Skip to main content ↑ ↓
Topic: 9/32nds! WTF! (Read 835 times) previous topic - next topic

9/32nds! WTF!

FINALLY I got around to changing out the blower motor in my car.....It's going along easy enough.  Remove glove box, motor for air circulation door, support brace etc..... and then I start to take off the air inlet duct which has 5 screws  FOUR OF THEM ARE 5/16"  Guess which one aint?  That would be the one where there in no room to stick a socket or adjustable wrench.....I need a 9/32nds wrench or ratcheting wrench to get to it.  The wife is at the store noe and I just called her to spin by Home Depot to see if they got one or not.
-- 05 Mustang GT-Whipplecharged !!
--87 5.0 Trick Flow Heads & Intake - Custom Cam - Many other goodies...3100Lbs...Low12's!

9/32nds! WTF!

Reply #1 –
If she can't find 9/32, a 7mm will work. 9/32 or 7mm are actually very common screw sizes in car dashes...
2015 Mustang GT Premium - 5.0, 6-speed, Guard Green - too much awesome for one car

1988 5.0 Thunderbird :birdsmily: SOLD SEPT 11 2010: TC front clip/hood ♣ Body & paint completed Oct 2007 ♣ 3.55 TC rear end and front brakes ♣ TC interior ♣ CHE rear control arms (adjustable lowers) ♣ 2001 Bullitt springs ♣ Energy suspension poly busings ♣ Kenne Brown subframe connectors ♣ CWE engine mounts ♣ Thundercat sequential turn signals ♣ Explorer overhead console (temp/compass display) ♣ 2.25" off-road dual exhaust ♣ T-5 transmission swap completed Jan 2009 ♣

9/32nds! WTF!

Reply #2 –
She actually just called and found some ratchet wrenches with 7/32 and 9/32.  These will be my first Husky tools.  I had PLENTY of sockets in those sizes, but they aint gonna cut it
-- 05 Mustang GT-Whipplecharged !!
--87 5.0 Trick Flow Heads & Intake - Custom Cam - Many other goodies...3100Lbs...Low12's!