Re: How would fox stang lights fit? Reply #15 – February 03, 2005, 10:13:00 AM They wont fit, as was said before. And if you did all the work to mount them, why in the heck would you want to hide them behind covers?? I would fit them in some custom enclosures in the front, paint them (The housings ) and try to keep the adjustments working. It would be pretty sick to see lets say.... 03 or 04 mustang lights tucked into a t-bird front end. Just do it right the first time, or you will probly regret it in the future. Quote Selected
Re: How would fox stang lights fit? Reply #16 – February 03, 2005, 10:37:25 AM every aspect except the light socket inside is different, i tryed with my buddys lights, i had a hard enough time fitting the headlight rubber gasket around my light from a mustang. i was thinking of trying to make a metal housing and find somebody that could do glass for the lens so i could run a brighter (much brighter) bulb or 2 in their without changeing the aerodynamic apearance of the stock lights. like i said before, and i agree with masterblaster, i like to be able to see at nite, and these plastic houseings are getting in my way of that... Quote Selected
Re: How would fox stang lights fit? Reply #17 – February 03, 2005, 01:54:35 PM you guys are kinda missing the point. as we all know, nobody makes any kind of lights for the Tbirds or cougars, but there are plenty of aftermarket ones for the stangs. my idea was, if the stang lights aren't too far off size-wise, figure some way to mount them in my Tbird. I was looking at the projector lights, they'd be a 1000x improvement over the stock py headlights. I asked if anybody had tried seeing how they fit between the corner and inner lights, to know whether I was wasting my time or not. guess I'll have to go to the junkyard and see if any of the stang lights will fit the Tbirds there, and go from there Quote Selected
Re: How would fox stang lights fit? Reply #18 – February 03, 2005, 04:19:32 PM Quote from: MasterBlasterPS: If I ever get off my lazy butt, I'll make some filler panels to cover the inside open space.Quote from: MasterBlaster... for the last 9 years. 8 1/2 with the Franken-lights in there.....after 8 1/2 years, it's very doubtful that you will anytime soon..... :giggle: Quote Selected
Re: How would fox stang lights fit? Reply #19 – February 03, 2005, 05:45:55 PM Simple response,NO THEY WON'T FIT,anything can be modiefied but it will look stupid.Sorry to be rude but this thread keeps continuing and it's obvious they won't fit.Either make them work or don't. Quote Selected
Re: How would fox stang lights fit? Reply #20 – February 03, 2005, 06:21:18 PM someone is being a poopie pants Quote Selected
Re: How would fox stang lights fit? Reply #21 – February 03, 2005, 06:31:34 PM Quote from: Tbird232cisomeone is being a poopie pantsTehehehe Quote Selected
Re: How would fox stang lights fit? Reply #22 – February 03, 2005, 06:32:15 PM No just sick of him asking if they fit when he doesn't get the hint that everyone is telling him they won't work. Quote Selected
Re: How would fox stang lights fit? Reply #23 – February 03, 2005, 06:43:50 PM Yay! Just like Cougarsluts! Let's argue more!!! Quote Selected
Re: How would fox stang lights fit? Reply #24 – February 03, 2005, 06:55:38 PM Quote from: dominatorNo just sick of him asking if they fit when he doesn't get the hint that everyone is telling him they won't work.if you're so sick of it, GTFO. you have been of no help in this thread. I keep asking because I want to know how badly they don't fit. It's pretty obvious they aren't going to bolt right in, I knew that before even asking. if they did bolt right in we'd all have 'stang replacements in there the day after the first night in the car. and you may think it'd look stupid, but like I said, you have yet to show any proof of that. since cougars2go won't even respond to my pms asking for just the place he got the lights, I have to go a different route, and mustang replacements seem to be as simple as modifying where they mount and, if they're far off enough to look really awkward, put some smoked covers over it. Quote Selected
Re: How would fox stang lights fit? Reply #25 – February 03, 2005, 07:00:34 PM Makes sense to me. :ies: Quote Selected
Re: How would fox stang lights fit? Reply #26 – February 03, 2005, 07:21:32 PM Somebody wanna lock this? It's REAL pointless at this... point. Quote Selected
Re: How would fox stang lights fit? Reply #27 – February 03, 2005, 07:32:41 PM no, as long as dominator keeps his pointless posts out of here it's fine. but I doubt I'm the first to think of modifying the panel to get stang headlights in there, I'm not a very original thinker if push comes to shove, I'm sure the part that the headlight bolts to can be cut out of a mustang and welded into the Tbird header panel, and voila they fit. if the lights are shallower than the Tbirds, some spacers or even just welding the plate farther forward. sound like this would work or am I wasting my time dreaming these things up? Quote Selected
Re: How would fox stang lights fit? Reply #28 – February 03, 2005, 07:39:52 PM last i knew you could get aftermarket stock replacement headlights for a 87-88 tbird rather easilly on ebay, allbeit at a hefty cost. something like 150 a set. Quote Selected
Re: How would fox stang lights fit? Reply #29 – February 03, 2005, 07:43:52 PM Quote from: shame302last i knew you could get aftermarket stock replacement headlights for a 87-88 tbird rather easilly on ebay, allbeit at a hefty cost. something like 150 a set.Um, $130 after shipping! Ask me how I know!!!! Quote Selected
Topic: How would fox stang lights fit? (Read 9458 times)
previous topic - next topic
