Skip to main content ↑ ↓
Topic: need a shaker scoop (Read 2962 times) previous topic - next topic

need a shaker scoop

this may be a dumb question, but where can i find a shaker scoop to fit my 95 cougar?
It's always fun until someone loses an eye. then it's fun ya can't see.

-James Hetfield back when metallica was still making good music.

need a shaker scoop

Reply #1 –
No one makes one.
88 Thunderbird LX: 306, Edelbrock Performer heads, Comp 266HR cam, Edelbrock Performer RPM intake, bunch of other stuff.

need a shaker scoop

Reply #2 –
yep. that will have to be custom. shouldnt be terribly difficult though. love the shaker. buy the center section of a mach 1 hood and the shaker setup. make some brackets to mount the shaker plenum. find a fiberglass hood for your car and patch in the fiberglass mach 1 hood center.
:america: 1988 Thunderbird Sport, Former 4.6 DOHC T56 conversion project.

Rest of the country, Welcome to Massachusettes. Enjoy your stay.

 
Halfbreed... Mango Orange Y2K Mustang GT
FRPP complete 2000 Cobra engine swap, T56 n' junk...
~John~

need a shaker scoop

Reply #3 –
I have the answer you need.On Ebay Australia,there are shaker assemblies,they are $447.00 U.S. for the setup with the "buy it now".It seems like a lot,but,compared to what the shaker hood scoop setup for a Fox Stang setup costs (about $800.00),it's not so bad.I'll try to find an item number for you.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

need a shaker scoop

Reply #4 –
O.K.,check these two item numbers out......

110222047587
300196524639

Awesome stuff !!!!!!!
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

need a shaker scoop

Reply #5 –
ALMOST what i'm looking for. it's a good scoop, but the air tube is all wrong. with a 94/95, i'd need the air tube to go straight back. could k&n make them or are they only filters? are there universal setups for shakers?
It's always fun until someone loses an eye. then it's fun ya can't see.

-James Hetfield back when metallica was still making good music.

need a shaker scoop

Reply #6 –
Good luck.For one of these,it wouldn't be hard to move the tube.K&N doesn't have them.They are really hard to find.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..
 

need a shaker scoop

Reply #7 –
What about a Mach 1 setup from a couple of years ago?they are on Ebay quite often.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

need a shaker scoop

Reply #8 –
got a pick?
It's always fun until someone loses an eye. then it's fun ya can't see.

-James Hetfield back when metallica was still making good music.

need a shaker scoop

Reply #9 –
here's the item number I found.270208793093.It comes with the hood,but if you wanted it bad enough,perhaps he'd deal with you .
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

need a shaker scoop

Reply #10 –
would it be easier/ cheaper to get one of the 99 mustang shakers or get a scoop, make a box with a black plastic sheet and k&n filter and fit it like your 2.3 turbo air filters? that way i'd have a choice of scoops and it'd easier to find. price tags on that mustang shaker are a little more than i had in mind.
It's always fun until someone loses an eye. then it's fun ya can't see.

-James Hetfield back when metallica was still making good music.

need a shaker scoop

Reply #11 –
I haven't seen a cheap scoop even by itself.Thay are obviously worth their weight in cash.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

need a shaker scoop

Reply #12 –
i think i'll try the 2.3 turbo's air filter setup (seals to the hood) with a scoop instead. shaker would be nice, but too pricy.
It's always fun until someone loses an eye. then it's fun ya can't see.

-James Hetfield back when metallica was still making good music.

need a shaker scoop

Reply #13 –
The filter doesn't seal to the hood,the intercooler does.Sorry if that's a set back.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

need a shaker scoop

Reply #14 –
oh. well it looks like an air filter. guess i can just use my gallon bucket-sized k&n and a scoop. much easier.
It's always fun until someone loses an eye. then it's fun ya can't see.

-James Hetfield back when metallica was still making good music.