Napa confused me... December 22, 2006, 08:54:12 PM I went to get a new igniton rotor today. Took it off and went to get a new one from napa. Go throught all the questions and tell them that I have a 5.0. They bring me out a rotor for a 5.0. But it doesn't look like mine, at all. It turns out my car takes a V6 rotor on it. Why? It has a V8 TFI in it. It's a TFI distrubiter but why the hell does it have a V6 rotor in it? I know the engine came from an LTD but even on the engine list at napa, it says it's for a V6. Did I mess out on a detail here? Or am I loosing my F'in mind Quote Selected
Napa confused me... Reply #1 – December 22, 2006, 09:46:53 PM the rotors that I've used in the past said 6 & 8 on top of the rotor Quote Selected
Napa confused me... Reply #2 – December 23, 2006, 07:01:18 AM You can't have a V6 cap because it wouldn't have enough terminals on the top. Quote Selected
Napa confused me... Reply #3 – December 23, 2006, 07:32:20 AM I didn't know there was a difference between 6 & 8 rotors, if there even is, but...You can't trust what a parts stores computer says all the time either. I 've had similar situations involving U-joints, sparkplugs, & even hoses just to name a few. Best thing is take the old one with you and try to find the guy behind the counter who doesn't look 12 years old. Quote Selected
Napa confused me... Reply #4 – December 23, 2006, 08:25:26 AM The rotor in my V6 Bird says 6 & 8 on it also. Same rotor. Quote Selected
Napa confused me... Reply #5 – December 23, 2006, 08:50:26 AM I know at the parts store I work at if I look up application by the part number it gives me a very generic desciption of what it is for. Even the illistrated book with pictures give you very py application list. Quote Selected
Napa confused me... Reply #6 – December 23, 2006, 08:59:48 AM Ok, Napa is full of shiznit. I know that my car has a 5.p in it. Sorry for the random rant, it just kinds threw me off alittle bit. Quote Selected
Napa confused me... Reply #7 – December 23, 2006, 05:21:08 PM Just go back and throw a brick through their front window, you'll feel alot better!J.K.! Quote Selected
Napa confused me... Reply #8 – December 23, 2006, 06:43:48 PM You have a 5.0 from an LTD? the only fox body LTD with a 5.0 was the LX, and those were HO's. Quote Selected
Napa confused me... Reply #9 – December 23, 2006, 06:45:54 PM By LTD, he means Crown Vic. Quote Selected
Napa confused me... Reply #10 – December 23, 2006, 07:19:00 PM Quote from: bhazard;119813You have a 5.0 from an LTD? the only fox body LTD with a 5.0 was the LX, and those were HO's.Now thats something I didn't know. AS I was just beginning to learn cars at the point in which the motor was put in it, I'm going by which I was told. 1983 LTD with the 5.0. If it's an HO we'll know when I pull the CFI off and take the screens out over x-mas brake.And I know LTD=Vic. We have the 90' LTD C.V. remember. Quote Selected
Napa confused me... Reply #11 – December 24, 2006, 10:58:36 AM Quote from: Tbird232ci;119770The rotor in my V6 Bird says 6 & 8 on it also. Same rotor.but explain this..............V6=Small cap so the circle has a shorter radiusv8=Large cap so the circle has a longer radiussee v6 rotor sitting off to the sideDo you have a pic of the dizzy with the cap off yet? Quote Selected
Napa confused me... Reply #12 – December 24, 2006, 11:27:50 AM Still lookin for my camara. I'll post a pic of the rotor they gave me though. Quote Selected
Napa confused me... Reply #13 – December 24, 2006, 11:29:08 AM What they gave me and thats fits is like this, only it's grey. Now for the sake of asking, it it possable to run a V6 dizzy with a V8 cap on it? I don't know what the hell to think anymore, so I'll probaly just find another V8 TFI and swap that into the car. Quote Selected
Napa confused me... Reply #14 – December 24, 2006, 12:03:43 PM the V8 has a plastic spacer between the cap and the dizzy. The spacer attaches to the dizzy by two screws. The dizzy cap clips onto the spacer. The cap is less than an inch tall , minus the standoffs.the v6 cap attaches directly to the metal housing of the dizzy by two screws. The v6 cap is about 3'' tall as well. as for the mechanical parts of the dizzy such as the shaft / housing / gear (minus all the electroinics and cap differences),,,,, i believe the oil pump shaft is a smaller in thickness than the v8. That would mean that the center part of the dizzy is not the correct one.id have to look though.See how easy i can count the blades that pass through my pick up module (hull effect)as for your rotor button,,,,, chevyanyone out there have an opinion???????????????stop loosing that camera,,,lol Quote Selected
Topic: Napa confused me... (Read 4668 times)
previous topic - next topic
