Skip to main content ↑ ↓
Topic: heads (power?) (Read 2502 times) previous topic - next topic

heads (power?)

Morning guys,
  question is,,,what kind of power increase could i see with a set of AFR 165's.
might have a chance to get a good used set for a good price. mods are in my sig.
Thanks
88 sport,TW heads, comp xe270hr, cobra u/Tmoss ported lower, 65 mm throttle body, under drives,smog delete,
1.7 roller rockers, cai, k&n, bbk adj regulator, 76mm Pro-m,all MSD ign. MSD dist,18° base timing, 3g alt.1 5/8 ceramic headers, 255lph walbro, 2.5" h-pipe, flowmasters, silverfox valvebody, 3.73 gear,
http://i216.photobucket.com/albums/cc154/flipnbird/DSCF0185.jpg ( RIP : ( )

heads (power?)

Reply #1 –
I'm guessing about 30-40 hp.I have them on mine,big difference from the E-7's.they would like a little better cam though.
Old Grey Cat to this.88 Cat, 5.0 HO, CW mounts, mass air, CI custom cam, afr165's, Tmoss worked cobra intake, BBK shorty's,off road h pipe, magnaflow ex. T-5,spec stage 2 clutch, 8.8 373 TC trac loc, che ajustables with bullits on the rear. 11" brakes up front. +

heads (power?)

Reply #2 –
I think they would make alot more than that.

Take a stock HO and run it at the track in one of our cars. Now slap on AFR 165/trickflow/edelbrock heads, tfs-1 cam, cobra intake and than run it.

I think you could drop a whole second in the 1/4
[SIGPIC][/SIGPIC]

heads (power?)

Reply #3 –
If you have stock E7s at least 40 HP --- with a better cam, more likely 50-60...

I don't care if you guys do have a woody on for the E7s vs E6s, they both suck...

EDIT... LOL I see Bob is thinkin' like me...

My figures are through a full exhaust system, running open headers would net another 20Hp... But not many street guys can do so...
 

heads (power?)

Reply #4 –
That's also if you don't mind revving to the moon...AFR's run real nice above 5000...throw some 4.30's and a convertor behind it...or just go 5-speed....if you plan on letting your AOD tell you when to shift(at 4700) then buying any set of heads would be a pretty big waste.

...and there's my :2c:

-Don
Project 3G: Grandpa Grocery Getter-'85 Crown Vic LTD 2-door, 351W with heavily ported/polished GT40 heads, heavily ported/polished Typhoon Power Plus upper & lower intake, Comp Cams 265DEH retarded 1*, FAST EZ-EFI, HD T5, 8.8" 3.73 trac lock with extra clutches, 3G alt. swap, '99 CVPI front brakes, '09 CVPI rear disc brakes, '00 CVPI booster&m/c + wilwood adj prop valve.

Parted & Gone-'88 T-bird Sport, 351W swap, ported GT40 heads

heads (power?)

Reply #5 –
Quote
if you plan on letting your AOD tell you when to shift(at 4700) then buying any set of heads would be a pretty big waste.


That's funny....mine shifts @ 6000 :rolleyes:

It's easy to get an AOD to shift higher you know...
-- 05 Mustang GT-Whipplecharged !!
--87 5.0 Trick Flow Heads & Intake - Custom Cam - Many other goodies...3100Lbs...Low12's!

heads (power?)

Reply #6 –
It's NOT necessary to rev the AFR 165s to the moon... I believe IF you bother to check they(and the other aftermarket street heads), give a significant increase in hp from approx 2200 RPMs up...

heads (power?)

Reply #7 –
Quote from: TurboCoupe50;216520
It's NOT necessary to rev the AFR 165s to the moon... I believe IF you bother to check they(and the other aftermarket street heads), give a significant increase in hp from approx 2200 RPMs up...

I have to agree with that,there not 225's where the rpm's would make alot more.Like I said,I run 165's there a good head,good power through the whole rpm range.You may want to change cams if your going that route.Also you may be heading into bigger injector range,other guys here may argue that though.
Old Grey Cat to this.88 Cat, 5.0 HO, CW mounts, mass air, CI custom cam, afr165's, Tmoss worked cobra intake, BBK shorty's,off road h pipe, magnaflow ex. T-5,spec stage 2 clutch, 8.8 373 TC trac loc, che ajustables with bullits on the rear. 11" brakes up front. +

heads (power?)

Reply #8 –
You might want to check the springs on them to,the older heads were not that good if they weren't updated.what cc are they and what rocker style do they take?
Old Grey Cat to this.88 Cat, 5.0 HO, CW mounts, mass air, CI custom cam, afr165's, Tmoss worked cobra intake, BBK shorty's,off road h pipe, magnaflow ex. T-5,spec stage 2 clutch, 8.8 373 TC trac loc, che ajustables with bullits on the rear. 11" brakes up front. +

heads (power?)

Reply #9 –
I'm thinking he told me 61cc??(would that be good) and they are pedestal mount. they only have like 6000 miles on them. also,,would i have any ptv clearance issues?

 thanks for all replys
88 sport,TW heads, comp xe270hr, cobra u/Tmoss ported lower, 65 mm throttle body, under drives,smog delete,
1.7 roller rockers, cai, k&n, bbk adj regulator, 76mm Pro-m,all MSD ign. MSD dist,18° base timing, 3g alt.1 5/8 ceramic headers, 255lph walbro, 2.5" h-pipe, flowmasters, silverfox valvebody, 3.73 gear,
http://i216.photobucket.com/albums/cc154/flipnbird/DSCF0185.jpg ( RIP : ( )

heads (power?)

Reply #10 –
Quote from: flipnbird;216613
I'm thinking he told me 61cc??(would that be good) and they are pedestal mount. they only have like 6000 miles on them. also,,would i have any ptv clearance issues?

 thanks for all replys


Are these going on your stock 88 tbird shortblock? What cam and intake are you going to run?
[SIGPIC][/SIGPIC]

heads (power?)

Reply #11 –
stock 88 block, all other mods are below
88 sport,TW heads, comp xe270hr, cobra u/Tmoss ported lower, 65 mm throttle body, under drives,smog delete,
1.7 roller rockers, cai, k&n, bbk adj regulator, 76mm Pro-m,all MSD ign. MSD dist,18° base timing, 3g alt.1 5/8 ceramic headers, 255lph walbro, 2.5" h-pipe, flowmasters, silverfox valvebody, 3.73 gear,
http://i216.photobucket.com/albums/cc154/flipnbird/DSCF0185.jpg ( RIP : ( )

heads (power?)

Reply #12 –
What magazine was it that put on a set of AFR185s on a Cobra engine and added 60hp?  They did move the cam to add more top end power.

If you have an HO, you're probably down 30hp from the Cobra because of the heads.  Go to the 165s and add probably 60-70hp, I'd say.  Maybe more.

heads (power?)

Reply #13 –
Quote from: flipnbird;216619
stock 88 block, all other mods are below


Those heads have a 1.94 intake valve don't they? If so they'll smashey-smashey with the stock T-bird flat top pistons.
88 Thunderbird LX: 306, Edelbrock Performer heads, Comp 266HR cam, Edelbrock Performer RPM intake, bunch of other stuff.

heads (power?)

Reply #14 –
Do you think they will still hit if i went to 1.6 rollers? if so i guess i won't be getting them. just looking for a good out the box style head to give me a little more ooomph for a strickly street driven car while keeping good low end grunt

Thanks for replys, Joe
88 sport,TW heads, comp xe270hr, cobra u/Tmoss ported lower, 65 mm throttle body, under drives,smog delete,
1.7 roller rockers, cai, k&n, bbk adj regulator, 76mm Pro-m,all MSD ign. MSD dist,18° base timing, 3g alt.1 5/8 ceramic headers, 255lph walbro, 2.5" h-pipe, flowmasters, silverfox valvebody, 3.73 gear,
http://i216.photobucket.com/albums/cc154/flipnbird/DSCF0185.jpg ( RIP : ( )