Skip to main content ↑ ↓
Topic: Part Needed Fuel Injector (Read 723 times) previous topic - next topic

Part Needed Fuel Injector

Ok I know a lot of people have replaced the EFI with a intake and Carb.. I need a Derby Hat from the bottom of a Grey injector from a 88 or so 5.0 . PM me for my addy and I would appreciate you sticking it in a envelope and sending it my Way ... Thanks.. Finally have more pics posted. getting closer . Hope to do a write up on the entire process..

Part Needed Fuel Injector

Reply #1 –
Those pintle hat's are not necessary.
Broke 2 on my HO when i cleaned the intake and injectors so i went without them,worked fine for 2 years till i pulled them for a swap.

Injector part

Reply #2 –
You can buy the tops and the o-rings at Auto Zone

Part Needed Fuel Injector

Reply #3 –
Ok Thanks ! No one at Advance Auto knew what I was talking about..Pintel Hats, for injevtors..?Well it was on Sunday..lol . I will check it out.. Thanks again. Thanks Bob I got the upper and lower O-rings just fine.

Part Needed Fuel Injector

Reply #4 –
Glad you got what you needed

Part Needed Fuel Injector

Reply #5 –
I rebuilt mine a few months ago with the kit from Oreilly's  I think they were about $3 each

Part Needed Fuel Injector

Reply #6 –
Quote from: 88turbo;117148
I rebuilt mine a few months ago with the kit from Oreilly's  I think they were about $3 each


Ok 88Turbo I will have to Try Napa..They have them for $3.99 ea. injector also  I never heard of Oreily's.. I will look them up..  Ok I find one in Destin Florida.  Thanks Again.

Look in my Webshots for that 5.0 NOW.. wow what a differance.