Skip to main content
Topic: rear/front coil spring isolators (Read 1755 times) previous topic - next topic

rear/front coil spring isolators

I am having problem locating rear/front coil spring rubber isolators,does anyone have a brand and a part number of ones that will fit. My car is a 1984 tbird-302
Thx

 

rear/front coil spring isolators

Reply #1
I used energy suspension for my coil springs front and rear. i called jegs and they had some part number. 1-800-345-4545  the isolators fit perfect first time. you have a choice between red or black. :D

rear/front coil spring isolators

Reply #2
i called jegs they were some help.they do have  energy suspension isolators,they can not tell me which ones fit my car.So it is going to take some measuring and comparing to go this route.

rear/front coil spring isolators

Reply #3
CHE but there not rubber.
Old Grey Cat to this.88 Cat, 5.0 HO, CW mounts, mass air, CI custom cam, afr165's, Tmoss worked cobra intake, BBK shorty's,off road h pipe, magnaflow ex. T-5,spec stage 2 clutch, 8.8 373 TC trac loc, che ajustables with bullits on the rear. 11" brakes up front. +

rear/front coil spring isolators

Reply #4
Latemodel Restoration Services used to carry the rubber variety, but it looks like they don't any more. I purchased mine from them.

fastpartsnetwork shows the rears are $5.53/ea. for the upper and $5.82/ea. for the lower
The front lowers are $5.07/ea. They don't show anything for the upper.
However, just because they show them in stock doesn't mean they have them.

All '83-'88 T-birds/Cougars use the same isolators. All Fox Mustangs use the same isolators as our cars.

rear/front coil spring isolators

Reply #5
Thx for the info.
When I say rubber isolator,i was just describing the part.I realize there are different materials. They look rubber like.

rear/front coil spring isolators

Reply #6
I got mine from CHE.  I believe they are energy suspension brand.
84 TC 302 -5.0L/t5/7.5 locking rear and a 3.45 gear, Edelbrock Intake, Aluminum Heads, Edlebrock 65mm Throttlebody, Edlebrock Cam, 24lb injectors & MAS Air Sensor calibrated via chip,  BBK headers, Catback H pipe, Magnaflow lers :evilgrin:
:pics-stfu:

 Project Thread with pics