Skip to main content ↑ ↓
Topic: FS: foxbody Mustang parts (Read 1073 times) previous topic - next topic

FS: foxbody Mustang parts

1. 87-93 LX taillights (pair). These are Mexican aftermarket parts and they do not fit that well, but they look perfect from 10 ft away. Cracked in one place, a little epoxy will fix that. $10 + shipping



2. taillight assemblies: original ford parts ready to be installed. I think this fits 85-93 models, or to convert the older models to the newer design. $20 + shipping



3. 87-89 steering wheel with cruise control. Everything works, but the "resume" button on the wheel is chipped and the back of the rim has small chunks missing. $5 + shipping




4. 87-93 Mustang power window switch covers for CONVERTIBLES, no buttons just the covers. These go on the doors. Both have intact lettering, but the black paint is faded and worn out. Mask the letters and respray and they'll look perfect.$10 + shipping
pro-five-oh

88 Cougar XR-7...5.0HO, T-56, and much more                             
85 Thunderbird 30th...#2471, 29k, all original and might actually stay that way

FS: foxbody Mustang parts

Reply #1 –
Where are the "small chunks" missing from?I can't tell.Is it the wheel itself,or the plastic ring on the back?
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

FS: foxbody Mustang parts

Reply #2 –
Its on the wheel itself.  The pic sucks, but its those dark spots on the backside picture between 11:00 and 12:00.
pro-five-oh

88 Cougar XR-7...5.0HO, T-56, and much more                             
85 Thunderbird 30th...#2471, 29k, all original and might actually stay that way

FS: foxbody Mustang parts

Reply #3 –
Could you figure out shipping on the steering wheel to 02885? That would be so much better then my cruddy Turbo Coupe wheel.
RIP 1988 and 1990 Lincoln Mark VII LSC
I welcomed the dark side and currently am driving a 2000 Dodge Durango SLT plus, with a 5.9, Code named project "Night Runner"
Shes black on black, fully loaded, with headers, 180 tstat, e fan, straight exhaust into a cherry bomb vortex ler, full tune up, ported intake and T/B, MSD coil, and round aircleaner.
Mods to come: Fully rebuilt and heavily modded 46RE, and a richmond rachet locker.
my $300 beater ;)
R.I.P Kayleigh Raposa 12/18/90 - 2/24/07
 

FS: foxbody Mustang parts

Reply #4 –
Quote from: daboss351;182505
Could you figure out shipping on the steering wheel to 02885? That would be so much better then my cruddy Turbo Coupe wheel.


Shipping is about $12. I am looking for a turbo coupe horn pad (no broken tabs) and maybe the steering wheel too.

Send me pics of the wheel and horn pad (three plastic tabs) and maybe we can to an even exchange.

Thanks!
pro-five-oh

88 Cougar XR-7...5.0HO, T-56, and much more                             
85 Thunderbird 30th...#2471, 29k, all original and might actually stay that way

FS: foxbody Mustang parts

Reply #5 –
the wheel is junk, big chunk missing from the top, but the horn pad is in good shape. I will go pull it from my car and take a pic.
RIP 1988 and 1990 Lincoln Mark VII LSC
I welcomed the dark side and currently am driving a 2000 Dodge Durango SLT plus, with a 5.9, Code named project "Night Runner"
Shes black on black, fully loaded, with headers, 180 tstat, e fan, straight exhaust into a cherry bomb vortex ler, full tune up, ported intake and T/B, MSD coil, and round aircleaner.
Mods to come: Fully rebuilt and heavily modded 46RE, and a richmond rachet locker.
my $300 beater ;)
R.I.P Kayleigh Raposa 12/18/90 - 2/24/07

FS: foxbody Mustang parts

Reply #6 –
Whats your email. I can send the pics from my phone to your email
RIP 1988 and 1990 Lincoln Mark VII LSC
I welcomed the dark side and currently am driving a 2000 Dodge Durango SLT plus, with a 5.9, Code named project "Night Runner"
Shes black on black, fully loaded, with headers, 180 tstat, e fan, straight exhaust into a cherry bomb vortex ler, full tune up, ported intake and T/B, MSD coil, and round aircleaner.
Mods to come: Fully rebuilt and heavily modded 46RE, and a richmond rachet locker.
my $300 beater ;)
R.I.P Kayleigh Raposa 12/18/90 - 2/24/07

FS: foxbody Mustang parts

Reply #7 –
Quote from: daboss351;182530
Whats your email. I can send the pics from my phone to your email

profiveohATgmailDOTcom

Please give me shots of the three tabs on the back that lock/twist into the wheel.

If the horn pad is nice, we can make it an even swap, don't worry about the shipping differences.
pro-five-oh

88 Cougar XR-7...5.0HO, T-56, and much more                             
85 Thunderbird 30th...#2471, 29k, all original and might actually stay that way

FS: foxbody Mustang parts

Reply #8 –
sending them now should get them soon.
You should get 3 pictures.
RIP 1988 and 1990 Lincoln Mark VII LSC
I welcomed the dark side and currently am driving a 2000 Dodge Durango SLT plus, with a 5.9, Code named project "Night Runner"
Shes black on black, fully loaded, with headers, 180 tstat, e fan, straight exhaust into a cherry bomb vortex ler, full tune up, ported intake and T/B, MSD coil, and round aircleaner.
Mods to come: Fully rebuilt and heavily modded 46RE, and a richmond rachet locker.
my $300 beater ;)
R.I.P Kayleigh Raposa 12/18/90 - 2/24/07

FS: foxbody Mustang parts

Reply #9 –
I got the pics...I want it, please!

Give me your mailing address and I'll ship the wheel.  You can ship me the pad now or after you get the wheel. Sound fair?
pro-five-oh

88 Cougar XR-7...5.0HO, T-56, and much more                             
85 Thunderbird 30th...#2471, 29k, all original and might actually stay that way

FS: foxbody Mustang parts

Reply #10 –
Sounds  fair to me! I have to ship other stuff too, so I'll box it up and try to go tomorrow after school.
Need your info though
mines
mason scott
12 paquin street
warren, rhode island
02885
RIP 1988 and 1990 Lincoln Mark VII LSC
I welcomed the dark side and currently am driving a 2000 Dodge Durango SLT plus, with a 5.9, Code named project "Night Runner"
Shes black on black, fully loaded, with headers, 180 tstat, e fan, straight exhaust into a cherry bomb vortex ler, full tune up, ported intake and T/B, MSD coil, and round aircleaner.
Mods to come: Fully rebuilt and heavily modded 46RE, and a richmond rachet locker.
my $300 beater ;)
R.I.P Kayleigh Raposa 12/18/90 - 2/24/07

FS: foxbody Mustang parts

Reply #11 –
You got a PM with my mailing address. I need to find a box big enough for the wheel, but once I do, it will be sent. I will contact you sometime next week when I mail it. Feel free to keep the pad until I contact you. :)

I know your Mark VII is blue/blue, I'm parting out a rust-free 86 blue/blue LSC and maybe I can get you some stuff for cheap on that too.

Send me a list of wanted parts for the LSC in that box and maybe later I can hook you up.
pro-five-oh

88 Cougar XR-7...5.0HO, T-56, and much more                             
85 Thunderbird 30th...#2471, 29k, all original and might actually stay that way

FS: foxbody Mustang parts

Reply #12 –
Pmed you back . thanks, and you have been on here long enough, and other sites I'm on, I know I don't have to question your honesty, so I'll ship it asap. Other wise I might forget anyway!
God I wish you were closer, I need 2 front fenders and a trunk lid, mine are gone. Lucky southerners! But ill make a list of things and stick it in there!
RIP 1988 and 1990 Lincoln Mark VII LSC
I welcomed the dark side and currently am driving a 2000 Dodge Durango SLT plus, with a 5.9, Code named project "Night Runner"
Shes black on black, fully loaded, with headers, 180 tstat, e fan, straight exhaust into a cherry bomb vortex ler, full tune up, ported intake and T/B, MSD coil, and round aircleaner.
Mods to come: Fully rebuilt and heavily modded 46RE, and a richmond rachet locker.
my $300 beater ;)
R.I.P Kayleigh Raposa 12/18/90 - 2/24/07

FS: foxbody Mustang parts

Reply #13 –
Quote from: daboss351;182554
Pmed you back . thanks, and you have been on here long enough, and other sites I'm on, I know I don't have to question your honesty, so I'll ship it asap. Other wise I might forget anyway!
God I wish you were closer, I need 2 front fenders and a trunk lid, mine are gone. Lucky southerners! But ill make a list of things and stick it in there!


I won't disappoint ya on the honesty thing. Just ask Eric. :)

Find a way to ship stuff cheap from Houston and I'll have those body parts for ya.  Otherwise, I have a lot of other stuff that might help your list. :)
pro-five-oh

88 Cougar XR-7...5.0HO, T-56, and much more                             
85 Thunderbird 30th...#2471, 29k, all original and might actually stay that way

FS: foxbody Mustang parts

Reply #14 –
I'll see what I can do, and I am already writing that list.
RIP 1988 and 1990 Lincoln Mark VII LSC
I welcomed the dark side and currently am driving a 2000 Dodge Durango SLT plus, with a 5.9, Code named project "Night Runner"
Shes black on black, fully loaded, with headers, 180 tstat, e fan, straight exhaust into a cherry bomb vortex ler, full tune up, ported intake and T/B, MSD coil, and round aircleaner.
Mods to come: Fully rebuilt and heavily modded 46RE, and a richmond rachet locker.
my $300 beater ;)
R.I.P Kayleigh Raposa 12/18/90 - 2/24/07