no headlights? April 21, 2008, 10:04:40 PM well now, i got the thing driveable but now it doesnt wanna turn its headlights on..all the rest of the lights are in proper working order. no headlights. both new bulbs just no light.makin me mad actually... i wanted to take her for a spin but....... its dark and i dont feel like getting a ticket.87 5.0 Quote Selected
no headlights? Reply #1 – April 21, 2008, 11:59:43 PM try pulling back the brights switch, or flash to pass thingy. Check your headlight switch... Quote Selected
no headlights? Reply #2 – April 22, 2008, 12:44:56 AM Does this car have the autodim and/or autolamp setup? Quote Selected
no headlights? Reply #3 – April 22, 2008, 07:01:30 AM I did that haystack. they come on but as usual only as long as you hold the stick backand paul.. no. Quote Selected
no headlights? Reply #4 – April 22, 2008, 08:33:27 AM sounds like a multifunction switch. you may get lucky and find the connection is just corroded, or you may need a whole new unit if that doesnt work. Quote Selected
no headlights? Reply #5 – April 22, 2008, 10:01:36 AM No autolamp/autodim DOES make it a bit easier to troubleshoot. Takes 2 sensors, alot of wires, and 3 relays out of the picture. Have you checked for continuity accross the headlamp switch yet? Quote Selected
no headlights? Reply #6 – April 22, 2008, 11:07:18 AM not yet my guy.im gonna try tonight, was too angry lastnight Quote Selected
no headlights? Reply #7 – April 22, 2008, 06:47:21 PM I would bet on the multi switch. I think that is what my problem was... Quote Selected
no headlights? Reply #8 – April 22, 2008, 09:46:34 PM Check the headlight switch for voltage on the black/orange wire ( hot at all times).Check for voltage on the red/yellow wire (hot with switch on). Quote Selected
no headlights? Reply #9 – April 23, 2008, 09:15:43 AM sounds alot like the bad connection that I had at the back of the multi function switch. For me it turned out to be the headlight low beam wire had a bad connection on the back of the multi switch. pulled it apart put in a new conector on that wire and all is good. Quote Selected
no headlights? Reply #10 – April 23, 2008, 01:16:55 PM i night have the switch if you need one. just put a pic of the one you got now and i will look. Quote Selected