Skip to main content ↑ ↓
Topic: i need to know (Read 1170 times) previous topic - next topic

i need to know

what length o2 sensor extension harnesses to buy now that i'm switching from s.o. to h.o. exhaust manifolds?
:cougarsmily:5.0 HO, E303 cam, Exploder/Cobra intake, smog pump delete, Ford Taurus electric fan, MAF conversion, BBK headers, MAC 2.5" off-road exhaust w/x-pipe, AOD w/shift kit, 8.8 Trac-Loc rear w/disc brakes, 5-lug conversion w/'98 Mustang GT 17" wheels, Mach 1 springs:cougarsmily:

i need to know

Reply #1 –
Good question about length.I installed the H.O engine a month ago into the Sport,and did some eyeball measuring and just lengthened my factory harness.It took all of 30 minutes (using solder and heat shrink),and works great.The cost was free.Just a thought.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

i need to know

Reply #2 –
about how long was the wire that was soldered in?
:cougarsmily:5.0 HO, E303 cam, Exploder/Cobra intake, smog pump delete, Ford Taurus electric fan, MAF conversion, BBK headers, MAC 2.5" off-road exhaust w/x-pipe, AOD w/shift kit, 8.8 Trac-Loc rear w/disc brakes, 5-lug conversion w/'98 Mustang GT 17" wheels, Mach 1 springs:cougarsmily:
 

i need to know

Reply #3 –
Just add at least 2 feet. Or make it 3 to be safe. You'll need the extra length to route it away from the header heat and other parts. If there's extra, just make a couple of loops and zip-tie it out of the way.
Death awaits you all with nasty, big, pointy teeth.

1988 5.0 Bird, mostly stock, partly not, now gone to T-Bird heaven.
1990 Volvo 740GL. 114 tire-shredding horsies, baby!