explorer intake set up Reply #15 – July 03, 2008, 01:44:15 PM ill do 240 shipped if you want it Quote Selected
explorer intake set up Reply #16 – July 03, 2008, 05:28:51 PM I sold one on Ebay a couple of months back for $142. That was Upper and lower only and nothing else. I sold the TB for $30 and the elbow for $20. So $200 is correct and fair. I cleaned mine up with some parts washer solvent, rinsed it with the hose, blown it off with compress air and let it dry. Went to the dollar store and bought some metallic paint and it turned out like this:James Quote Selected
explorer intake set up Reply #17 – July 05, 2008, 05:08:32 PM thanksfinal offer before I keep the thing220 SHIPPEDupper, lower and stock HO TB(elbow too if you want it). Unless you really want the explorer one i will pull it back off my car and include it. Only if it is a deal breaker Quote Selected
explorer intake set up Reply #18 – July 05, 2008, 07:22:14 PM Haven't you installed an Explorer intake on the Mark VII yet? Quote Selected
explorer intake set up Reply #19 – July 05, 2008, 07:27:45 PM nopeim saving one eventually for my 306 stroker build, but im not pulling the HO intake for one, dont have the time to mod the motor right now. Need to get it driving before that happens. all mods go on new motor. Quote Selected
explorer intake set up Reply #20 – July 05, 2008, 09:06:43 PM never heard of a 306 stroker. Quote Selected
explorer intake set up Reply #21 – July 05, 2008, 10:29:36 PM http://store.summitracing.com/partdetail.asp?part=SUM%2DCSUM306KIT&FROM=MGok so i said stroker when its just larger pistons not an increased stroke from a different crank.what would I call it instead so I dont make that mistake again? Quote Selected
Topic: explorer intake set up (Read 1174 times)
previous topic - next topic
