Skip to main content ↑ ↓
Topic: mustang engines? (Read 1825 times) previous topic - next topic

mustang engines?

Reply #15 –
OR,just swap in the H.O from a Stang or Mark VII.All you have to do is drop it in and swap the exhaust (if you want) and computer.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..
 

mustang engines?

Reply #16 –
well, i was hoping to get a 85 capri motor ( probably cheaper then a mustang motor) i read a artical in my mustang and fast ford mag where they put AFR 165 heads on and a lunati cam with .525 lift but im not sure if it is a roller block though.
my plan is to  make around 350 engine horse power.
why are non roller blocks fowned on anyways?
1988 LX coupe. a dressed up motor with full exhaust and BBK shorties with flowmasters, BBK CAI, accufab 65mm tb, HO upper intake, cobra valve covers.