Skip to main content ↑ ↓
Topic: long tube Headers (Read 2642 times) previous topic - next topic

long tube Headers

hey guys,
does anyone know if mustang long tube headerswill fit on a 87 cougar xr7.

Re: long tube Headers

Reply #1 –
Heddman actually makes long tube headers for the 83-88 Tbird/Cougar 5.0. :D
95 Ranger Splash 2.3
88 Tbird Sport :ies::ies:
5.0 SO, stainless shorty headers, w/ Magnaflow lers. KYB struts, KYB shocks. 5lug conversion from sn95 Mustang, subframe connectors, drilled and slotted rotors, 03 Mach 1 wheels. sequential taillights.140 speedo

Re: long tube Headers

Reply #2 –
here you go
Quote
there's only about a half a dozen man made objects that are herd by the human ear below 40Hz,a pipe organ,thunder,the space shuttle lifting off,a jet airplane taking off or landing,a large canon,an atomic bomb ignited in your back yard and the heat wave afterward oh wait you would be dead so you would'nt hear it scratch that!,and maybe beating your hear against a wall less then 40 times a second..rap music is'nt one of them!thats 40-60Hz@100+db the moving air is under 40Hz

Re: long tube Headers

Reply #3 –
but you need to put a mini starter if you ever plan to get the starter back out when you need to
Quote
there's only about a half a dozen man made objects that are herd by the human ear below 40Hz,a pipe organ,thunder,the space shuttle lifting off,a jet airplane taking off or landing,a large canon,an atomic bomb ignited in your back yard and the heat wave afterward oh wait you would be dead so you would'nt hear it scratch that!,and maybe beating your hear against a wall less then 40 times a second..rap music is'nt one of them!thats 40-60Hz@100+db the moving air is under 40Hz

Re: long tube Headers

Reply #4 –
stupid california smog.... :mad:

Re: long tube Headers

Reply #5 –
i got mac's and they fit like a dream actualy. i was surprised because everyone says what a bitch it is to install LT's

Re: long tube Headers

Reply #6 –
which headers are those Blown? and X-Pipe? tanks.
2005 Subaru WRX STi|daily driver

Re: long tube Headers

Reply #7 –
have to watch out that the long tubes u get do fit right,
The BBK longs will not clear if u have a AOD.

Re: long tube Headers

Reply #8 –
Is that oil all over the underside of your car?

Re: long tube Headers

Reply #9 –
Quote from: darkthunder
which headers are those Blown? and X-Pipe? tanks.


cheapo flow junk headers "flow tech" 

the X pipe is custom made the X section is 3"


Quote from: lowcat
Is that oil all over the underside of your car?


yep well it's tranny fluid from my old T5 it used to leak from the tail shaft before it :barf:
no more oil leaks .. those pictures where taken in September of 2003

the only thing that leaks these days are those junk headers from all the slip s they have :disappoin
Quote
there's only about a half a dozen man made objects that are herd by the human ear below 40Hz,a pipe organ,thunder,the space shuttle lifting off,a jet airplane taking off or landing,a large canon,an atomic bomb ignited in your back yard and the heat wave afterward oh wait you would be dead so you would'nt hear it scratch that!,and maybe beating your hear against a wall less then 40 times a second..rap music is'nt one of them!thats 40-60Hz@100+db the moving air is under 40Hz

Re: long tube Headers

Reply #10 –
doh. guess i'll buy some MAC longtubes then. Flowtechs were on my list. tanks for the info.
2005 Subaru WRX STi|daily driver

Re: long tube Headers

Reply #11 –
lol the only reason i bought them was because they where only $110.00 VS everyone elses 250+.. i'd say they are ok for what i payed for them and will have to buy another set unless i want to revamp my whole exhaust system again..  but they are just a pain in the BA!!S to install and they use slip s for most of the tubes but thats because the headers are equal length long tubes :shakehead


Nick
Quote
there's only about a half a dozen man made objects that are herd by the human ear below 40Hz,a pipe organ,thunder,the space shuttle lifting off,a jet airplane taking off or landing,a large canon,an atomic bomb ignited in your back yard and the heat wave afterward oh wait you would be dead so you would'nt hear it scratch that!,and maybe beating your hear against a wall less then 40 times a second..rap music is'nt one of them!thats 40-60Hz@100+db the moving air is under 40Hz

Re: long tube Headers

Reply #12 –
I had bought a set of Flowtech unequal length shorties and they were junk. You couldn't even get the header bolts through some of the holes due to the way the tubes were bent, they blocked the holes.
I did really like the Heddman Headers I bought after I returned the Flowtechs.

Any 351 owners with long tubes? Was curious about fitment with those. :dunno:
Resident "Idiot".

Formerly TBob5pt0 :shoothead


Quote from: JeremyB;165772
Repairing a lock cylinder that is frozen or sans keys requires a drill, gumption, and a midget on a tricycle.
Quote from: Big_D
Forgot to put on intake hose when starting the car, sucked neighbors cat into intake.

Re: long tube Headers

Reply #13 –
Quote from: Warbird9
Any 351 owners with long tubes? Was curious about fitment with those. :dunno:


I have yet to found a set that fit right.
I wanted the BBK longs for my car i had to settle for Mac 351W shorties into a fox

Re: long tube Headers

Reply #14 –
i know mercoug302 had BBK's, but he had to clearance one of the primaries for the steering shaft a few times
It's Gumby's fault.