Skip to main content ↑ ↓
Topic: New and used parts for sale, rare and performance (Read 2367 times) previous topic - next topic

New and used parts for sale, rare and performance

Reply #15 –
lol ok nvm then, figured that would be a nice gift for my dad
RIP 1988 and 1990 Lincoln Mark VII LSC
I welcomed the dark side and currently am driving a 2000 Dodge Durango SLT plus, with a 5.9, Code named project "Night Runner"
Shes black on black, fully loaded, with headers, 180 tstat, e fan, straight exhaust into a cherry bomb vortex ler, full tune up, ported intake and T/B, MSD coil, and round aircleaner.
Mods to come: Fully rebuilt and heavily modded 46RE, and a richmond rachet locker.
my $300 beater ;)
R.I.P Kayleigh Raposa 12/18/90 - 2/24/07

New and used parts for sale, rare and performance

Reply #16 –
Quote from: Aerobird Motorsports;167579
That's funny Carm! What, do embarrassed for pics? ;)

You want a pic? Here's a pic :hick: I'll either need to drop its butt or install something like 265/70R16 truck tires on the snowflakes to fill those gaping wheel wells...
2015 Mustang GT Premium - 5.0, 6-speed, Guard Green - too much awesome for one car

1988 5.0 Thunderbird :birdsmily: SOLD SEPT 11 2010: TC front clip/hood ♣ Body & paint completed Oct 2007 ♣ 3.55 TC rear end and front brakes ♣ TC interior ♣ CHE rear control arms (adjustable lowers) ♣ 2001 Bullitt springs ♣ Energy suspension poly busings ♣ Kenne Brown subframe connectors ♣ CWE engine mounts ♣ Thundercat sequential turn signals ♣ Explorer overhead console (temp/compass display) ♣ 2.25" off-road dual exhaust ♣ T-5 transmission swap completed Jan 2009 ♣

New and used parts for sale, rare and performance

Reply #17 –
holy hell!! thats all the way down? time for new springs/ or some drag slicks!
RIP 1988 and 1990 Lincoln Mark VII LSC
I welcomed the dark side and currently am driving a 2000 Dodge Durango SLT plus, with a 5.9, Code named project "Night Runner"
Shes black on black, fully loaded, with headers, 180 tstat, e fan, straight exhaust into a cherry bomb vortex ler, full tune up, ported intake and T/B, MSD coil, and round aircleaner.
Mods to come: Fully rebuilt and heavily modded 46RE, and a richmond rachet locker.
my $300 beater ;)
R.I.P Kayleigh Raposa 12/18/90 - 2/24/07

New and used parts for sale, rare and performance

Reply #18 –
Quote from: Thunder Chicken;167439
I'm actually kinda regretting buying my adjustable ones. The arse sits too high now, gotta get some shorter springs :hick:

...and by "too high" I mean "WAY TOO HIGH" - the 225/60R15 tires look like donut spares in the wheel wells now...



After seeing the pic.. is this what my CHE non adjustables will look like?

New and used parts for sale, rare and performance

Reply #19 –
LOL! :hick: That's funny Carm! Time for some shorter Mustang springs ;)

New and used parts for sale, rare and performance

Reply #20 –
Quote from: daboss351;167642
holy hell!! thats all the way down? time for new springs/ or some drag slicks!

That is all the frickin' way down. Stock '87 Turbo Coupe rear springs...

Quote from: 84 Fila;167643
After seeing the pic.. is this what my CHE non adjustables will look like?
No. The adjustables add about an inch (or more, it seems to me) of height for the adjustment mechanism. The non-adjustables should have the car sitting at stock height.
2015 Mustang GT Premium - 5.0, 6-speed, Guard Green - too much awesome for one car

1988 5.0 Thunderbird :birdsmily: SOLD SEPT 11 2010: TC front clip/hood ♣ Body & paint completed Oct 2007 ♣ 3.55 TC rear end and front brakes ♣ TC interior ♣ CHE rear control arms (adjustable lowers) ♣ 2001 Bullitt springs ♣ Energy suspension poly busings ♣ Kenne Brown subframe connectors ♣ CWE engine mounts ♣ Thundercat sequential turn signals ♣ Explorer overhead console (temp/compass display) ♣ 2.25" off-road dual exhaust ♣ T-5 transmission swap completed Jan 2009 ♣

New and used parts for sale, rare and performance

Reply #21 –
what does a 83-84 TC gauge pod look like..... is there a pic around i can check out?... is that rpm, fuel and speedo?  will it work with the aod speedo cable?


OOOH!!!  I'm a Eco Hypermiler :burnout: Not bad for 79mph on the interstate 2hours a day
 

New and used parts for sale, rare and performance

Reply #22 –
It has a tach and speedo and a boost gauge in it. I can snap a pic of the one I am selling.

New and used parts for sale, rare and performance

Reply #23 –
The 83-84 TC cluster should look like a big speedo big tach, gas gauge in the middle. Then it has a green light for Boost and a red light for Overboost.
84 Turbo coupe 2.3T Modded with 88 upper and lower intake, 88 injectors, E6 manifold, T3-4 AR.60 turbo, 31X12X3 FMIC, Homemade MBC , Greddy knock off BPV.
4 eyes see better than 2! 
Da Bird!

FreeBird

New and used parts for sale, rare and performance

Reply #24 –
Quote
The 83-84 TC cluster should look like a big speedo big tach, gas gauge in the middle. Then it has a green light for Boost and a red light for Overboost.

Yep, that's it exactly. Putting that cluster in a non-turbo car will result in the loss of a factory transmission gear indicator, though, since the fuel gauge is where the indicator is in non-turbo clusters.

New and used parts for sale, rare and performance

Reply #25 –
Quote from: EricCoolCats;167743
Yep, that's it exactly. Putting that cluster in a non-turbo car will result in the loss of a factory transmission gear indicator, though, since the fuel gauge is where the indicator is in non-turbo clusters.

no need, i have a floor shifter :)... could i swap it with my cougar digital dash.... i'm sure they'll be some wires to swap, but they'll fit and the speedo will work right?.....  if so, i'll take that pic ;)


OOOH!!!  I'm a Eco Hypermiler :burnout: Not bad for 79mph on the interstate 2hours a day

New and used parts for sale, rare and performance

Reply #26 –
I know the one in my 84 T/c is a cable driven speedo. I think that the end that goes into the speedo are all the same. except the part that holds them onto the speedo.
84 Turbo coupe 2.3T Modded with 88 upper and lower intake, 88 injectors, E6 manifold, T3-4 AR.60 turbo, 31X12X3 FMIC, Homemade MBC , Greddy knock off BPV.
4 eyes see better than 2! 
Da Bird!

FreeBird

New and used parts for sale, rare and performance

Reply #27 –
My speedo cable is melted but still works. If my cluster comes out it's not going back in. I'll opt for the TC cluster when I replace it

New and used parts for sale, rare and performance

Reply #28 –
Quote from: EricCoolCats;167743
Yep, that's it exactly. Putting that cluster in a non-turbo car will result in the loss of a factory transmission gear indicator, though, since the fuel gauge is where the indicator is in non-turbo clusters.


*smacks forehead*
I totally spazzed on that... Stupid Auto... :p

If you take pics of the one your selling, Can you get one of the back for me please?
Want to make sure i put it all back together correctly. :hick:
~Project ThunderStorm = '84 Charcoal Thunderbird - First Car - Long Time Work in Progress~
~Project (No Name Yet) = 1970 Plymouth GTX/RR "Clone"~

New and used parts for sale, rare and performance

Reply #29 –
Mike, do you have an 87-88 T-Bird driver's side quarter panel trim piece? I need a non-TC one with no cracks or chips. Mine has a hole in the front and it's been letting water in, which is one reason why I've got rust there.
[SIGPIC][/SIGPIC]
5.0L Speed density
Explorer intake
'92 Mustang GT cam
GT-40 racing heads
Unequal length headers
Custom-made duals
19# injectors
65mm TB
AFPR
T/C header panel
11" brake upgrade
T/C rear sway bar
Electrical mods: too many to list :D