It leaked again. and wont start January 02, 2007, 02:21:47 PM so i got the new gasket and put it one today. went real smooth with the rain and all. wiggled it up there and i put the bolts though the gasket before hand so it was fast and no problems. then i waited and bent the hanger for the pass. side ler. got that done waited alittle longer. started to fill it up and once again it leaked. this time at the rear driver corner instead of the whole back.and to top it off it wont turn over. the starter won't even click.----------------------------------------------------------------------------------------------------------------------Well i did the column to floor conversion (would never recommend it) an hung the duals today. as i was about to put a hanger on the pass. side i figured i'd fill the tranny before i forgot. so i found the flex funnel and started pouring. well as i got to the 9th or 10th qt. the funnel wasbacking up and then i hear some splashing over the radio. Yes when i but the gasket on last night at 1030 in the freezing cold i didnt have it sitting right and i should have known but i was tired and wanted to get it closed up before i went to bed. so off to the parts store for more fluid and a new gasket. any hints tricks to get the pan up there without moving the gasket around? i think i will put the corners in first and work from the middle out to the corners after that.JUST MY LUCK. But you gotta learn somehow------------------------------------------------------------------im doing the column to floor conversion and i have the pan off now what arm do i flip? want to make sure i dont mess it up. Pics?????running out of day light Quote Selected
It leaked again. and wont start Reply #1 – January 02, 2007, 03:28:54 PM running out of daylight................. Quote Selected
It leaked again. and wont start Reply #2 – January 02, 2007, 03:32:23 PM Does this page not make it clear? Quote Selected
It leaked again. and wont start Reply #3 – January 02, 2007, 03:39:33 PM no that is what i was using to get this far. Quote Selected
It leaked again. and wont start Reply #4 – January 02, 2007, 05:03:54 PM The arm you flip is the one that your shifter linkage was hooked to. Quote Selected
It leaked again. and wont start Reply #5 – January 02, 2007, 05:43:51 PM I always love it when people dig into something like this without seeing what needs to be done beforehand...... Quote Selected
It leaked again. and wont start Reply #6 – January 02, 2007, 05:47:48 PM As a rule of thumb bro, if you don't know what to do BEFORE you touch it, you probaly shouldn't work on it. Quote Selected
It leaked again. and wont start Reply #7 – January 02, 2007, 06:18:25 PM Quote from: Chuck W;121306I always love it when people dig into something like this without seeing what needs to be done beforehand......Quote from: 84 Fila;121308As a rule of thumb bro, if you don't know what to do BEFORE you touch it, you probaly shouldn't work on it.i knew what it involved before i started it. im just confused on what to flip. my luck ill flip the wrong arm and it will shift into 1st at 45. doubt that would happen but its just my luck. Quote Selected
It leaked again. and wont start Reply #8 – January 02, 2007, 06:27:55 PM I'll crawl under my car and get a pic of the part you need to flip tomorrow. If you can wait that long, I get home from school about 4-ish. Now mine is a column shift but the part is the same. If you want of course Quote Selected
It leaked again. and wont start Reply #9 – January 02, 2007, 06:51:26 PM Quote from: Tbird232ci;121301The arm you flip is the one that your shifter linkage was hooked to.so i flip the one on the outside of the tranny. but i need to loosen it from the jamnut ( having trouble getting it off) on the inside. what about the inside arms how do they get moved? Erics instruction on CoolCats are good but im not sure which is what if you see what i mean. Quote Selected
It leaked again. and wont start Reply #10 – January 02, 2007, 07:06:59 PM Again, do you want a pic tomorow? Quote Selected
It leaked again. and wont start Reply #11 – January 02, 2007, 07:26:17 PM Quote from: 84 Fila;121331Again, do you want a pic tomorow?yours is column? i still have all of that semi hooked up. but if you can it might help down the road Quote Selected
It leaked again. and wont start Reply #12 – January 02, 2007, 07:27:20 PM I'll try. Any other pics you or anyone else needs while I'm under teh car? Quote Selected
It leaked again. and wont start Reply #13 – January 03, 2007, 10:14:55 AM got it done thanks for the offer. i just couldn't see what was what so i didnt know what to flip Quote Selected
It leaked again. and wont start Reply #14 – January 03, 2007, 02:47:03 PM Ok, thats good to hear. I'd put a pic up here so incase some new guy has the same question he can see it ya know. Quote Selected
Topic: It leaked again. and wont start (Read 4628 times)
previous topic - next topic
