[SIGPIC][/SIGPIC]


http://www.cardomain.com/id/Carpimp1987
1987 T-Bird AEROBIRD-GT had many many mods but is now totaled and is the car that made me want to start customizing everything all over again.
1988 T-Bird 5.0 HO DD/Sleeper/next project car :birdsmily:
1988 Cougar XR7 5.0 HO Vortech Supercharged being bulit right now :cougarsmily:

Vinne A++ for getting the wiring looks very clean

Reply #8 –
Hey,my computer has been down for a few days.I haven't been around at all.AT&T came and fixed me up today.I had to go to the library to use their computer when I could.The harness was shipped and should be there any time.I didn't have the lens you need,sorry.I also have been busy.Last week I had to pull the head and have a valve replaced,swap the steering rack,and,life in general.Anyway,the harness was shipped UPS.Take a chill pill and relax.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

Vinne A++ for getting the wiring looks very clean

Reply #9 –
I was starting to think you found a better forum.
Then I thought na, there isn't anyplace better
[SIGPIC][/SIGPIC]
***** Project "EVOLUTION" 1987 Cougar LS  & 1985 Cougar Convertible *****
[/COLOR]
5.0 HO 306 roller block, machined GT-40P heads, Wiseco dished forged pistons, Eagle forged floating I-beam connecting rods, Lunati pushrods, ARP bolts, Scorpion aluminum 1.6 rockers, Comp Cams Magnum 266HR, Explorer intake, 65mm TB, MAF Conversion, 19# injectors, Ford Racing stainless P-headers, 2-1/2" cat-less exhaust w/ Flowtech Afterburner lers , SC AOD with 2800 BDR torque converter, 3.73 T-Lok rear, CHE rear control arms, full 2-1/2" frame w/1" jacking rails & seat supports, Rear disk brakes, Turbine wheels, All original interior w/ floor shift upgrade .......
Pretty much every panel on my 87 is new, rebuilt, or re constructed. :D
Join us on Facebook
http://www.facebook.com/home.php?sk=group_137541156293768&ap=1

Vinne A++ for getting the wiring looks very clean

Reply #10 –
I was starting to worry,started looking for your phone #.
Now we got to put up with you again!!
Old Grey Cat to this.88 Cat, 5.0 HO, CW mounts, mass air, CI custom cam, afr165's, Tmoss worked cobra intake, BBK shorty's,off road h pipe, magnaflow ex. T-5,spec stage 2 clutch, 8.8 373 TC trac loc, che ajustables with bullits on the rear. 11" brakes up front. +

Vinne A++ for getting the wiring looks very clean

Reply #11 –
Quote from: daminc;235709
I was starting to think you found a better forum.
Then I thought na, there isn't anyplace better


You are correct.No better place to be.I go to the Corral and Stangnet on occasion,but they just don't "work" good together like this place.Home sweet home.LOL.We had a big problem after an electrical surge and AT&T had to come repair some outside lines.We're back in business.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

Vinne A++ for getting the wiring looks very clean

Reply #12 –
Thanks Vinne  that sucks about your internet. Sorry for being a PITA also do you got a header panel and front bumper cover?
[SIGPIC][/SIGPIC]


http://www.cardomain.com/id/Carpimp1987
1987 T-Bird AEROBIRD-GT had many many mods but is now totaled and is the car that made me want to start customizing everything all over again.
1988 T-Bird 5.0 HO DD/Sleeper/next project car :birdsmily:
1988 Cougar XR7 5.0 HO Vortech Supercharged being bulit right now :cougarsmily:

Vinne A++ for getting the wiring looks very clean

Reply #13 –
Nope,no header panel or bumpers.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

Vinne A++ for getting the wiring looks very clean

Reply #14 –
Quote from: Carpimp1987;235722
do you got a header panel and front bumper cover?

if nobody else does, I have the header and grille...you're looking for Base/LX stuff, right?

(it's what I have for sale..)
here's a pic:


This was the way my car used to look, I painted the grill white, so if you'd rather have the shiny shiznit, you'd probably want a different one.
Your call Holmes. :D
'98 Explorer 5.0
'20 Malibu (I know, Chevy, but, 35MPG. Let's go brandon, eh)