Skip to main content ↑ ↓
Topic: Parts need to go ..... (Read 4344 times) previous topic - next topic

Parts need to go .....

Reply #30 –
The backs of the wheels are dirty.The tires are good.I still haven't obligated myself to sell them just yet.I'm waiting for a response about different wheels.It was more or less a feller until I have word from the wheel people.I still have two 16 inch Rikens in the garage with just a couple of hundred miles on them....if that.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

Parts need to go .....

Reply #31 –
Quote
Australian Ford Falcon twist locks (Genuine Ford parts !!!).These are very similar to the '71 Mach 1 Mustang twist locks.Instaed of pins,these are "push and twist".All hardware included,never used,new.This kit comes with the inner and outer cups,aluminum twist locks,springs,and everything else needed for install........$60.00 shipped


Vinnie, for the love of GOD, tell me you still have these!  I'll take them!!!!!  PM ME!!!
-- 05 Mustang GT-Whipplecharged !!
--87 5.0 Trick Flow Heads & Intake - Custom Cam - Many other goodies...3100Lbs...Low12's!

Parts need to go .....

Reply #32 –
Actually Demon,I do still have them.Another member fell through on the deal for them.Let me give you a little more info on them....They are a complete kit.They come with the aluminum twist locks,outer cups that they fit in,inner cups that sandwiches the hood to the outer cups,all of the hardware,underhood brackets that the twist locks lock in to.I wanted to use them so bad,but after I painted the car,I just couldn't do it.The place in Australia that I bought them from (a resto place for old falcons,etc.),sent a pic of the install breakdown.Simple pic,but easy to understand and straight forward.Any questions?
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

Parts need to go .....

Reply #33 –
Oh,one more thing,the twist locks are brushed,not chrome.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

Parts need to go .....

Reply #34 –
More added to the "stuff" list.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

Parts need to go .....

Reply #35 –
I'm backing off on the wheels, I like mine the way they are.
Crome is to much for my ride!
Old Grey Cat to this.88 Cat, 5.0 HO, CW mounts, mass air, CI custom cam, afr165's, Tmoss worked cobra intake, BBK shorty's,off road h pipe, magnaflow ex. T-5,spec stage 2 clutch, 8.8 373 TC trac loc, che ajustables with bullits on the rear. 11" brakes up front. +

Parts need to go .....

Reply #36 –
Vin, payment sent.  Can you post up that pic?  It will be helpful.
-- 05 Mustang GT-Whipplecharged !!
--87 5.0 Trick Flow Heads & Intake - Custom Cam - Many other goodies...3100Lbs...Low12's!

Parts need to go .....

Reply #37 –
I don't have a pic,Paul,BUT,I'll snap one tomorrow after work with all of the pieces laid out for your viewing pleasure.

Kitz,no worries.It appears I may be keeping them for a while,and just installing 275's out back.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

Parts need to go .....

Reply #38 –
Vin, got any more inner dew wipes? how much to 27127?

Thanks, Joe
88 sport,TW heads, comp xe270hr, cobra u/Tmoss ported lower, 65 mm throttle body, under drives,smog delete,
1.7 roller rockers, cai, k&n, bbk adj regulator, 76mm Pro-m,all MSD ign. MSD dist,18° base timing, 3g alt.1 5/8 ceramic headers, 255lph walbro, 2.5" h-pipe, flowmasters, silverfox valvebody, 3.73 gear,
http://i216.photobucket.com/albums/cc154/flipnbird/DSCF0185.jpg ( RIP : ( )

Parts need to go .....

Reply #39 –
Quote from: flipnbird;256043
Vin, got any more inner dew wipes? how much to 27127?

Thanks, Joe


I have about 4 pairs left I believe.EXCELLENT shape.How about $35.00 shipped.I'll be shipping again Wednesday and Friday.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

Parts need to go .....

Reply #40 –
Demon,pics coming as soon as I can.Huge things happening here.

More stuff added everyone......
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

Re: dew wipes

Reply #41 –
vinnie-need a pair of inner dew wipes {beltline}- in perfect condition-p.s.-any installing tips for inner beltlne-thanks salrock54

Parts need to go .....

Reply #42 –
No special tips,just re-install the opposite way they come off.I may have access to a really nice pair of dew wipes.I'll let you know.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

Parts need to go .....

Reply #43 –
Vin, payment sent......................
88 sport,TW heads, comp xe270hr, cobra u/Tmoss ported lower, 65 mm throttle body, under drives,smog delete,
1.7 roller rockers, cai, k&n, bbk adj regulator, 76mm Pro-m,all MSD ign. MSD dist,18° base timing, 3g alt.1 5/8 ceramic headers, 255lph walbro, 2.5" h-pipe, flowmasters, silverfox valvebody, 3.73 gear,
http://i216.photobucket.com/albums/cc154/flipnbird/DSCF0185.jpg ( RIP : ( )

Parts need to go .....

Reply #44 –
still have rear bushing and they are oval or round upper-on-frame ones