Skip to main content ↑ ↓
Topic: The "Stinkin Lincoln" is being striped!!! (Read 41476 times) previous topic - next topic

The "Stinkin Lincoln" is being striped!!!

Reply #405 –
Is there some lame music to listen to while we wait?lOL.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

The "Stinkin Lincoln" is being striped!!!

Reply #406 –
nope cause the pics are up haha
RIP 1988 and 1990 Lincoln Mark VII LSC
I welcomed the dark side and currently am driving a 2000 Dodge Durango SLT plus, with a 5.9, Code named project "Night Runner"
Shes black on black, fully loaded, with headers, 180 tstat, e fan, straight exhaust into a cherry bomb vortex ler, full tune up, ported intake and T/B, MSD coil, and round aircleaner.
Mods to come: Fully rebuilt and heavily modded 46RE, and a richmond rachet locker.
my $300 beater ;)
R.I.P Kayleigh Raposa 12/18/90 - 2/24/07

The "Stinkin Lincoln" is being striped!!!

Reply #407 –
Oh O.K.,Nice.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

The "Stinkin Lincoln" is being striped!!!

Reply #408 –
all depends how I like it, and whats gonna be easier! Got to wait a little but no biggy it will happen soon!
next few weeks is all for the car!
RIP 1988 and 1990 Lincoln Mark VII LSC
I welcomed the dark side and currently am driving a 2000 Dodge Durango SLT plus, with a 5.9, Code named project "Night Runner"
Shes black on black, fully loaded, with headers, 180 tstat, e fan, straight exhaust into a cherry bomb vortex ler, full tune up, ported intake and T/B, MSD coil, and round aircleaner.
Mods to come: Fully rebuilt and heavily modded 46RE, and a richmond rachet locker.
my $300 beater ;)
R.I.P Kayleigh Raposa 12/18/90 - 2/24/07

The "Stinkin Lincoln" is being striped!!!

Reply #409 –
I STILL say out the very back.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

The "Stinkin Lincoln" is being striped!!!

Reply #410 –
I say out the back, Looks like its rigged or it didn't work out right so they said "hell with it", and dumped them out the side.

Vinnie's rectangle tips would look killer on that car. (out the back of course) LOL
[SIGPIC][/SIGPIC]
***** Project "EVOLUTION" 1987 Cougar LS  & 1985 Cougar Convertible *****
[/COLOR]
5.0 HO 306 roller block, machined GT-40P heads, Wiseco dished forged pistons, Eagle forged floating I-beam connecting rods, Lunati pushrods, ARP bolts, Scorpion aluminum 1.6 rockers, Comp Cams Magnum 266HR, Explorer intake, 65mm TB, MAF Conversion, 19# injectors, Ford Racing stainless P-headers, 2-1/2" cat-less exhaust w/ Flowtech Afterburner lers , SC AOD with 2800 BDR torque converter, 3.73 T-Lok rear, CHE rear control arms, full 2-1/2" frame w/1" jacking rails & seat supports, Rear disk brakes, Turbine wheels, All original interior w/ floor shift upgrade .......
Pretty much every panel on my 87 is new, rebuilt, or re constructed. :D
Join us on Facebook
http://www.facebook.com/home.php?sk=group_137541156293768&ap=1

The "Stinkin Lincoln" is being striped!!!

Reply #411 –
Yea i think out the back wins.......
no tips
those pipes are enough!
RIP 1988 and 1990 Lincoln Mark VII LSC
I welcomed the dark side and currently am driving a 2000 Dodge Durango SLT plus, with a 5.9, Code named project "Night Runner"
Shes black on black, fully loaded, with headers, 180 tstat, e fan, straight exhaust into a cherry bomb vortex ler, full tune up, ported intake and T/B, MSD coil, and round aircleaner.
Mods to come: Fully rebuilt and heavily modded 46RE, and a richmond rachet locker.
my $300 beater ;)
R.I.P Kayleigh Raposa 12/18/90 - 2/24/07

The "Stinkin Lincoln" is being striped!!!

Reply #412 –
i think you should do stack pipes through the front fenders.
1979 Ford Fairmont
[/B]
5.0L/4R70W/8.8"/5-lug/3" Exhuast

The "Stinkin Lincoln" is being striped!!!

Reply #413 –
zoomies!!
buy the pipe and s and Ill do it
try me
RIP 1988 and 1990 Lincoln Mark VII LSC
I welcomed the dark side and currently am driving a 2000 Dodge Durango SLT plus, with a 5.9, Code named project "Night Runner"
Shes black on black, fully loaded, with headers, 180 tstat, e fan, straight exhaust into a cherry bomb vortex ler, full tune up, ported intake and T/B, MSD coil, and round aircleaner.
Mods to come: Fully rebuilt and heavily modded 46RE, and a richmond rachet locker.
my $300 beater ;)
R.I.P Kayleigh Raposa 12/18/90 - 2/24/07

The "Stinkin Lincoln" is being striped!!!

Reply #414 –
Quote from: 32VFoxBird;224666
i think you should do stack pipes through the front fenders.



oh you devil. maybe go up the roof. follow the roof contours.

The "Stinkin Lincoln" is being striped!!!

Reply #415 –
~Project ThunderStorm = '84 Charcoal Thunderbird - First Car - Long Time Work in Progress~
~Project (No Name Yet) = 1970 Plymouth GTX/RR "Clone"~
 

The "Stinkin Lincoln" is being striped!!!

Reply #416 –
hahahah
tails are getting picked up this week along with the new welded. Then comes the task of seeing how high I can get the back safely to do all this work.
Got to first make mounts for the lers int he factory spot, then cut the flow tubes. then I can throw the full tails I have on, and cut them down to use the full lenght of the chrome pipe. Then its finishing body work, bleeding brakes, and finishing stupid stuff up!
RIP 1988 and 1990 Lincoln Mark VII LSC
I welcomed the dark side and currently am driving a 2000 Dodge Durango SLT plus, with a 5.9, Code named project "Night Runner"
Shes black on black, fully loaded, with headers, 180 tstat, e fan, straight exhaust into a cherry bomb vortex ler, full tune up, ported intake and T/B, MSD coil, and round aircleaner.
Mods to come: Fully rebuilt and heavily modded 46RE, and a richmond rachet locker.
my $300 beater ;)
R.I.P Kayleigh Raposa 12/18/90 - 2/24/07

The "Stinkin Lincoln" is being striped!!!

Reply #417 –
Well when I broke my ignition I figured it was time to do what I wanted to do on this car, put in a start button. So I went out and bought on of those ricer ones on the fake carbon fiber plate withe the button, and a switch.
Im mounting it in my ashtray under the door, and I still want the key to turn the car on, and I want to be able to flip up the switch and press the button to start the car.
Not only will it look cool, but will be somewhat of a theif deturant, along with a kill switch I'm mounting in a special place as well!

gonna look sweet!! Gotta make a frame for it to fit it right down in there to close the door
RIP 1988 and 1990 Lincoln Mark VII LSC
I welcomed the dark side and currently am driving a 2000 Dodge Durango SLT plus, with a 5.9, Code named project "Night Runner"
Shes black on black, fully loaded, with headers, 180 tstat, e fan, straight exhaust into a cherry bomb vortex ler, full tune up, ported intake and T/B, MSD coil, and round aircleaner.
Mods to come: Fully rebuilt and heavily modded 46RE, and a richmond rachet locker.
my $300 beater ;)
R.I.P Kayleigh Raposa 12/18/90 - 2/24/07

The "Stinkin Lincoln" is being striped!!!

Reply #418 –
tail pipes are getting dropped off this week, bought some wire for my mig, and some new cut off wheels so I can do the exhaust myself.
Sent out the money for the 3g alt, IAC, igntion switch matching door locks and keys, and the money for a set of chucks shock adapters.
Getting a fuse for the 3g swap and a new battery this week too, and hopefully a set of tires. Gonna pull the drivers brakes apart and re-torque the rotor, and bleed the brakes. Then the exhaust is gonna be made up, and Ill have to get the tires mounted when I get them. Body work is put off for now till its 100% drivable.
Once its drivable I have to finish the fiberglass work on the drivers rear quarter, finish the metal work on the pass door, and finish the pass wheel well(gonna make it from metal) Then gonna spray down self etching primer, and then a sealer, and something for a top coat. Gonna paint all the trim black and install it then it should be golden for now
RIP 1988 and 1990 Lincoln Mark VII LSC
I welcomed the dark side and currently am driving a 2000 Dodge Durango SLT plus, with a 5.9, Code named project "Night Runner"
Shes black on black, fully loaded, with headers, 180 tstat, e fan, straight exhaust into a cherry bomb vortex ler, full tune up, ported intake and T/B, MSD coil, and round aircleaner.
Mods to come: Fully rebuilt and heavily modded 46RE, and a richmond rachet locker.
my $300 beater ;)
R.I.P Kayleigh Raposa 12/18/90 - 2/24/07

The "Stinkin Lincoln" is being striped!!!

Reply #419 –
got my door locks and igntion switch today
still waiting on the tail pipes
and i just picked up a set of JBA 1 1/2 headers for 100 bucks, adn the kid is pulling the rear end out before the car goes to the yard and im getting the trac lok and 3.73's
RIP 1988 and 1990 Lincoln Mark VII LSC
I welcomed the dark side and currently am driving a 2000 Dodge Durango SLT plus, with a 5.9, Code named project "Night Runner"
Shes black on black, fully loaded, with headers, 180 tstat, e fan, straight exhaust into a cherry bomb vortex ler, full tune up, ported intake and T/B, MSD coil, and round aircleaner.
Mods to come: Fully rebuilt and heavily modded 46RE, and a richmond rachet locker.
my $300 beater ;)
R.I.P Kayleigh Raposa 12/18/90 - 2/24/07