Merry Christmas to me!

Topic: Merry Christmas to me! (Read 1834 times) previous topic - next topic

Merry Christmas to me!

December 02, 2006, 01:59:39 AM

hehehe, Santa Clause has come early for me!
The upper/lower also includes the injectors, rail, injector harness, egr, TB, t-stat neck, a coupla other misc. pieces.

Merry Christmas to me!

Reply #1 – December 02, 2006, 07:56:00 AM

Right on, man!
I've got an HO cam laying around somewhere...

Merry Christmas to me!

Reply #2 – December 02, 2006, 08:39:50 AM

Hey,congrats !!! Feels good to see parts that will make a difference.I should have the H.O upper,t-body and spacer,and H.O cam on Monday (according to the UPS online tracking) for my Project 'Bird.I already have the computer,injectors,headers,and H-Pipe.The guy said $30.00 for everything.I couldn't turn it down.The bad part,it's December when I'm getting my parts,and too cold to mess with any of it.

Merry Christmas to me!

Reply #3 – December 02, 2006, 11:07:34 AM

Quote from: cougarcragar;116559

Right on, man!
I've got an HO cam laying around somewhere...

Are you gonna use it....? I could be interested, I've not yet gotten a cam.
Later today I'll have pics of my other parts and pieces.

Merry Christmas to me!

Reply #4 – December 02, 2006, 05:06:00 PM

I also have an HO cam, I will be going with something slightly larger, so I dont want mine.

Merry Christmas to me!

Reply #5 – December 02, 2006, 07:28:39 PM

Port that lower before you throw it on.....

Merry Christmas to me!

Reply #6 – December 02, 2006, 08:13:47 PM

Paul, I'd realllly like to...but for now, I just want to get it running, and reliable. I could port it with a dremel, couldn't I?
What attachments would I want to use?
If it is fairly easy, and not terribly time-consuming, I'll do it.
I've heard of it, but as far as doing it..don't have a clue at all how to go about it.

Merry Christmas to me!

Reply #7 – December 02, 2006, 09:02:34 PM

Your dremel would be dead after the second or third port. I used an air die grinder on the 88's lower.. a selection of rasps will do wonders.. But Jegs and Summit sell home porting kits.

Merry Christmas to me!

Reply #8 – December 03, 2006, 01:10:53 AM

i just got an H.O. intake and i want to get it ported and the TB opening bored out.

how much can you port an H.O.

Merry Christmas to me!

Reply #9 – December 03, 2006, 10:22:37 AM

I had my Cobra lower ported by Tom Moss (Tmoss over at the Corral) and he did an outstanding job. Turn around time was only 5 days. I think it was about $140 including all shipping. I figured that by the time I bought all the nessesary stuff to get set up to port I'd already be $50 or $60 into the cost of having someone else do it. He has a great rep over there and I highly recomend his work. Check out his web site for more info:

http://www.tmossporting.com/