Skip to main content ↑ ↓
Topic: Custom Grille (Updated 1-6-09) (Read 5621 times) previous topic - next topic

Custom Grille (Updated 1-6-09)

Reply #30 –
Check out the ones I made.

When I had an 86. It had a billet grille
http://i158.photobucket.com/albums/t97/biggrgivens/86%20TC/tcfront.jpg

This one I made for my sons 87 to accomodate a 86 TC FMS FMIC
http://i158.photobucket.com/albums/t97/biggrgivens/Ryans%20TC/frontheaderpanel.jpg
Motorsport FMIC, Boport 1.5, Boblee header, gutted upper, profiled lower, phenolic spacer, Accufab fpr, LA3, Boport stage 3 big valve head, 57 trim/stage III Perfromance Techniques custom turbo, stinger 3" DP and custom 3"exhaust, AEM wideband, custom aluminum carnk pulley, Merkur custom A/C setup, PA performance high output 3G alt, dual oil catcj cans, Motorsport Valve cover,full Motorcraft tune up kit, 22psi of LOCO!!

Custom Grille (Updated 1-6-09)

Reply #31 –
More progress



Custom Grille (Updated 1-6-09)

Reply #32 –
Nice !!! Will it have a provision for the "Thunderbird" on it or in it somewhere?
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

Custom Grille (Updated 1-6-09)

Reply #33 –
One could be added quite easy I am sure.

more sanding and some primer

Reply #34 –




Custom Grille (Updated 1-6-09)

Reply #35 –
Lookin' good! I kinda wish I made a custom grille for my car sometimes.

Custom Grille (Updated 1-6-09)

Reply #36 –
Cool.....

Hows it going to attach?  Mold it on, Im guessing?

Custom Grille (Updated 1-6-09)

Reply #37 –
There will be two options. One will bolt on and the other will be a mold on which will be cheaper

Custom Grille (Updated 1-6-09)

Reply #38 –
I like the "mold on" idea,but,on the leading edge of the car,anything can happen and it may be easier to swap it out if it's a bolt on.Buuuut,a mold on grill is a lot smoother.It would have that "molded on" look. LOL !!!
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..
 

Custom Grille (Updated 1-6-09)

Reply #39 –
True the front does take some abuse with rock chips, bugs and what not. After 5 years mine has a few rock chips and I will probably repaint it soon. And my headlight buckets too.

Custom Grille (Updated 1-6-09)

Reply #40 –
Quote from: andrew beedle;247831





~Project ThunderStorm = '84 Charcoal Thunderbird - First Car - Long Time Work in Progress~
~Project (No Name Yet) = 1970 Plymouth GTX/RR "Clone"~

Custom Grille (Updated 1-6-09)

Reply #41 –
Well here its is ready for paint. It looks almost the same as the other pictures but it now has 3 layers of high build urethane primer which I block sanded down to 600 grit for some paint. Smooth and straight :D

Custom Grille (Updated 1-6-09)

Reply #42 –
Great looking grille.Make a few and sell them,and make a few more for the guys with an '87/'88 grille.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..