Skip to main content ↑ ↓
Topic: Governor for an AOD.... (Read 1016 times) previous topic - next topic

Governor for an AOD....

Does anyone have a thrashed AOD they'd be willing to part out and give up the governor?If so,please let me know.Thanks.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

Re: Governor for an AOD....

Reply #1 –
I'll be pulling my aod in about two weeks and replacing it. (been acting up) If no one else has one let me know. I was just going to tear it apart anyway to see if I could rebuild it.

Re: Governor for an AOD....

Reply #2 –
What do you want for it?Let me know.Thanks a lot.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

Re: Governor for an AOD....

Reply #3 –
Hey vin, i think i've got one 20 bucks shipped.
Just curious, why do you need one?
 

Re: Governor for an AOD....

Reply #4 –
I think mine may be sticking.I haven't pulled the tail shaft yet.I know I can probably take it apart and clean it,make sure there are no pieces of  anywhere.I'd like to have one to install when I pull mine out.Less down time (although it really doesn't take that long to do the job).I'm getting some vibration around 70 mph,and my tranny isn't going into gear in the morning like it should.Just started doing that a couple of weeks ago.When I do the H.O. swap,the tranny will be swapped also.I'm just not exactly sure when I'll have time to do it.Any ideas?
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..