flowmaster exaust, 5 lug spindles.

Topic: flowmaster exaust, 5 lug spindles. (Read 1230 times) previous topic - next topic

flowmaster exaust, 5 lug spindles.

October 19, 2006, 12:13:58 PM

hey, if by any chance you might be intersested, ive got the flowmasterslaying around that i took off my mustang. i put a borla stinger cat back on so i have the whole cat back available. the tailpipes are obviously for an sn95 stang but they might wotk. only thing is they were welded together so i cut them at the and they would need to be cleaned up and welded or coupled back together. they have like 20k miles on them. the tips that are on the tail pipes are decent. they are polished (might be chrome) slash cut mach 1 rolled tips.

not looking for much for them, maybe 100 bucks shipped. id rather not get into shipping these though.

sorry, the only pic i have of the moment. ill take some later. your looking at the tip on the right.

SOLD here are the spindles. i bought them off of ebay. they are 96-04 spindles and hubs removed from an 01 cobra. looking for 140 plus shipping for these. SOLD

flowmaster exaust, 5 lug spindles.

Reply #1 – October 19, 2006, 06:27:08 PM

You have PM on the spindles.

flowmaster exaust, 5 lug spindles.

Reply #2 – October 19, 2006, 08:44:13 PM

schweet

flowmaster exaust, 5 lug spindles.

Reply #3 – October 19, 2006, 08:49:32 PM

Will the exhaust *fit* on a fox bird?

flowmaster exaust, 5 lug spindles.

Reply #4 – October 19, 2006, 09:36:22 PM

thats what im not sure of. my car is a 2000 GT and the tail pipes are the stockers of that. they look like stainless though. the lers and tips can deffinetly be used. the tail pipes look like they may work but i dont have anything to compare them to anymore. ill post pics of them tomorow anyway.

flowmaster exaust, 5 lug spindles.

Reply #5 – October 19, 2006, 09:41:52 PM

Thanks. Hope the work out for someone. Should look cool anyways

flowmaster exaust, 5 lug spindles.

Reply #6 – October 19, 2006, 10:58:00 PM

Quote from: 84 Fila;109177

Will the exhaust *fit* on a fox bird?

obviously they will have to be lengthened.

flowmaster exaust, 5 lug spindles.

Reply #7 – October 19, 2006, 11:00:29 PM

In the mid pipe and the tails right?

flowmaster exaust, 5 lug spindles.

Reply #8 – October 19, 2006, 11:32:05 PM

yeah, they would be pretty much like useing fox stang stuff. im just not sure how the bends are different, if they are different at all.

fwiw, i cut the lers off right after the lers, i think you could add the length there if you needed to. you would have to sepperate the tips and add length just before them in order to make it past the bumper. this is what i did to my tbird anyway.

im basically selling them as the lers and tips but the flowtubes and tail pipes are included, unless you wanted me to cut them off to save on shipping. seems ford used much better steel in the later cars.

also, the tips are bigger than they look. i have to measure them when i take pics. the borlas on the left are huge so they make the mach 1 tips look little. this is the only pic i can find right now of them still installed together.

flowmaster exaust, 5 lug spindles.

Reply #9 – October 20, 2006, 08:50:54 AM

thanks guys. the spindles are sold!

flowmaster exaust, 5 lug spindles.

Reply #10 – October 21, 2006, 06:37:00 PM

alright, the weather was a little nasty the other day so i couldnt get out. here are the pics. again, about 20k on them. the lers ant tips were welded into the stock mustang pipes. the OD on the stock pipes is 2" while the OD on the tips is 3". the flowmasters themselves are for 2 1/4. they were welded together so i had to gut the tailpipes off of them. they could be cleaned up and re-welded or whatever. tips look good. they could easily be polished right up.

in all honestly, they sounded beter than the borla stingers i have now.

flowmaster exaust, 5 lug spindles.

Reply #11 – October 21, 2006, 08:34:28 PM

Hmmm... the length of those tailpipe look better suited for our cars than the Fox's. The flow tubes on the lers look longer too. I hope someone on here buys them so we can get a update. :)

flowmaster exaust, 5 lug spindles.

Reply #12 – October 21, 2006, 11:52:10 PM

If I could pay for the shipping, I would love to be a test rat. Dare I ask how much to 44408?

flowmaster exaust, 5 lug spindles.

Reply #13 – October 22, 2006, 12:32:02 AM

ill see what i can get for packageing and get back to you. ill have to make a box of some sort. its gonna be a good 30 bucks i bet....

flowmaster exaust, 5 lug spindles.

Reply #14 – October 22, 2006, 09:38:15 AM

I'll shot a maybe on me gettig it. I need to do a few other things first, like get the cash. Restrants don't pay that much when you have a project car.