A little Mustang update Reply #90 – May 09, 2007, 11:04:20 PM Looking real goooood keep up the work! Quote Selected
A little Mustang update Reply #91 – May 09, 2007, 11:04:46 PM Quote from: turb0coupe88;146157wow, im in love with your cars.Ill sell you my collection :flame: J/k Thanks:D Quote Selected
A little Mustang update Reply #92 – May 09, 2007, 11:09:48 PM making good progress. good job! what are the specs on the motor and carb? Quote Selected
A little Mustang update Reply #93 – May 09, 2007, 11:22:29 PM Quote from: 32VFoxBird;146165making good progress. good job! what are the specs on the motor and carb?89 mustang 2.3 blockTurbocoupe rods and pistonsE41K ring setclevite bearingsN/A head with the chambers opened to unshroud the valves1.89/1.60 valves .100 thou longer.500 lift lunati camshaftLunati dual springsClevite lifters and tappetsHome done port jobThats about it I want to push the stock shortblocks limits before i drop big coin into a stroker.The carb is a 600 double pumper i got from mikey, Setup for blowthrough i also changed the boosters and rebuilt it myself Quote Selected
A little Mustang update Reply #94 – May 10, 2007, 11:32:09 PM down pipe is done,Going to drive it tommorow afternoon and see were the A/F ratio is at Quote Selected
A little Mustang update Reply #95 – May 10, 2007, 11:35:38 PM Where do you buy your intake tubing? That is some fast and clean work. Im amazed. Quote Selected
A little Mustang update Reply #97 – May 11, 2007, 12:02:08 AM Quote from: cougrrr302;146395Where do you buy your intake tubing? That is some fast and clean work. Im amazed.I usually get hookers or dynomax mild steel mandrel bends.I order them from a local speed shop cause they usually get the stuff next day as opposed to 2-3 days from jegs or summit:hick: Thanks man,I take out my stress by building these clunkers:toilet: Quote Selected
A little Mustang update Reply #98 – May 11, 2007, 12:02:37 AM Quote from: 84 Fila;146396So now your done.....Yes,other then the tuning that will be involved it is done. Quote Selected
A little Mustang update Reply #99 – May 11, 2007, 12:16:06 AM bitchin...,. can I get a ride? Quote Selected
A little Mustang update Reply #100 – May 11, 2007, 12:21:41 AM Quote from: 84 Fila;146403bitchin...,. can I get a ride? Quote Selected
A little Mustang update Reply #101 – May 11, 2007, 10:50:08 PM after i got the air fuel in check this sum bitch runs!I should had done a carb blow through a while back Quote Selected
Topic: A little Mustang update (Read 12375 times)
previous topic - next topic
