Skip to main content ↑ ↓
Topic: Chromed My Bird (Read 1544 times) previous topic - next topic

Chromed My Bird

I had this emblem that looked like ass:


And figured i would further strip it down and re-paint it or something.

However, There was a nice shine coming through spots where i was sing away:


So i dug deeper:


What do ya know! With some work, You can get all the junk off and have a nice mirror finnish grille emblem!


I just used Q-Tips, Paint thinner for the paint/glue/sticky junk removal, Acetone for the more baked on stuff as well as some sing, Especially around the edges.

It comes out really nice, These pictures do it no justice... I'm glad i took the time to do it.

Shinyyyy:
~Project ThunderStorm = '84 Charcoal Thunderbird - First Car - Long Time Work in Progress~
~Project (No Name Yet) = 1970 Plymouth GTX/RR "Clone"~

Chromed My Bird

Reply #1 –
Nice work.It's nice to be able to improve parts we have for no money,and little effort.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

Chromed My Bird

Reply #2 –
I would say well worth the effort, nice job.

Chromed My Bird

Reply #3 –
Nice no money mod about how long did it take to clean it up? still looks like some effort.
[SIGPIC][/SIGPIC]


http://www.cardomain.com/id/Carpimp1987
1987 T-Bird AEROBIRD-GT had many many mods but is now totaled and is the car that made me want to start customizing everything all over again.
1988 T-Bird 5.0 HO DD/Sleeper/next project car :birdsmily:
1988 Cougar XR7 5.0 HO Vortech Supercharged being bulit right now :cougarsmily:

Chromed My Bird

Reply #4 –
Maybe I'll have to take some paint stipper to a spare one.  Thanks for the idea!
84 TC 302 -5.0L/t5/7.5 locking rear and a 3.45 gear, Edelbrock Intake, Aluminum Heads, Edlebrock 65mm Throttlebody, Edlebrock Cam, 24lb injectors & MAS Air Sensor calibrated via chip,  BBK headers, Catback H pipe, Magnaflow lers :evilgrin:
:pics-stfu:

 Project Thread with pics

Chromed My Bird

Reply #5 –
Quote from: Carpimp1987;210632
Nice no money mod about how long did it take to clean it up? still looks like some effort.

Took about an hour from start to finnish, maybe less.

Theres several layers you need to get through:
Plastic Covers~Pry off with an exacto knife or fingernail
Paint~Paint thinner is what i used
Thick gloopy glue stuff~Finger nail sing and then paint thinner on the remainder is what i used
More solid glue/The baked on stuff~Used sing and acetone to remove.

The hardest part was getting to the baked on glue stuff from the corner and edges, It kind of looks like pitting or wear in the chrome some of the time, But with some work it starts to come up.
I tried mostly using my fingernail, but for the tough stuff i i got piece of sharp edged thin but strong wood (used a wood clothes line clip) The chrome finnish underneath was so nice that i had to be really careful not to leave se lines/marks in it.
I found after getting it down to a thin layer, that acetone took it right up with some wiping.
~Project ThunderStorm = '84 Charcoal Thunderbird - First Car - Long Time Work in Progress~
~Project (No Name Yet) = 1970 Plymouth GTX/RR "Clone"~
 

Chromed My Bird

Reply #6 –
So its that for all 83-86 T-Birds might not get to do that but hopefully i might get a older Bird or Cat somewhere down the line.
[SIGPIC][/SIGPIC]


http://www.cardomain.com/id/Carpimp1987
1987 T-Bird AEROBIRD-GT had many many mods but is now totaled and is the car that made me want to start customizing everything all over again.
1988 T-Bird 5.0 HO DD/Sleeper/next project car :birdsmily:
1988 Cougar XR7 5.0 HO Vortech Supercharged being bulit right now :cougarsmily: