Skip to main content ↑ ↓
Topic: New guy...sort of (Read 2384 times) previous topic - next topic

New guy...sort of

Been here awhile just lurking. Had plans in 06 to get into a Bird but the wife had some health issues and that got sidelined. Well, all is better now and I'm bringing my 88 home tomorrow ! I hope she's fast !!
306 roller block, flat tops, ARP rods and bolts, Compcam 533 lift/ 270 duration, roller rockers, ported 351w heads with 1.94 - 1.60 valves, 550 springs, 600cfm carb (seems small to me), full length headers, 2.5" dual X-pipe exhaust, MSD ignition, Hughes built C4, Weld Draglites front and rear.  :burnout:
Stay tuned for pics and details.
88 Sport ,306 roller block, flat tops, ARP rods and bolts, Compcam 533 lift/ 270 duration, roller rockers, ported 351w heads with 1.94 - 1.60 valves, 550 springs, 600cfm carb , full length headers, 2.5" dual X-pipe exhaust, MSD ignition, Hughes built C4, Weld Draglites, Tracloc /Richmond 3:73's

New guy...sort of

Reply #1 –
Welcome! can't wait to see the pics!
John

New guy...sort of

Reply #2 –
Thanks hcor.
 Thought I might add, the PO left the 7.5 rear but installed a Ford racing Trac-Loc with 3.73s. I'm interested in everyone's thoughts on the entire combo.
88 Sport ,306 roller block, flat tops, ARP rods and bolts, Compcam 533 lift/ 270 duration, roller rockers, ported 351w heads with 1.94 - 1.60 valves, 550 springs, 600cfm carb , full length headers, 2.5" dual X-pipe exhaust, MSD ignition, Hughes built C4, Weld Draglites, Tracloc /Richmond 3:73's

New guy...sort of

Reply #3 –
Welcome. Sounds like a fun car.One way to find out.Push the skinny pedal on the right all the way down.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

New guy...sort of

Reply #4 –
Welcome,,
LOL.... All I saw was a bunch of #s in your post. Not sure what it all means myself, seeing I'm more a body guy then a motor guy :D. I'd love to see pics of it though,
[SIGPIC][/SIGPIC]
***** Project "EVOLUTION" 1987 Cougar LS  & 1985 Cougar Convertible *****
[/COLOR]
5.0 HO 306 roller block, machined GT-40P heads, Wiseco dished forged pistons, Eagle forged floating I-beam connecting rods, Lunati pushrods, ARP bolts, Scorpion aluminum 1.6 rockers, Comp Cams Magnum 266HR, Explorer intake, 65mm TB, MAF Conversion, 19# injectors, Ford Racing stainless P-headers, 2-1/2" cat-less exhaust w/ Flowtech Afterburner lers , SC AOD with 2800 BDR torque converter, 3.73 T-Lok rear, CHE rear control arms, full 2-1/2" frame w/1" jacking rails & seat supports, Rear disk brakes, Turbine wheels, All original interior w/ floor shift upgrade .......
Pretty much every panel on my 87 is new, rebuilt, or re constructed. :D
Join us on Facebook
http://www.facebook.com/home.php?sk=group_137541156293768&ap=1

New guy...sort of

Reply #5 –
it sure sounds fast ... what color you got??
eddie

my rides well some of them work:hick:

1995 towncar in black 246 K non running
1989 continental 110K waiting for a part
1984 cougar head gaskets done almost ready!
Yikes the daily ride ...1998 chevy lumina:hick:

New guy...sort of

Reply #6 –
Quote from: blackcat85;308436
it sure sounds fast ... what color you got??


Originally a bergundy but now primer, ready for paint.
88 Sport ,306 roller block, flat tops, ARP rods and bolts, Compcam 533 lift/ 270 duration, roller rockers, ported 351w heads with 1.94 - 1.60 valves, 550 springs, 600cfm carb , full length headers, 2.5" dual X-pipe exhaust, MSD ignition, Hughes built C4, Weld Draglites, Tracloc /Richmond 3:73's

New guy...sort of

Reply #7 –
Run the 7.5 until it comes apart then upgrade to an 8.8 You'll be fine for awhile if it was assembles correctly.
John

Here's some pics...

Reply #8 –
Picked it up today. Both bumpers already painted. Body is rust free and straight. Half- assed primer job but at least it's not rattle canned. Nice and lopey with good response.
88 Sport ,306 roller block, flat tops, ARP rods and bolts, Compcam 533 lift/ 270 duration, roller rockers, ported 351w heads with 1.94 - 1.60 valves, 550 springs, 600cfm carb , full length headers, 2.5" dual X-pipe exhaust, MSD ignition, Hughes built C4, Weld Draglites, Tracloc /Richmond 3:73's

New guy...sort of

Reply #9 –
more
88 Sport ,306 roller block, flat tops, ARP rods and bolts, Compcam 533 lift/ 270 duration, roller rockers, ported 351w heads with 1.94 - 1.60 valves, 550 springs, 600cfm carb , full length headers, 2.5" dual X-pipe exhaust, MSD ignition, Hughes built C4, Weld Draglites, Tracloc /Richmond 3:73's

New guy...sort of

Reply #10 –
Do you need any parts?
John

New guy...sort of

Reply #11 –
Yep, need a good crack free passenger side tail light.
88 Sport ,306 roller block, flat tops, ARP rods and bolts, Compcam 533 lift/ 270 duration, roller rockers, ported 351w heads with 1.94 - 1.60 valves, 550 springs, 600cfm carb , full length headers, 2.5" dual X-pipe exhaust, MSD ignition, Hughes built C4, Weld Draglites, Tracloc /Richmond 3:73's

New guy...sort of

Reply #13 –
I've got the tail light.Look for my thread in the "for sale" section of the classifieds.These tail lights are getting hard to find in nice shape.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

New guy...sort of

Reply #14 –
I try to pick up any good taillight I can find for the 87/88 Birds.
88 TC 5speed, 168000+ miles, stock 2.3T long block, ported RFE6 exhaust, Evergreen T3 running 15#'s.
Up next: FMIC, fresh air intake, ported intakes, ported big valve head.