3g install **go directly to post 50 for drawing

Topic: 3g install **go directly to post 50 for drawing (Read 63808 times) previous topic - next topic

3g install **go directly to post 50 for drawing

Reply #60 – July 19, 2011, 05:14:53 PM

......another batch of info I find useful............and yes it's another long read! LOL

http://sbftech.com/index.php/topic,2679.0.html

3g install **go directly to post 50 for drawing

Reply #61 – May 14, 2013, 04:49:57 PM

will update original with better looking drawing to include all the good feedback

3g install **go directly to post 50 for drawing

Reply #62 – May 21, 2013, 06:08:42 PM

ok question, I am gong to put a 3g in, but right now motor is out, but I have been doing the wiring getting things ready, I have the yellow wire that has the fuseable links tied into it, I have not uncovered loom to see the black and orange wire talked about in earlier post, do you have to undue those or will hit hurt just connect the yellow wire with ring terminal to the battery side of solenoid? I was little un clear on that part.

3g install **go directly to post 50 for drawing

Reply #63 – May 25, 2013, 10:10:09 AM

the way you have that worded is confussing me.
if you look at the drawings,, and if your able to save the drawing to a file.. then you can zoom in on the text... and read those embeded instructions..

or press "shift" and then with your mouse wheel you "scroll" in or out.

the drawings show you what you should have before and after,, i owe this thread a better drawing.

ford manual diagram

Reply #64 – June 30, 2013, 11:29:11 AM

I don't know if this will help. Along with the previous directions this should make the job easier. I just hope I don't burn my car down! I'll post the 2.3 diagram up too. Just gimme a minute.

2.3 wiring diagram

Reply #65 – June 30, 2013, 12:37:46 PM

Here's the charge/power distribution diagram for 2.3 turbos. The blurred text on the bottom left hand side is a ground to the engine G212.

3g install **go directly to post 50 for drawing

Reply #66 – July 05, 2013, 10:49:47 AM

there are about 4 variations depending on year to the 2.3 on this wiring diagram,, perhaps only 3 but each one offers a different obsticle.. gotta be careful doing the 3G on the 2.3L.

3g install **go directly to post 50 for drawing

Reply #67 – July 12, 2013, 09:47:21 PM

The diagram came out of an 87 specific tbird/cougar service manual. I hope that will narrow it down a little.

3g install **go directly to post 50 for drawing

Reply #68 – July 27, 2013, 11:09:04 AM

i am using the brackets from a 92 mustang, what 3g alt will fit with that bracket set up?

3g install **go directly to post 50 for drawing

Reply #69 – July 27, 2013, 09:15:04 PM

try not to post in this jerry, its a sticky for reference to the original topic.