Skip to main content ↑ ↓
Topic: What I didto my GT40 intake today...... (Read 8027 times) previous topic - next topic

What I didto my GT40 intake today......

Reply #45 –
Quote from: vinnietbird;347447
Coming soon to a thread near you. I's raining way too much right now.

 
I hope this doesnt take 82 pages before we see that intake get installed!!! LOL

Mr. Bill

What I didto my GT40 intake today......

Reply #46 –
Guess what??? I'm taking the pic and posting in a couple of minutes. How's that?

NO,it won't take 82 pages.LOL.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

What I didto my GT40 intake today......

Reply #47 –
Here's the "installed" pic. Super cold and rainy yesterday....sunny today and in the 60's. Good ol' Oklahoma.LOL.

'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

What I didto my GT40 intake today......

Reply #48 –
That looks friggin' sweet. The FPV badge is awesome, nice work. Your engine bay is so tidy.....where are all the wires???? lol
FOXLESS!!

1994 Lincoln Mark VIII

What I didto my GT40 intake today......

Reply #49 –
The wires? They're frigging' everywhere Ford put them. I haven't moved anything. It'll look a lot better when I have a nice day,some time,and some motivation.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

What I didto my GT40 intake today......

Reply #50 –
That looks really Good Vinnie .
Fox-less at the moment

What I didto my GT40 intake today......

Reply #51 –
Thanks a lot. I did the best I could for free.LOL.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

What I didto my GT40 intake today......

Reply #52 –
It turned out real nice Vinnie. The only thing I'm not real sure of is why you painted your strut tower brace red? I think something more suttle like a dark grey or have it be the same color as the car would look better. It just looks out of place to me. Please don't take any offence because you know I think your car is sweet, it's just my 2 cents.

What I didto my GT40 intake today......

Reply #53 –
The red is great.... Ya gotta have a little porno red on these cars....
[SIGPIC][/SIGPIC]
***** Project "EVOLUTION" 1987 Cougar LS  & 1985 Cougar Convertible *****
[/COLOR]
5.0 HO 306 roller block, machined GT-40P heads, Wiseco dished forged pistons, Eagle forged floating I-beam connecting rods, Lunati pushrods, ARP bolts, Scorpion aluminum 1.6 rockers, Comp Cams Magnum 266HR, Explorer intake, 65mm TB, MAF Conversion, 19# injectors, Ford Racing stainless P-headers, 2-1/2" cat-less exhaust w/ Flowtech Afterburner lers , SC AOD with 2800 BDR torque converter, 3.73 T-Lok rear, CHE rear control arms, full 2-1/2" frame w/1" jacking rails & seat supports, Rear disk brakes, Turbine wheels, All original interior w/ floor shift upgrade .......
Pretty much every panel on my 87 is new, rebuilt, or re constructed. :D
Join us on Facebook
http://www.facebook.com/home.php?sk=group_137541156293768&ap=1

What I didto my GT40 intake today......

Reply #54 –
It's a frame for the intake. Also,I actually had thought about black or gray,but wanted something a little different. It does grab the attention,and then puts your eyes right in the middle of the engine.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

What I didto my GT40 intake today......

Reply #55 –
Quote from: vinnietbird;347559
The wires? They're frigging' everywhere Ford put them. I haven't moved anything. It'll look a lot better when I have a nice day,some time,and some motivation.

 
It looks a million times better than mine, I have wires and wires and wires everywhere, they all stick out like a sore thumb.  You've done an excellent job with that car and it keeps getting better.


Here's my disaster - (don't mean to clutter up your thread, my bad pics only make your's look better...lol) Now you see where I'm coming from



FOXLESS!!

1994 Lincoln Mark VIII

What I didto my GT40 intake today......

Reply #56 –
Quote from: vinnietbird;347584
It's a frame for the intake. Also,I actually had thought about black or gray,but wanted something a little different. It does grab the attention,and then puts your eyes right in the middle of the engine.

 
This is true it does do that. The intake would grab your attention either way though. It really does look great!!

What I didto my GT40 intake today......

Reply #57 –
Quote from: 20thanniver-ls;347585
It looks a million times better than mine, I have wires and wires and wires everywhere, they all stick out like a sore thumb.  You've done an excellent job with that car and it keeps getting better.


Here's my disaster - (don't mean to clutter up your thread, my bad pics only make your's look better...lol) Now you see where I'm coming from




No worries,jump right in. I did away with all of my smog equipment,and the Mark VII probably has harnesses my Sport doesn't. I had thought about hiding wires,but realistically,with a daily driver,I'd like to keep access to everything as a "just in case" without having to pull wheels and inner fenders to get to hidden harnesses in order to clean up under the hood.I don't mind some wires.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

What I didto my GT40 intake today......

Reply #58 –
Quote from: vinnietbird;347552
Here's the "installed" pic. Super cold and rainy yesterday....sunny today and in the 60's. Good ol' Oklahoma.LOL.


 

Looks great. As long as you run the wires where Ford had them and keep them in looms they aren't that noticeable. I don't even really notice all the wires under my hood because they are all where Ford put them and in the factory looms.

Quote from: 20thanniver-ls;347585
It looks a million times better than mine, I have wires and wires and wires everywhere, they all stick out like a sore thumb.  You've done an excellent job with that car and it keeps getting better.


Here's my disaster - (don't mean to clutter up your thread, my bad pics only make your's look better...lol) Now you see where I'm coming from





You've got a Mark VII with a bunch more wires than a T-bird or Cougar ever had;)
88 Thunderbird LX: 306, Edelbrock Performer heads, Comp 266HR cam, Edelbrock Performer RPM intake, bunch of other stuff.

What I didto my GT40 intake today......

Reply #59 –
Quote from: 1Bad88tbird;347589
This is true it does do that. The intake would grab your attention either way though. It really does look great!!

Hey,no offense at all about the color swap idea. I'll take any feedback you guys have to give about the Sport. Some things do NOT work (parts,colors,emblems,etc). I enjoy hearing it all. I have tossed around the idea of changing the color,but I'm still unsure.If I did change it,I'd probably go with gloss black. That is a big "IF". For now,red is it. Before I painted it red,I put a lot of thought into it. I usually don't rush into color decisions,or anything on the Sport for that matter. I take some time and think so I don't end up regretting it the next day. I usually take a week to make up my mind.....unless it's an idea I've had for some time....like the intake. I did decide...for now...not to remove the fins and give the FPV badge a place to be recessed. I may still do that,but later on. For now,I'm very happy with the look,and it's mine.

Again,thanks for the comments....keep them coming.If you think something doesn't belong, or looks "out of place",lay it on me.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..