Skip to main content
Topic: chassis paint suggestions (Read 1121 times) previous topic - next topic

chassis paint suggestions

getting ready to repair and paint the front end and undercarriage of my 86 tcoupe, any suggestions on primer and paint, was thinking about bill hirsch, I will be welding in a couple new pieces and blasting the rest.

chassis paint suggestions

Reply #1
I used duplacolor engine paint w/ceramic (new ford gray) on the under side of my capri! It looks good and its durable.t

chassis paint suggestions

Reply #2
Epoxy primer and Urethane paint..... can't really beat that combo
[SIGPIC][/SIGPIC]
***** Project "EVOLUTION" 1987 Cougar LS  & 1985 Cougar Convertible *****
[/COLOR]
5.0 HO 306 roller block, machined GT-40P heads, Wiseco dished forged pistons, Eagle forged floating I-beam connecting rods, Lunati pushrods, ARP bolts, Scorpion aluminum 1.6 rockers, Comp Cams Magnum 266HR, Explorer intake, 65mm TB, MAF Conversion, 19# injectors, Ford Racing stainless P-headers, 2-1/2" cat-less exhaust w/ Flowtech Afterburner lers , SC AOD with 2800 BDR torque converter, 3.73 T-Lok rear, CHE rear control arms, full 2-1/2" frame w/1" jacking rails & seat supports, Rear disk brakes, Turbine wheels, All original interior w/ floor shift upgrade .......
Pretty much every panel on my 87 is new, rebuilt, or re constructed. :D
Join us on Facebook

chassis paint suggestions

Reply #3
i 2nd that ^ im a painter body man by trade and i will spend as long as i need to sand down the frame prime and paint it.
I'm the forum asshole, put on your big boy pants and deal with it.  :flip:

chassis paint suggestions

Reply #4
my time is limited between my son, house and work it doesn't leave me alot of spare time,  I was thinking about applying with a brush since i don't have the best facility for spraying thats why i was thinking hirsch paint seeing you can apply it with a foam brush, this won't be a show car so i'm looking for the best cost to time ratio as possible. thanks

chassis paint suggestions

Reply #5
Use a fine nap or foam roller to do most of it...I painted the underside of mine with a roller

this is all roller finished
[SIGPIC][/SIGPIC]
***** Project "EVOLUTION" 1987 Cougar LS  & 1985 Cougar Convertible *****
[/COLOR]
5.0 HO 306 roller block, machined GT-40P heads, Wiseco dished forged pistons, Eagle forged floating I-beam connecting rods, Lunati pushrods, ARP bolts, Scorpion aluminum 1.6 rockers, Comp Cams Magnum 266HR, Explorer intake, 65mm TB, MAF Conversion, 19# injectors, Ford Racing stainless P-headers, 2-1/2" cat-less exhaust w/ Flowtech Afterburner lers , SC AOD with 2800 BDR torque converter, 3.73 T-Lok rear, CHE rear control arms, full 2-1/2" frame w/1" jacking rails & seat supports, Rear disk brakes, Turbine wheels, All original interior w/ floor shift upgrade .......
Pretty much every panel on my 87 is new, rebuilt, or re constructed. :D
Join us on Facebook

chassis paint suggestions

Reply #6
That looks great what exactly did you use

 

chassis paint suggestions

Reply #7
http://autobodystore.net/Merchant2/merchant.mvc?Screen=PROD&Product_Code=3ZRG&Category_Code=RCAC

I sprayed the engine bay with urethane to match the car though
[SIGPIC][/SIGPIC]
***** Project "EVOLUTION" 1987 Cougar LS  & 1985 Cougar Convertible *****
[/COLOR]
5.0 HO 306 roller block, machined GT-40P heads, Wiseco dished forged pistons, Eagle forged floating I-beam connecting rods, Lunati pushrods, ARP bolts, Scorpion aluminum 1.6 rockers, Comp Cams Magnum 266HR, Explorer intake, 65mm TB, MAF Conversion, 19# injectors, Ford Racing stainless P-headers, 2-1/2" cat-less exhaust w/ Flowtech Afterburner lers , SC AOD with 2800 BDR torque converter, 3.73 T-Lok rear, CHE rear control arms, full 2-1/2" frame w/1" jacking rails & seat supports, Rear disk brakes, Turbine wheels, All original interior w/ floor shift upgrade .......
Pretty much every panel on my 87 is new, rebuilt, or re constructed. :D
Join us on Facebook