Skip to main content ↑ ↓
Topic: Pre-bent brake lines ? (Read 1823 times) previous topic - next topic

Pre-bent brake lines ?

Does anyone know of a company that makes pre bent brake lines fan 87-88 ?

Pre-bent brake lines ?

Reply #1 –
Highly doubtful that you'll find any.
Long live the 4-eyes!  - '83 Tbird Turbo - '85 Marquis LTS - '86 LTD Wagon

Pre-bent brake lines ?

Reply #2 –
I find it easier bending them myself.
you can buy a hand bending tool to do it fairly cheap
[SIGPIC][/SIGPIC]
***** Project "EVOLUTION" 1987 Cougar LS  & 1985 Cougar Convertible *****
[/COLOR]
5.0 HO 306 roller block, machined GT-40P heads, Wiseco dished forged pistons, Eagle forged floating I-beam connecting rods, Lunati pushrods, ARP bolts, Scorpion aluminum 1.6 rockers, Comp Cams Magnum 266HR, Explorer intake, 65mm TB, MAF Conversion, 19# injectors, Ford Racing stainless P-headers, 2-1/2" cat-less exhaust w/ Flowtech Afterburner lers , SC AOD with 2800 BDR torque converter, 3.73 T-Lok rear, CHE rear control arms, full 2-1/2" frame w/1" jacking rails & seat supports, Rear disk brakes, Turbine wheels, All original interior w/ floor shift upgrade .......
Pretty much every panel on my 87 is new, rebuilt, or re constructed. :D
Join us on Facebook
http://www.facebook.com/home.php?sk=group_137541156293768&ap=1

Pre-bent brake lines ?

Reply #3 –
Classic Tube has them. They're website says it's for an 86, but I'm the one that sent in the lines, and they came off of an 87-88 TC.

Pre-bent brake lines ?

Reply #4 –
Check with the Right Stuff Detailing, rightstuffdetailing.com  I don't know if they have anything yet, but you can send it to them and they will make one for you in steel or SS, and keep the dimentions on file for future orders.  I had them make the Driver's rear line on my 7.5" Mustang, but it looked  close to the 8.8" in the '86 TC I had.

Pre-bent brake lines ?

Reply #5 –
wouldnt brake lines for a mustang rear be the same as the tbird ones? if its a disc 8.8
RIP 1988 and 1990 Lincoln Mark VII LSC
I welcomed the dark side and currently am driving a 2000 Dodge Durango SLT plus, with a 5.9, Code named project "Night Runner"
Shes black on black, fully loaded, with headers, 180 tstat, e fan, straight exhaust into a cherry bomb vortex ler, full tune up, ported intake and T/B, MSD coil, and round aircleaner.
Mods to come: Fully rebuilt and heavily modded 46RE, and a richmond rachet locker.
my $300 beater ;)
R.I.P Kayleigh Raposa 12/18/90 - 2/24/07

brake lines

Reply #6 –
Quote from: daboss351;205188
wouldnt brake lines for a mustang rear be the same as the tbird ones? if its a disc 8.8


unless they have changed the mustang rear is 1" narrower than the bird,that 90's and down.

Pre-bent brake lines ?

Reply #7 –
the housings are the same. it's all in axle length that gives you the wider track. if you did need them for disk i would recomend looking at 93 cobras. same as a Tc rear. without the gear.
trick flow street heat intake , 24lbs injetors, ported GT-40's (Chip) long tube headers. and a Performance Automatic C4, with a hurst shifter!