Skip to main content ↑ ↓
Topic: 5.0 Accessory Brackets (Read 1309 times) previous topic - next topic

5.0 Accessory Brackets

I think I remember reading where someone claimed that T-Bird/Cougar 5.0 accessory brackets are different than the accessory brackets on Mustangs.  Is that true?  It seems kind of hard to believe.

Vic
William

5.0 Accessory Brackets

Reply #1 –
It is true. I don't have any pictures off hand since I don't have my mustang anymore.
It's Gumby's fault.

5.0 Accessory Brackets

Reply #2 –
Hey thanks for the info on that.
William

5.0 Accessory Brackets

Reply #3 –
The alternator bracket is the same,the a/c bracket is different.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

5.0 Accessory Brackets

Reply #4 –
I'm not 100% sure, but I believe the '86 Stang used the same A/C, P/S bracket as the Bird/Coug...

At least the shorter belt I used on mine with the under drive pulleys, fit the Bird perfectly when I inst the same pulleys on it...

5.0 Accessory Brackets

Reply #5 –
I'm surprised Ford used different brackets on two cars that share the same chassis.  The Mustang brackets hold the accessories closer to the engine I've been told.  That's just weird that they would do that.
William

5.0 Accessory Brackets

Reply #6 –
Quote from: Blue Thunder;232368
I'm surprised Ford used different brackets on two cars that share the same chassis.  The Mustang brackets hold the accessories closer to the engine I've been told.  That's just weird that they would do that.


Actually should be the opposite, P/S pump is closer to the battery on the Stang...
 

5.0 Accessory Brackets

Reply #7 –
I've got ya.
William

5.0 Accessory Brackets

Reply #8 –
I can verify an 86 T-bird not only has different A/C & P/S brackets than a Mustang, but the A/C compressor and A/C Line to the compressor are different too.  The compressor is about 3/4 of an inch shorter on a Mustang.  T-bird compressor won't work w/a Mustang bracket.  The A/C line on the T-bird goes across the front of the car under the radiator.  On a Mustang it goes across the top of the engine.

The bracket thing is really not important, either work fine (provided you have complete sets).  The only  hassle I found was trying to install an ATI ProCharger.  All the Mustang stuff must be used.

5.0 Accessory Brackets

Reply #9 –
im glad you guys had this discussion before i cleaned
up a bunch of mustang brackets. i did not realize this.
must be one reason im here a lot.[other than the great wit
and humor]--irv

5.0 Accessory Brackets

Reply #10 –
irv, you should be ok with those mustang brackets assuming you're getting some new accessories.  I'm running all mustang brackets with a mustang a/c compressor and power steering pump.
1988 Thunderbird Turbo Coupe
'89 5.0 w/ ported intakes, Mallory Adjustable FPR, BBK shorties and H with 2.5" Flows, 130 amp 3G, 89 Mustang comp/wiring, Aluminum radiator w/ elec fan, T5 trans, King Cobra clutch, 3.55 gears, 13" Cobra brakes (front), Wilwood prop valve, Mustang A-arms, Front Coil-overs, MM CC plates, Silver 17x9 R's, 03 Cobra IRS, Aluminum DS, 2002 Mustang dash/console etc..., custom leather seats

5.0 Accessory Brackets

Reply #11 –
I was taught that the Mustang a/c bracket is different so it would lower the a/c compressor for hood clearance due to a lower hood line.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..