Skip to main content ↑ ↓
Topic: In progress Sport pics.... (Read 41145 times) previous topic - next topic

In progress Sport pics....

Reply #240 –
Sorry,but the pics are very limited.Seems the old digi camera I use is ping out,so,I'll start using the new one tomorrow.I installed the black trim on the doors,new 1/4 windows,c-pillar emblems,2005 Thunderbird script on the trunk lid,and the '04 Mach 1 chin spoiler.I still have to re-paint the trim between the door and 1/4 windows,and more,but,it's a start.I'll take more pics tomorrow.............

Before.....


After.....
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

In progress Sport pics....

Reply #241 –
Vinnie, You are now ready for take off you've earned your wings so go soar like a Bird. Ha Ha !!! ;)

In progress Sport pics....

Reply #242 –
The chrome trim I removed had a few rivets holding it on.I popped them off with a sharp screwdriver and a hammer,then re-drilled holes and used small self tapping screws.Worked great.The process of swapping the entire chrome door trim from chrome to black took about 45 minutes (my door panels are already off for other work).No big deal really.The Mach 1 chin sopoiler looks awesome,and was pretty straight forward to install.It came in a huge flat box and had fasteners with it.I didn't use them.I used nuts,washers and bolts.I used twelve fasteners to attach it to the car.The ends had to be trimmed because the spoiler is too long at the wheel openings.The ol' Dremmel and cutoff wheel took care of that in seconds after I marked the material to be moved with a Sharpie marker.WAY better than the little factory piece.The 1/4 windows also were easy.Remove the interior c-pillar panel,remove the window nuts,remove the window,remove the sealant left behind (it just peeled right off),add new sealant,install the window into it's new home,re-install the nuts and interior,done.Good progress today.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

In progress Sport pics....

Reply #243 –
The Bird will be down tomorrow.I may replace the u-joints and paint the bumper and window trim if it's warm.Otherwise,TV all day,and rest before work on Monday.

I very well may install my '04 Bullitt gas lid as well.It was painted to match the car,and I bought black fasteners for it.Nice.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

In progress Sport pics....

Reply #244 –
Couple of more.........

2005 Thunderbird script on that good lookin' back end....


2004 Bullitt gas lid...
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

In progress Sport pics....

Reply #245 –
Nice mouldings, I like the script on it too
[SIGPIC][/SIGPIC]
***** Project "EVOLUTION" 1987 Cougar LS  & 1985 Cougar Convertible *****
[/COLOR]
5.0 HO 306 roller block, machined GT-40P heads, Wiseco dished forged pistons, Eagle forged floating I-beam connecting rods, Lunati pushrods, ARP bolts, Scorpion aluminum 1.6 rockers, Comp Cams Magnum 266HR, Explorer intake, 65mm TB, MAF Conversion, 19# injectors, Ford Racing stainless P-headers, 2-1/2" cat-less exhaust w/ Flowtech Afterburner lers , SC AOD with 2800 BDR torque converter, 3.73 T-Lok rear, CHE rear control arms, full 2-1/2" frame w/1" jacking rails & seat supports, Rear disk brakes, Turbine wheels, All original interior w/ floor shift upgrade .......
Pretty much every panel on my 87 is new, rebuilt, or re constructed. :D
Join us on Facebook
http://www.facebook.com/home.php?sk=group_137541156293768&ap=1

In progress Sport pics....

Reply #246 –
Hopefully today I can get a little more done.If not,I'm still happy I got to something yesterday after a week of having the Sport home from paint.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

In progress Sport pics....

Reply #248 –
Thanks a lot.A pretty banner shot should be coming soon,within the next week or so.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

In progress Sport pics....

Reply #249 –
I like the fuel door!
'88 'bird, 10.9:1 306 w/TFS top end, forged rods/pistons, T-5 swap & bunch of other stuff, 1-family owned, had it since ‘98, 5.0tbrd88 on Instagram and YouTube

In progress Sport pics....

Reply #250 –
I like it too.It was natural polished aluminum on my blue Thunderbird.Looking back at pictures,it looked like a big silver spot on the side,which is why I decided to have it painted body color.If I'm lucky,it'll be on the Sport before supper today.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

In progress Sport pics....

Reply #251 –
I wish I had my car back so I could be working on it!  Its a little empty out in the garage right now. ):
'88 'bird, 10.9:1 306 w/TFS top end, forged rods/pistons, T-5 swap & bunch of other stuff, 1-family owned, had it since ‘98, 5.0tbrd88 on Instagram and YouTube

In progress Sport pics....

Reply #252 –
I wish my car would fit in our garage.LOL.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

In progress Sport pics....

Reply #253 –
I wish my car could roll OUT of the garage! lol
1987 TC

In progress Sport pics....

Reply #254 –
Quote from: HAVI;249096
I wish my car could roll OUT of the garage! lol


You win.LOL.At least I can drive mine.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..