Skip to main content
Topic: Found an old pic of my 86' (Read 2639 times) previous topic - next topic

Found an old pic of my 86'

I was going thru some old mm&ff magazines the other day and found one of my old pics of the bird. This was taken right after I completed the LSC suspension swap.


86' T/C 4.6L DOHC
16' Chebby Cruze 1.4L Turbo
17’ Peterbilt 389 600hp 1850ftlb Trq 18spd

[SIGPIC][/SIGPIC]

“Heavy Metal Mistress”
[/COLOR][/SIZE]

Found an old pic of my 86'

Reply #1
You put airride in the bird? Thats awesome! What kind of wheels are those?
RIP 1988 and 1990 Lincoln Mark VII LSC
I welcomed the dark side and currently am driving a 2000 Dodge Durango SLT plus, with a 5.9, Code named project "Night Runner"
Shes black on black, fully loaded, with headers, 180 tstat, e fan, straight exhaust into a cherry bomb vortex ler, full tune up, ported intake and T/B, MSD coil, and round aircleaner.
Mods to come: Fully rebuilt and heavily modded 46RE, and a richmond rachet locker.
my $300 beater ;)
R.I.P Kayleigh Raposa 12/18/90 - 2/24/07

Found an old pic of my 86'

Reply #2
No air ride, just the rear axle, front spindles and rotors/brakes. The wheels are from a 88' Mistu Conquest/Dodge Starion. 16X8s & 16X9s.
The rear suspension has since been changed to a 03' Cobra IRS setup.


86' T/C 4.6L DOHC
16' Chebby Cruze 1.4L Turbo
17’ Peterbilt 389 600hp 1850ftlb Trq 18spd

[SIGPIC][/SIGPIC]

“Heavy Metal Mistress”
[/COLOR][/SIZE]

Found an old pic of my 86'

Reply #3
Did those wheels bolt on?
One 88

 

Found an old pic of my 86'

Reply #4
Those wheels looked good! You need recent pics
"Real cars dont power the front wheels, they lift them"
[SIGPIC][/SIGPIC]
1984 Mercury Cougar GS 5.0:cougarsmily: BBK Equal Length Shorties, BBK O/R X-Pipe, Magnaflow Magnapacks, Mustang GT Stainless Tailpipes, 18" Magnaflow Rolled Edge Tips. Turbo Coupe Hood, Mach 1 Chin Spoiler. 17"x9" Cobra R's, Falken Ziex 255/50s, and 245/45s.
1984 Ford Thunderbird 3.8L "Drag Queen"
2009 Dodge Ram 1500 Lone Star Edition 5.7L Hemi 400hp, lex DOD14M Magnaflow retro-fit ler kit

Found an old pic of my 86'

Reply #5
Sweet:D

Is the current one going to look like that?
88 Thunderbird LX: 306, Edelbrock Performer heads, Comp 266HR cam, Edelbrock Performer RPM intake, bunch of other stuff.

Found an old pic of my 86'

Reply #6
CougarSE, other than using a milling machine to open up the center a bit, yes they bolted right on. Same bolt pattern :D

cougrrr302, the most recent pics are in my cardomain pages. The car is still in reconstruction.

thunderjet302, they are one in the same car :D

I have more pics of the car on a disc somewhere. I just have to find them. They are shortly after I bought it.
John


86' T/C 4.6L DOHC
16' Chebby Cruze 1.4L Turbo
17’ Peterbilt 389 600hp 1850ftlb Trq 18spd

[SIGPIC][/SIGPIC]

“Heavy Metal Mistress”
[/COLOR][/SIZE]

Found an old pic of my 86'

Reply #7
Quote from: 1BadBird;175486
...The rear suspension has since been changed to a 03' Cobra IRS setup.


Just curious but did you do any measuring of anything before/when you did that swap and maybe still have the numbers around? I've got a Mark VIII irs just lying about and though I know it'd be too wide... I still get dumb ideas.

Found an old pic of my 86'

Reply #8
The MKVIII IRS is a different type of setup all together. The Cobra IRS almost bolts right in. Sorry :(  No numbers available.


86' T/C 4.6L DOHC
16' Chebby Cruze 1.4L Turbo
17’ Peterbilt 389 600hp 1850ftlb Trq 18spd

[SIGPIC][/SIGPIC]

“Heavy Metal Mistress”
[/COLOR][/SIZE]

Found an old pic of my 86'

Reply #9
I meant to ask if it was going to look the same when you were done but I typed wrong:hick:
88 Thunderbird LX: 306, Edelbrock Performer heads, Comp 266HR cam, Edelbrock Performer RPM intake, bunch of other stuff.

Found an old pic of my 86'

Reply #10
Naaaa, I'm going to paint it a different color :) I also be putting different wheels on it.


86' T/C 4.6L DOHC
16' Chebby Cruze 1.4L Turbo
17’ Peterbilt 389 600hp 1850ftlb Trq 18spd

[SIGPIC][/SIGPIC]

“Heavy Metal Mistress”
[/COLOR][/SIZE]

Found an old pic of my 86'

Reply #11
The factory color scheme looks pretty cool though;)
88 Thunderbird LX: 306, Edelbrock Performer heads, Comp 266HR cam, Edelbrock Performer RPM intake, bunch of other stuff.

Found an old pic of my 86'

Reply #12
Ya, it's ok I guess. But I like the colors that I've choosen for it better :D That part I'm going to keep secret until I actually start to do the painting  :evilgrin:  Hopefully I'll be getting to the body work soon.


John


86' T/C 4.6L DOHC
16' Chebby Cruze 1.4L Turbo
17’ Peterbilt 389 600hp 1850ftlb Trq 18spd

[SIGPIC][/SIGPIC]

“Heavy Metal Mistress”
[/COLOR][/SIZE]

Found an old pic of my 86'

Reply #13
i want those wheels for my lincoln! im gonna have to search for some. I have access to a milling machine so i can mill them.
RIP 1988 and 1990 Lincoln Mark VII LSC
I welcomed the dark side and currently am driving a 2000 Dodge Durango SLT plus, with a 5.9, Code named project "Night Runner"
Shes black on black, fully loaded, with headers, 180 tstat, e fan, straight exhaust into a cherry bomb vortex ler, full tune up, ported intake and T/B, MSD coil, and round aircleaner.
Mods to come: Fully rebuilt and heavily modded 46RE, and a richmond rachet locker.
my $300 beater ;)
R.I.P Kayleigh Raposa 12/18/90 - 2/24/07

Found an old pic of my 86'

Reply #14
daboss351, you have to be carefull when milling the centers out. My friend and I almost cut thru where the center sticks out. Unless, of course you cut them off and then center some spinners or center caps and screw them on. Oh ya, good luck finding a good set of those wheels. I had 1 that was dented, 2 that were curb scratched and 1 was ok. I found a set of them here in IL and I got 1 16x7 2 16x8 and only 1 16x9. I was trying for 4 16x9s, oh well. Good luck finding them though


John

P.S. I do have a set of space savers that I can put on my car until I get the wheels I want :evilgrin: and you can get mine from me  :D


86' T/C 4.6L DOHC
16' Chebby Cruze 1.4L Turbo
17’ Peterbilt 389 600hp 1850ftlb Trq 18spd

[SIGPIC][/SIGPIC]

“Heavy Metal Mistress”
[/COLOR][/SIZE]