Skip to main content ↑ ↓
Topic: A few pics of the pedal swap.... (Read 2077 times) previous topic - next topic

A few pics of the pedal swap....

Here they are.Nothing fancy,but still one step closer.

The beginning.....


pedal assembly


tearing it all apart


The pile that has to come out so pedals can go in...


Hole in the firewall (note the BBK's...)


One step closer to the 5 speed....
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

A few pics of the pedal swap....

Reply #1 –
WOW, that looks AWESOME....  (note the sarcasm.....  )  where the hell are the pics?!?!?

A few pics of the pedal swap....

Reply #2 –
Give Me 5 Minutes !!!!!
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

A few pics of the pedal swap....

Reply #3 –
Alright....NOW you can see them.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

A few pics of the pedal swap....

Reply #4 –
Sweet.  Those BBKs are pimp.
88 TC, Lots of Mods.

 

A few pics of the pedal swap....

Reply #5 –
V-man, A little here & there will make it worth while seeing your "Sport" at CJ 09 next summer keep up the great work dude. :headbang: :poke:

A few pics of the pedal swap....

Reply #6 –
Thanks a lot.I'm trying to do quality work.Oh,and about the BBK's being pimp............you're right.LOL.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

A few pics of the pedal swap....

Reply #7 –
What his car wasn't worth seeing at c-jam 09 without extra mods LOL jk.
Vin, you got forged flat tops???????
Aren't they the stock SO pistons???????,SO pistons weren't forged,if there not stock my bad,just curious is all.

A few pics of the pedal swap....

Reply #8 –
The engine was originally from an '87 Mark VII.Forged flat tops.The engine has been great.I'm having a little low end power issue,but,I think it's the E303 cam and other mods including a shift kit in the tranny,but a stock converter.Once the 5 speed is in,the manners of the car will probably change a little.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

A few pics of the pedal swap....

Reply #9 –
Yea that makes more sense.
However the stock HO pistons look like flat tops but have very small eyebrows in them,i thought the same when i took the heads off the HO.
The stock 1600 stall convertor will give you a low end loss for sure,i think the e-cam states 2400+ stall to work correctly.
The 5-speed will make all the difference.

A few pics of the pedal swap....

Reply #10 –
Quote from: dominator;228978
Yea that makes more sense.
However the stock HO pistons look like flat tops but have very small eyebrows in them,i thought the same when i took the heads off the HO.
The stock 1600 stall convertor will give you a low end loss for sure,i think the e-cam states 2400+ stall to work correctly.
The 5-speed will make all the difference.

The 2400 stall is a big improvement,with E-303.I had 2000 +2400-2600 non lock before the t-5 swap.Now with my 3.73's 1st + 2nd is almost worthless to me.Either just burn the tires or the rpm limiter smacks me.But I guess thats a good thing.
Old Grey Cat to this.88 Cat, 5.0 HO, CW mounts, mass air, CI custom cam, afr165's, Tmoss worked cobra intake, BBK shorty's,off road h pipe, magnaflow ex. T-5,spec stage 2 clutch, 8.8 373 TC trac loc, che ajustables with bullits on the rear. 11" brakes up front. +

A few pics of the pedal swap....

Reply #11 –
its funny that everyone says the E cam has no bottom end....  mine effs off pretty good from a stop....  Chris I will have to take you for a rip at the car show one of these nights and show you...  or maybe make a video of me hammering it from a stop...  yeah you can feel it come into its power band as it revs, but there is still lots of bottom end to it...  in mine anyways, even with the stock tranny and gears...

A few pics of the pedal swap....

Reply #12 –
I can get the car to bark the tires in second and third,but it's still shifts too fast at lower rpms.I can't wait to sell the AOD and get the 5 speed in.It should be in on the 2nd.I'll have pics of it.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

A few pics of the pedal swap....

Reply #13 –
awesome work!!
Cant wait to get the stuff and do my mark up with a 5 speed
RIP 1988 and 1990 Lincoln Mark VII LSC
I welcomed the dark side and currently am driving a 2000 Dodge Durango SLT plus, with a 5.9, Code named project "Night Runner"
Shes black on black, fully loaded, with headers, 180 tstat, e fan, straight exhaust into a cherry bomb vortex ler, full tune up, ported intake and T/B, MSD coil, and round aircleaner.
Mods to come: Fully rebuilt and heavily modded 46RE, and a richmond rachet locker.
my $300 beater ;)
R.I.P Kayleigh Raposa 12/18/90 - 2/24/07

A few pics of the pedal swap....

Reply #14 –
Get on it.I just bought a piece at a time until I had all the pieces.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..