Skip to main content ↑ ↓
Topic: Project Evolution *** Project Complete **** Wednesday July 9, 2014 (Read 1315797 times) previous topic - next topic

Project Evolution *** Project Complete **** Wednesday July 9, 2014

Reply #1965 –
I have thought about a full digi dash,but have no idea how to do it.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

Project Evolution *** Project Complete **** Wednesday July 9, 2014

Reply #1966 –
here's the wiring for it. you also need a digi sender. I also believe through testing, that you can wire the regular sender backwards, and it will read in the correct direction instead of backwards, there's a thread about that.

http://www.coolcats.net/tech/general/8588digital.html
[SIGPIC][/SIGPIC]
***** Project "EVOLUTION" 1987 Cougar LS  & 1985 Cougar Convertible *****
[/COLOR]
5.0 HO 306 roller block, machined GT-40P heads, Wiseco dished forged pistons, Eagle forged floating I-beam connecting rods, Lunati pushrods, ARP bolts, Scorpion aluminum 1.6 rockers, Comp Cams Magnum 266HR, Explorer intake, 65mm TB, MAF Conversion, 19# injectors, Ford Racing stainless P-headers, 2-1/2" cat-less exhaust w/ Flowtech Afterburner lers , SC AOD with 2800 BDR torque converter, 3.73 T-Lok rear, CHE rear control arms, full 2-1/2" frame w/1" jacking rails & seat supports, Rear disk brakes, Turbine wheels, All original interior w/ floor shift upgrade .......
Pretty much every panel on my 87 is new, rebuilt, or re constructed. :D
Join us on Facebook
http://www.facebook.com/home.php?sk=group_137541156293768&ap=1

Project Evolution *** Project Complete **** Wednesday July 9, 2014

Reply #1967 –
I really hate the tach on my full digi-dash.  You can't set idle by it.  Whenever I stomp on it, my brain takes too long searching the cluster to find out I've just buried into the red.  I have a sport cluster I am waiting to install.

Also, periodically my gas gauge will blink E.  But only on rare occasions.
The sounds it makes are nice .
My car is a gravity hybrid.  The gasoline engine gets me up the hills, and gravity gets me down.

Project Evolution *** Project Complete **** Wednesday July 9, 2014

Reply #1968 –
more of the same stuff. sanding and priming...
This should be the last of the flattening. After this(again, because I was paranoid it wasn''t flat enough), I will be priming a couple more coats, and on to the wet sanding. The last step before the finish paint. Well, it still needs to be sealed with epoxy again, before the paint,, but it's considered part of the finish painting. (I'm rambling, just look at the pics. lol)

here we are again, another coat of primer




Can't forget the little stuff


guide coat. I don't think I showed this step in the priming stage yet.




after a few minutes of using a 16" block. It's insanely flat




More sanding this week, then priming for the last time. :D
[SIGPIC][/SIGPIC]
***** Project "EVOLUTION" 1987 Cougar LS  & 1985 Cougar Convertible *****
[/COLOR]
5.0 HO 306 roller block, machined GT-40P heads, Wiseco dished forged pistons, Eagle forged floating I-beam connecting rods, Lunati pushrods, ARP bolts, Scorpion aluminum 1.6 rockers, Comp Cams Magnum 266HR, Explorer intake, 65mm TB, MAF Conversion, 19# injectors, Ford Racing stainless P-headers, 2-1/2" cat-less exhaust w/ Flowtech Afterburner lers , SC AOD with 2800 BDR torque converter, 3.73 T-Lok rear, CHE rear control arms, full 2-1/2" frame w/1" jacking rails & seat supports, Rear disk brakes, Turbine wheels, All original interior w/ floor shift upgrade .......
Pretty much every panel on my 87 is new, rebuilt, or re constructed. :D
Join us on Facebook
http://www.facebook.com/home.php?sk=group_137541156293768&ap=1

Project Evolution *** Project Complete **** Wednesday July 9, 2014

Reply #1969 –
Won't be long!
'88 'bird, 10.9:1 306 w/TFS top end, forged rods/pistons, T-5 swap & bunch of other stuff, 1-family owned, had it since ‘98, 5.0tbrd88 on Instagram and YouTube

Project Evolution *** Project Complete **** Wednesday July 9, 2014

Reply #1970 –
Update.. Trunk lid and hood are now sanded. sides tomorrow.
[SIGPIC][/SIGPIC]
***** Project "EVOLUTION" 1987 Cougar LS  & 1985 Cougar Convertible *****
[/COLOR]
5.0 HO 306 roller block, machined GT-40P heads, Wiseco dished forged pistons, Eagle forged floating I-beam connecting rods, Lunati pushrods, ARP bolts, Scorpion aluminum 1.6 rockers, Comp Cams Magnum 266HR, Explorer intake, 65mm TB, MAF Conversion, 19# injectors, Ford Racing stainless P-headers, 2-1/2" cat-less exhaust w/ Flowtech Afterburner lers , SC AOD with 2800 BDR torque converter, 3.73 T-Lok rear, CHE rear control arms, full 2-1/2" frame w/1" jacking rails & seat supports, Rear disk brakes, Turbine wheels, All original interior w/ floor shift upgrade .......
Pretty much every panel on my 87 is new, rebuilt, or re constructed. :D
Join us on Facebook
http://www.facebook.com/home.php?sk=group_137541156293768&ap=1

Project Evolution *** Project Complete **** Wednesday July 9, 2014

Reply #1971 –
I think you should sand it back down to the metal, Just to be sure you got it straight!
Old Grey Cat to this.88 Cat, 5.0 HO, CW mounts, mass air, CI custom cam, afr165's, Tmoss worked cobra intake, BBK shorty's,off road h pipe, magnaflow ex. T-5,spec stage 2 clutch, 8.8 373 TC trac loc, che ajustables with bullits on the rear. 11" brakes up front. +
 

Project Evolution *** Project Complete **** Wednesday July 9, 2014

Reply #1972 –
I haven't been on much in the past 2 weeks, computer virus. It's looking good! Almost time to see some color!

Project Evolution *** Project Complete **** Wednesday July 9, 2014

Reply #1973 –
Quote from: Kitz Kat;310633
I think you should sand it back down to the metal, Just to be sure you got it straight!


I agree completely.No need in taking any chances after all you've put in to it.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

Project Evolution *** Project Complete **** Wednesday July 9, 2014

Reply #1974 –
I get the feeling he didn't like that comment. It was a joke, Your doing a great job.
Old Grey Cat to this.88 Cat, 5.0 HO, CW mounts, mass air, CI custom cam, afr165's, Tmoss worked cobra intake, BBK shorty's,off road h pipe, magnaflow ex. T-5,spec stage 2 clutch, 8.8 373 TC trac loc, che ajustables with bullits on the rear. 11" brakes up front. +

Project Evolution *** Project Complete **** Wednesday July 9, 2014

Reply #1975 –
Quote from: Kitz Kat;310940
I get the feeling he didn't like that comment. It was a joke, Your doing a great job.


I actually didn't see it until now. I would do it again if I had to. :D
[SIGPIC][/SIGPIC]
***** Project "EVOLUTION" 1987 Cougar LS  & 1985 Cougar Convertible *****
[/COLOR]
5.0 HO 306 roller block, machined GT-40P heads, Wiseco dished forged pistons, Eagle forged floating I-beam connecting rods, Lunati pushrods, ARP bolts, Scorpion aluminum 1.6 rockers, Comp Cams Magnum 266HR, Explorer intake, 65mm TB, MAF Conversion, 19# injectors, Ford Racing stainless P-headers, 2-1/2" cat-less exhaust w/ Flowtech Afterburner lers , SC AOD with 2800 BDR torque converter, 3.73 T-Lok rear, CHE rear control arms, full 2-1/2" frame w/1" jacking rails & seat supports, Rear disk brakes, Turbine wheels, All original interior w/ floor shift upgrade .......
Pretty much every panel on my 87 is new, rebuilt, or re constructed. :D
Join us on Facebook
http://www.facebook.com/home.php?sk=group_137541156293768&ap=1

Project Evolution *** Project Complete **** Wednesday July 9, 2014

Reply #1976 –
progress as of friday.


[SIGPIC][/SIGPIC]
***** Project "EVOLUTION" 1987 Cougar LS  & 1985 Cougar Convertible *****
[/COLOR]
5.0 HO 306 roller block, machined GT-40P heads, Wiseco dished forged pistons, Eagle forged floating I-beam connecting rods, Lunati pushrods, ARP bolts, Scorpion aluminum 1.6 rockers, Comp Cams Magnum 266HR, Explorer intake, 65mm TB, MAF Conversion, 19# injectors, Ford Racing stainless P-headers, 2-1/2" cat-less exhaust w/ Flowtech Afterburner lers , SC AOD with 2800 BDR torque converter, 3.73 T-Lok rear, CHE rear control arms, full 2-1/2" frame w/1" jacking rails & seat supports, Rear disk brakes, Turbine wheels, All original interior w/ floor shift upgrade .......
Pretty much every panel on my 87 is new, rebuilt, or re constructed. :D
Join us on Facebook
http://www.facebook.com/home.php?sk=group_137541156293768&ap=1

Project Evolution *** Project Complete **** Wednesday July 9, 2014

Reply #1977 –
I'll probably start sanding mine next month. It's gunna hurt to put the sander to it at first, but then I will be dedicated. I was hoping to have it done last year.
Old Grey Cat to this.88 Cat, 5.0 HO, CW mounts, mass air, CI custom cam, afr165's, Tmoss worked cobra intake, BBK shorty's,off road h pipe, magnaflow ex. T-5,spec stage 2 clutch, 8.8 373 TC trac loc, che ajustables with bullits on the rear. 11" brakes up front. +

Project Evolution *** Project Complete **** Wednesday July 9, 2014

Reply #1978 –
it's always tough to start. I felt the same way when I started cutting entire sections off the car.  There's no turning back from that.
[SIGPIC][/SIGPIC]
***** Project "EVOLUTION" 1987 Cougar LS  & 1985 Cougar Convertible *****
[/COLOR]
5.0 HO 306 roller block, machined GT-40P heads, Wiseco dished forged pistons, Eagle forged floating I-beam connecting rods, Lunati pushrods, ARP bolts, Scorpion aluminum 1.6 rockers, Comp Cams Magnum 266HR, Explorer intake, 65mm TB, MAF Conversion, 19# injectors, Ford Racing stainless P-headers, 2-1/2" cat-less exhaust w/ Flowtech Afterburner lers , SC AOD with 2800 BDR torque converter, 3.73 T-Lok rear, CHE rear control arms, full 2-1/2" frame w/1" jacking rails & seat supports, Rear disk brakes, Turbine wheels, All original interior w/ floor shift upgrade .......
Pretty much every panel on my 87 is new, rebuilt, or re constructed. :D
Join us on Facebook
http://www.facebook.com/home.php?sk=group_137541156293768&ap=1

Project Evolution *** Project Complete **** Wednesday July 9, 2014

Reply #1979 –
Not when you cut them off there's not.
Old Grey Cat to this.88 Cat, 5.0 HO, CW mounts, mass air, CI custom cam, afr165's, Tmoss worked cobra intake, BBK shorty's,off road h pipe, magnaflow ex. T-5,spec stage 2 clutch, 8.8 373 TC trac loc, che ajustables with bullits on the rear. 11" brakes up front. +