coil-over users

Topic: coil-over users (Read 1570 times) previous topic - next topic

coil-over users

November 23, 2007, 01:58:00 PM

What spring rates are you using, what car and application?

FYI I'm looking for a rate comparable to stock for a TC.

coil-over users

Reply #1 – November 23, 2007, 03:15:11 PM

Stock rate was ~415 lb/in up front and ~210 lb/in out back.

This would correlate to a ~115 lb/in coil-over spring in front and ~93 lb/in out back.

I currently have 275 lb/in coil-over springs in front with the factory springs out back. There is a definite mismatch between the front and rears.

The 275s up front are a lot stiffer than the factory springs, but they aren't really uncomfortable.

coil-over users

Reply #2 – November 23, 2007, 04:04:59 PM

These guys have four choices, 12"/250s, 14"/175s, 14"/150s and no springs.

http://dynamicracingproducts.com/AutoPartsStore/product_info.php?cPath=1_18&products_id=214

As I understand it, 14" is a bit tall for a coil over spring?

Jeremy, what engine do you have? Relocated battery? Any other weight changes?

Thanks

coil-over users

Reply #3 – November 23, 2007, 07:10:01 PM

I have the CFI 3.8L with all the options still installed. Battery in factory location. 12" springs.

coil-over users

Reply #4 – November 23, 2007, 10:02:34 PM

400's, but im not goin for anything near stock rates

coil-over users

Reply #5 – November 24, 2007, 02:31:22 PM

Thanks for the feedback.