Skip to main content ↑ ↓
Topic: Dammit vinnie, this good enough? (Read 1507 times) previous topic - next topic

Dammit vinnie, this good enough?


 

 
 
 
THERE. Haha that should ease the pain you (and I guess everyone else really) is experiencing. Honestly I REALLY like those better and think the car looks badass with em. But those stupid soft compound WIDE 150mph tires dad put on em wear quick I'm sure so I just put em on ocassionally. This was earlier this summer.
 
All better now? lol :flip:
1987 20th Anniversary Cougar, 302 "5.0" GT-40 heads (F3ZE '93 Cobra) and TMoss Ported H.O. intake, H.O. camshaft
2.5" Duals, no cats, Flowmaster 40s, Richmond 3.73s w/ Trac-Lok, maxed out Baumann shift kit, 3000 RPM Dirty Dog non-lock TC
Aside from the Mustang crinkle headers, still looks like it's only 150 HP...
1988 Black XR7 Trick Flow top end, Tremec 3550
1988 Black XR7 Procharger P600B intercooled, Edelbrock Performer non-RPM heads, GT40 intake AOD, 13 PSI @5000 RPM. 93 octane

Dammit vinnie, this good enough?

Reply #1 –
Is it leaking something?
93 Festiva L, 193k miles, BP+T/G25MR swap, T3 50trim .48/.42, SRT FMIC, Capri electronics/Rocketchip, 2.5" exhaust
bests: ET 12.86, MPH 110.25, 1.92 short
02 Subaru Impreza WRX, 129k miles
97 Subaru Impreza Outback Sport, 236k miles

Dammit vinnie, this good enough?

Reply #2 –
HOOOORAH!!!!!
No more old person look!!
RIP 1988 and 1990 Lincoln Mark VII LSC
I welcomed the dark side and currently am driving a 2000 Dodge Durango SLT plus, with a 5.9, Code named project "Night Runner"
Shes black on black, fully loaded, with headers, 180 tstat, e fan, straight exhaust into a cherry bomb vortex ler, full tune up, ported intake and T/B, MSD coil, and round aircleaner.
Mods to come: Fully rebuilt and heavily modded 46RE, and a richmond rachet locker.
my $300 beater ;)
R.I.P Kayleigh Raposa 12/18/90 - 2/24/07

Dammit vinnie, this good enough?

Reply #3 –
I like those tires better,but for your car,I like the turbines better.You're half way there.If you would just do what I say,the world would be a better place.Take the white..............walls (sorry,I almost threw up),and put them on the ten holes,and the blackwalls on turbines.Easy fix to a horrible,hidious dilemma.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

Dammit vinnie, this good enough?

Reply #4 –
yea they turbines go so much better because theres no chrome or brushed aluminum on the car to match the 10 holes.
RIP 1988 and 1990 Lincoln Mark VII LSC
I welcomed the dark side and currently am driving a 2000 Dodge Durango SLT plus, with a 5.9, Code named project "Night Runner"
Shes black on black, fully loaded, with headers, 180 tstat, e fan, straight exhaust into a cherry bomb vortex ler, full tune up, ported intake and T/B, MSD coil, and round aircleaner.
Mods to come: Fully rebuilt and heavily modded 46RE, and a richmond rachet locker.
my $300 beater ;)
R.I.P Kayleigh Raposa 12/18/90 - 2/24/07

Dammit vinnie, this good enough?

Reply #5 –
Plus,those turbines are specific to that model car.I have a set just like them in the garage......doing nothing.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

Dammit vinnie, this good enough?

Reply #6 –
Haha. That is definitely an idea. I think you got the right idea, and a good way to solve our worlds ills. Everyone should just....do as vinnie says! :hick:
 
Thats a neat thought tho. And yes the gold turbines are meant for it so for that reason I like them too. So I dont know if Im gonna swap the tires. Like I said those others are very soft compound.
 
So let me get this straight. We've moved away from joking, to SERIOUS BUSINESS. This is actually bothering you guys huh? Haha thats reason enough for me to leave it as is! Again the tread on em is real good so it would be a huge waste not to use them. Sorry guys. *awaits temp-ban*
 
 
 
@bhazard...
 
YES *sigh* it leaks a little. MAN someone just HAD to notice that plywood paneling. Thought it was pretty much invisible. I think its the tranny pan gasket. Line connections are dry. Been meaning to do that for awhile. Its very very slow but my mom flips out if she sees even one spot so I gotta be extra-special-careful. Cant wait til I got my own place lol......
1987 20th Anniversary Cougar, 302 "5.0" GT-40 heads (F3ZE '93 Cobra) and TMoss Ported H.O. intake, H.O. camshaft
2.5" Duals, no cats, Flowmaster 40s, Richmond 3.73s w/ Trac-Lok, maxed out Baumann shift kit, 3000 RPM Dirty Dog non-lock TC
Aside from the Mustang crinkle headers, still looks like it's only 150 HP...
1988 Black XR7 Trick Flow top end, Tremec 3550
1988 Black XR7 Procharger P600B intercooled, Edelbrock Performer non-RPM heads, GT40 intake AOD, 13 PSI @5000 RPM. 93 octane

Dammit vinnie, this good enough?

Reply #7 –
psh you should see my driveway from my car hahahahaha oil and gas everywhere!
RIP 1988 and 1990 Lincoln Mark VII LSC
I welcomed the dark side and currently am driving a 2000 Dodge Durango SLT plus, with a 5.9, Code named project "Night Runner"
Shes black on black, fully loaded, with headers, 180 tstat, e fan, straight exhaust into a cherry bomb vortex ler, full tune up, ported intake and T/B, MSD coil, and round aircleaner.
Mods to come: Fully rebuilt and heavily modded 46RE, and a richmond rachet locker.
my $300 beater ;)
R.I.P Kayleigh Raposa 12/18/90 - 2/24/07

Dammit vinnie, this good enough?

Reply #8 –
If you want to keep the white.......walls (almost lost it again....),then turn them around backwards so the whitewalls are on the inside.Don't let your car roll around in shame just to spite all of us.In the long run,you're only hurting yourself.The car is probably leaking because it needs those tires to disappear...quickly.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

Dammit vinnie, this good enough?

Reply #9 –
Well I only did it cause they were cupped and my cousin said it was enough that I should flip them. I hope everyone understands that. I didnt WANT to do it. Oh and it leaked since my dad owned it. Maybe it just doesn't like dad and I.
1987 20th Anniversary Cougar, 302 "5.0" GT-40 heads (F3ZE '93 Cobra) and TMoss Ported H.O. intake, H.O. camshaft
2.5" Duals, no cats, Flowmaster 40s, Richmond 3.73s w/ Trac-Lok, maxed out Baumann shift kit, 3000 RPM Dirty Dog non-lock TC
Aside from the Mustang crinkle headers, still looks like it's only 150 HP...
1988 Black XR7 Trick Flow top end, Tremec 3550
1988 Black XR7 Procharger P600B intercooled, Edelbrock Performer non-RPM heads, GT40 intake AOD, 13 PSI @5000 RPM. 93 octane

Dammit vinnie, this good enough?

Reply #10 –
It may not like you guys.I'll give you $50.00 for it,and,I'll fly up there to pick it up.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

Dammit vinnie, this good enough?

Reply #11 –
For the love of all things sacred, take those 10 holes off the car!

I said it before and I'll say it again, the whitewalls aren't bad.
That said, if you need tires that are relatively inexpensive and will get you around in all kinds of weather, get these

I have them on my '88 and they are awesome in rain and pretty good in snow too.

So $72 a piece x4 = $288. Say shipping on the high side $50 (although it won't be that much). That brings you to $338. Now stick the 10 holes on the car and physically bring each of the new tires and your turbines over to Wal-Mart. DO NOT drive the car there, walk the tires and wheels in!  It will cost around $45 to have the new ones mounted and balanced as well as the old ones disposed of.

So for $383 you can be pimpin on fresh blackwall rubber on your turbines that will look great, handle great, and keep Vinnie from choking on his own vomit.

Dammit vinnie, this good enough?

Reply #12 –
Thanks for lookin' out for me......and my weak stomach.LOL.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

Dammit vinnie, this good enough?

Reply #13 –
i like the 10 holes over the turbines
[SIGPIC][/SIGPIC]
1974 maverick lsx powered turbo car SOLD
1973 maverick Tijuana Taxi Tribute
1957 chevy LSX Turbo project (race car)
Owner of Joe Dirt Fabrication

Dammit vinnie, this good enough?

Reply #14 –
but again,, the turbines go on that car:D

Vinnie,, im looking for a set of turbines.  I need atleast a spare that matches my car.  Purchase came with no spare, just the doughnut.